[PATCH 3/6] phy: ti: gmii-sel: Add support for CPSW9G GMII SEL in J721e

Siddharth Vadapalli s-vadapalli at ti.com
Wed Sep 14 02:39:08 PDT 2022


Each of the CPSW9G ports in J721e support additional modes like QSGMII.
Add a new compatible for J721e to support the additional modes.

In TI's J721e, each of the CPSW9G ethernet interfaces can act as a
QSGMII main or QSGMII-SUB port. The QSGMII main interface is responsible
for performing auto-negotiation between the MAC and the PHY while the rest
of the interfaces are designated as QSGMII-SUB interfaces, indicating that
they will not be taking part in the auto-negotiation process.

Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
---
 drivers/phy/ti/phy-gmii-sel.c | 47 +++++++++++++++++++++++++++--------
 1 file changed, 37 insertions(+), 10 deletions(-)

diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c
index f0b2ba7a9c96..fdb1a7db123d 100644
--- a/drivers/phy/ti/phy-gmii-sel.c
+++ b/drivers/phy/ti/phy-gmii-sel.c
@@ -223,6 +223,13 @@ struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw5g_soc_j7200 = {
 	.extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII) | BIT(PHY_INTERFACE_MODE_SGMII),
 };
 
+static const
+struct phy_gmii_sel_soc_data phy_gmii_sel_cpsw9g_soc_j721e = {
+	.use_of_data = true,
+	.regfields = phy_gmii_sel_fields_am654,
+	.extra_modes = BIT(PHY_INTERFACE_MODE_QSGMII),
+};
+
 static const struct of_device_id phy_gmii_sel_id_table[] = {
 	{
 		.compatible	= "ti,am3352-phy-gmii-sel",
@@ -248,6 +255,10 @@ static const struct of_device_id phy_gmii_sel_id_table[] = {
 		.compatible	= "ti,j7200-cpsw5g-phy-gmii-sel",
 		.data		= &phy_gmii_sel_cpsw5g_soc_j7200,
 	},
+	{
+		.compatible	= "ti,j721e-cpsw9g-phy-gmii-sel",
+		.data		= &phy_gmii_sel_cpsw9g_soc_j721e,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(of, phy_gmii_sel_id_table);
@@ -389,7 +400,7 @@ static int phy_gmii_sel_probe(struct platform_device *pdev)
 	struct device_node *node = dev->of_node;
 	const struct of_device_id *of_id;
 	struct phy_gmii_sel_priv *priv;
-	u32 main_ports = 1;
+	u32 main_ports[2] = {1, 1};
 	int ret;
 
 	of_id = of_match_node(phy_gmii_sel_id_table, pdev->dev.of_node);
@@ -403,15 +414,31 @@ static int phy_gmii_sel_probe(struct platform_device *pdev)
 	priv->dev = &pdev->dev;
 	priv->soc_data = of_id->data;
 	priv->num_ports = priv->soc_data->num_ports;
-	of_property_read_u32(node, "ti,qsgmii-main-ports", &main_ports);
-	/*
-	 * Ensure that main_ports is within bounds. If the property
-	 * ti,qsgmii-main-ports is not mentioned, or the value mentioned
-	 * is out of bounds, default to 1.
-	 */
-	if (main_ports < 1 || main_ports > 4)
-		main_ports = 1;
-	priv->qsgmii_main_ports = PHY_GMII_PORT(main_ports);
+	/* Differentiate between J7200 CPSW5G and J721e CPSW9G */
+	if (of_device_is_compatible(node, "ti,j7200-cpsw5g-phy-gmii-sel") > 0) {
+		of_property_read_u32(node, "ti,qsgmii-main-ports", &main_ports[0]);
+		/*
+		 * Ensure that main_ports is within bounds. If the property
+		 * ti,qsgmii-main-ports is not mentioned, or the value mentioned
+		 * is out of bounds, default to 1.
+		 */
+		if (main_ports[0] < 1 || main_ports[0] > 4)
+			main_ports[0] = 1;
+		priv->qsgmii_main_ports = PHY_GMII_PORT(main_ports[0]);
+	} else if (of_device_is_compatible(node, "ti,j721e-cpsw9g-phy-gmii-sel") > 0) {
+		of_property_read_u32_array(node, "ti,qsgmii-main-ports", &main_ports[0], 2);
+		/*
+		 * Ensure that main_ports is within bounds. If the property
+		 * ti,qsgmii-main-ports is not mentioned, or the value mentioned
+		 * is out of bounds, default to 1.
+		 */
+		if (main_ports[0] < 1 || main_ports[0] > 8)
+			main_ports[0] = 1;
+		if (main_ports[1] < 1 || main_ports[1] > 8)
+			main_ports[1] = 1;
+		priv->qsgmii_main_ports = PHY_GMII_PORT(main_ports[0]);
+		priv->qsgmii_main_ports |= PHY_GMII_PORT(main_ports[1]);
+	}
 
 	priv->regmap = syscon_node_to_regmap(node->parent);
 	if (IS_ERR(priv->regmap)) {
-- 
2.25.1




More information about the linux-phy mailing list