[PATCH v5 6/8] arm64: dts: ls1088a: Add serdes bindings

Sean Anderson sean.anderson at seco.com
Fri Sep 2 14:37:19 PDT 2022


This adds bindings for the SerDes devices. They are disabled by default
to prevent any breakage on existing boards.

Signed-off-by: Sean Anderson <sean.anderson at seco.com>
---

(no changes since v4)

Changes in v4:
- Convert to new bindings

Changes in v3:
- New

 arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 421d879013d7..3810d66f8725 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -238,6 +238,24 @@ reset: syscon at 1e60000 {
 			reg = <0x0 0x1e60000 0x0 0x10000>;
 		};
 
+		serdes1: serdes at 1ea0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			compatible = "fsl,ls1088a-serdes", "fsl,lynx-10g";
+			reg = <0x0 0x1ea0000 0x0 0x2000>;
+			status = "disabled";
+		};
+
+		serdes2: serdes at 1eb0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+			compatible = "fsl,ls1088a-serdes", "fsl,lynx-10g";
+			reg = <0x0 0x1eb0000 0x0 0x2000>;
+			status = "disabled";
+		};
+
 		isc: syscon at 1f70000 {
 			compatible = "fsl,ls1088a-isc", "syscon";
 			reg = <0x0 0x1f70000 0x0 0x10000>;
-- 
2.35.1.1320.gc452695387.dirty




More information about the linux-phy mailing list