[RFC PATCH v2 1/3] dt-bindings: phy: qcom,qmp-usb3-dp: Add sm6350 compatible

[Luca Weiss]

Add the compatible describing the combo phy found on SM6350.

Signed-off-by: Luca Weiss <luca.weiss at fairphone.com>
---
@Johan Hovold, I've sent this v2 as RFC because there are several things
where I have questions on how it should be done.

In this patch, you can see there's cfg_ahb (&xo_board) and power-domains
is not set. In msm-4.19 &gcc_usb30_prim_gdsc is only used in the
ssusb at a600000 node, or should I also add it to qmpphy?

 .../bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml          | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
index 6f31693d9868..3e39e3e0504d 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
@@ -17,16 +17,18 @@ properties:
   compatible:
     enum:
       - qcom,sc8280xp-qmp-usb43dp-phy
+      - qcom,sm6350-qmp-usb3-dp-phy
 
   reg:
     maxItems: 1
 
   clocks:
-    maxItems: 4
+    maxItems: 5
 
   clock-names:
     items:
       - const: aux
+      - const: cfg_ahb
       - const: ref
       - const: com_aux
       - const: usb3_pipe
@@ -61,7 +63,6 @@ required:
   - reg
   - clocks
   - clock-names
-  - power-domains
   - resets
   - reset-names
   - vdda-phy-supply
-- 
2.38.1