[PATCH v6 3/5] phy: core: Add support for phy power down & power up

Vinod Koul vkoul at kernel.org
Tue Sep 13 07:58:15 PDT 2022


On 09-09-22, 14:14, Krishna chaitanya chundru wrote:
> Introducing phy power down/up callbacks for allowing to park the
> link-state in L1ss without holding any PCIe resources during
> system suspend.

where is the rest of the series, pls cc relevant folks on cover at
least!

> 
> Signed-off-by: Krishna chaitanya chundru <quic_krichai at quicinc.com>
> ---
>  drivers/phy/phy-core.c  | 30 ++++++++++++++++++++++++++++++
>  include/linux/phy/phy.h | 20 ++++++++++++++++++++
>  2 files changed, 50 insertions(+)
> 
> diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
> index d93ddf1..1b0b757 100644
> --- a/drivers/phy/phy-core.c
> +++ b/drivers/phy/phy-core.c
> @@ -441,6 +441,36 @@ int phy_set_speed(struct phy *phy, int speed)
>  }
>  EXPORT_SYMBOL_GPL(phy_set_speed);
>  
> +int phy_power_down(struct phy *phy)
> +{
> +	int ret;
> +
> +	if (!phy || !phy->ops->power_down)
> +		return 0;
> +
> +	mutex_lock(&phy->mutex);
> +	ret = phy->ops->power_down(phy);
> +	mutex_unlock(&phy->mutex);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(phy_power_down);

I dont think this is a good idea as Dmitry already updated...

> +
> +int phy_power_up(struct phy *phy)
> +{
> +	int ret;
> +
> +	if (!phy || !phy->ops->power_up)
> +		return 0;
> +
> +	mutex_lock(&phy->mutex);
> +	ret = phy->ops->power_up(phy);
> +	mutex_unlock(&phy->mutex);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(phy_power_up);
> +
>  int phy_reset(struct phy *phy)
>  {
>  	int ret;
> diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
> index b141375..3a45f4d 100644
> --- a/include/linux/phy/phy.h
> +++ b/include/linux/phy/phy.h
> @@ -76,6 +76,8 @@ union phy_configure_opts {
>   * @set_mode: set the mode of the phy
>   * @set_media: set the media type of the phy (optional)
>   * @set_speed: set the speed of the phy (optional)
> + * @power_down: parking the phy in power down state
> + * @power_up: pulling back the phy from power down
>   * @reset: resetting the phy
>   * @calibrate: calibrate the phy
>   * @release: ops to be performed while the consumer relinquishes the PHY
> @@ -89,6 +91,8 @@ struct phy_ops {
>  	int	(*set_mode)(struct phy *phy, enum phy_mode mode, int submode);
>  	int	(*set_media)(struct phy *phy, enum phy_media media);
>  	int	(*set_speed)(struct phy *phy, int speed);
> +	int	(*power_down)(struct phy *phy);
> +	int	(*power_up)(struct phy *phy);
>  
>  	/**
>  	 * @configure:
> @@ -226,6 +230,8 @@ int phy_init(struct phy *phy);
>  int phy_exit(struct phy *phy);
>  int phy_power_on(struct phy *phy);
>  int phy_power_off(struct phy *phy);
> +int phy_power_down(struct phy *phy);
> +int phy_power_up(struct phy *phy);
>  int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode);
>  #define phy_set_mode(phy, mode) \
>  	phy_set_mode_ext(phy, mode, 0)
> @@ -349,6 +355,20 @@ static inline int phy_power_off(struct phy *phy)
>  	return -ENOSYS;
>  }
>  
> +static inline int phy_power_down(struct phy *phy)
> +{
> +	if (!phy)
> +		return 0;
> +	return -ENOSYS;
> +}
> +
> +static inline int phy_power_up(struct phy *phy)
> +{
> +	if (!phy)
> +		return 0;
> +	return -ENOSYS;
> +}
> +
>  static inline int phy_set_mode_ext(struct phy *phy, enum phy_mode mode,
>  				   int submode)
>  {
> -- 
> 2.7.4

-- 
~Vinod



More information about the linux-phy mailing list