[PATCH 1/6] dt-bindings: phy: qcom,hdmi-phy-other: use pxo clock

[Krzysztof Kozlowski]

On 09/09/2022 15:20, Dmitry Baryshkov wrote:
> Add pxo clock to the 8960 bindings (used by the HDMI PLL)
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>  .../bindings/phy/qcom,hdmi-phy-other.yaml     | 23 ++++++++++++++++---
>  1 file changed, 20 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
> index fdb277edebeb..2c21e120ff8d 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
> @@ -53,7 +53,6 @@ allOf:
>            contains:
>              enum:
>                - qcom,hdmi-phy-8660
> -              - qcom,hdmi-phy-8960
>      then:
>        properties:
>          clocks:
> @@ -63,6 +62,24 @@ allOf:
>              - const: slave_iface
>          vddio-supply: false
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,hdmi-phy-8960
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 1
> +          maxItems: 2
> +        clock-names:
> +          minItems: 1
> +          items:
> +            - const: slave_iface
> +            - const: pxo

Why pxo is optional? Commit msg does not say much here.

It seems you also miss the DTS change adding the clock.

Best regards,
Krzysztof