[PATCH 01/10] phy: qcom-qmp: qserdes-com: Add v6 register offsets
Vinod Koul
vkoul at kernel.org
Thu Nov 24 09:54:37 PST 2022
On 16-11-22, 14:01, Abel Vesa wrote:
> The new SM8550 SoC bumps up the HW version of QMP phy to v6 for USB,
> UFS and PCIE g3x2, and v6.20 for PCIE g4x2. Add the new offsets to
> each table dedicated file.
>
> Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
> ---
> .../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h | 15 ++++
> .../qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h | 23 ++++++
> .../phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h | 31 ++++++++
> .../phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h | 31 ++++++++
> drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h | 16 ++++
> drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h | 18 +++++
> .../qualcomm/phy-qcom-qmp-qserdes-com-v6.h | 75 +++++++++++++++++++
> .../phy-qcom-qmp-qserdes-ln-shrd-v6.h | 32 ++++++++
> .../phy-qcom-qmp-qserdes-txrx-ufs-v6.h | 30 ++++++++
> .../qualcomm/phy-qcom-qmp-qserdes-txrx-v6.h | 68 +++++++++++++++++
> .../phy-qcom-qmp-qserdes-txrx-v6_20.h | 45 +++++++++++
> drivers/phy/qualcomm/phy-qcom-qmp.h | 13 ++++
> 12 files changed, 397 insertions(+)
Can we split this to per driver please, pref to add with the driver use
> create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h
> create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
> create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h
> create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
> create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
> create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h
> create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h
> create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
> create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
> create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6.h
> create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h
> new file mode 100644
> index 000000000000..b00c47e323d8
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6.h
> @@ -0,0 +1,15 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2022, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef QCOM_PHY_QMP_PCS_PCIE_V6_H_
> +#define QCOM_PHY_QMP_PCS_PCIE_V6_H_
> +
> +/* Only for QMP V6 PHY - PCIE have different offsets than V5 */
> +#define QPHY_PCIE_V6_PCS_PCIE_POWER_STATE_CONFIG2 0x0c
> +#define QPHY_PCIE_V6_PCS_PCIE_POWER_STATE_CONFIG4 0x14
> +#define QPHY_PCIE_V6_PCS_PCIE_ENDPOINT_REFCLK_DRIVE 0x20
> +#define QPHY_PCIE_V6_PCS_PCIE_OSC_DTCT_ACTIONS 0x94
> +
> +#endif
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
> new file mode 100644
> index 000000000000..332d7539899d
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v6_20.h
> @@ -0,0 +1,23 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2022, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef QCOM_PHY_QMP_PCS_PCIE_V6_20_H_
> +#define QCOM_PHY_QMP_PCS_PCIE_V6_20_H_
> +
> +/* Only for QMP V6_20 PHY - PCIE have different offsets than V5 */
> +#define QPHY_PCIE_V6_20_PCS_POWER_STATE_CONFIG2 0x00c
> +#define QPHY_PCIE_V6_20_PCS_TX_RX_CONFIG 0x018
> +#define QPHY_PCIE_V6_20_PCS_ENDPOINT_REFCLK_DRIVE 0x01c
> +#define QPHY_PCIE_V6_20_PCS_OSC_DTCT_ATCIONS 0x090
> +#define QPHY_PCIE_V6_20_PCS_EQ_CONFIG1 0x0a0
> +#define QPHY_PCIE_V6_20_PCS_EQ_CONFIG5 0x108
> +#define QPHY_PCIE_V6_20_PCS_G4_PRE_GAIN 0x15c
> +#define QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG1 0x17c
> +#define QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG3 0x184
> +#define QPHY_PCIE_V6_20_PCS_RX_MARGINING_CONFIG5 0x18c
> +#define QPHY_PCIE_V6_20_PCS_G3_FOM_EQ_CONFIG5 0x1ac
> +#define QPHY_PCIE_V6_20_PCS_G4_FOM_EQ_CONFIG5 0x1c0
> +
> +#endif
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h
> new file mode 100644
> index 000000000000..dde8830257b5
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h
> @@ -0,0 +1,31 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2022, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef QCOM_PHY_QMP_PCS_UFS_V6_H_
> +#define QCOM_PHY_QMP_PCS_UFS_V6_H_
> +
> +/* Only for QMP V6 PHY - UFS PCS registers */
> +#define QPHY_V6_PCS_UFS_PHY_START 0x000
> +#define QPHY_V6_PCS_UFS_POWER_DOWN_CONTROL 0x004
> +#define QPHY_V6_PCS_UFS_SW_RESET 0x008
> +#define QPHY_V6_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB 0x00c
> +#define QPHY_V6_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB 0x010
> +#define QPHY_V6_PCS_UFS_PLL_CNTL 0x02c
> +#define QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL 0x030
> +#define QPHY_V6_PCS_UFS_TX_SMALL_AMP_DRV_LVL 0x038
> +#define QPHY_V6_PCS_UFS_BIST_FIXED_PAT_CTRL 0x060
> +#define QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY 0x074
> +#define QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY 0x0bc
> +#define QPHY_V6_PCS_UFS_DEBUG_BUS_CLKSEL 0x158
> +#define QPHY_V6_PCS_UFS_LINECFG_DISABLE 0x17c
> +#define QPHY_V6_PCS_UFS_RX_MIN_HIBERN8_TIME 0x184
> +#define QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2 0x18c
> +#define QPHY_V6_PCS_UFS_TX_PWM_GEAR_BAND 0x178
> +#define QPHY_V6_PCS_UFS_TX_HS_GEAR_BAND 0x174
> +#define QPHY_V6_PCS_UFS_READY_STATUS 0x1a8
> +#define QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1 0x1f4
> +#define QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1 0x1fc
> +
> +#endif
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
> new file mode 100644
> index 000000000000..9510e63ba9d8
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v6.h
> @@ -0,0 +1,31 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2022, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef QCOM_PHY_QMP_PCS_USB_V6_H_
> +#define QCOM_PHY_QMP_PCS_USB_V6_H_
> +
> +/* Only for QMP V6 PHY - USB3 have different offsets than V5 */
> +#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG1 0xc4
> +#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG2 0xc8
> +#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG3 0xcc
> +#define QPHY_USB_V6_PCS_LOCK_DETECT_CONFIG6 0xd8
> +#define QPHY_USB_V6_PCS_REFGEN_REQ_CONFIG1 0xdc
> +#define QPHY_USB_V6_PCS_USB3_POWER_STATE_CONFIG1 0x90
> +#define QPHY_USB_V6_PCS_RX_SIGDET_LVL 0x188
> +#define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_L 0x190
> +#define QPHY_USB_V6_PCS_RCVR_DTCT_DLY_P1U2_H 0x194
> +#define QPHY_USB_V6_PCS_CDR_RESET_TIME 0x1b0
> +#define QPHY_USB_V6_PCS_ALIGN_DETECT_CONFIG1 0x1c0
> +#define QPHY_USB_V6_PCS_ALIGN_DETECT_CONFIG2 0x1c4
> +#define QPHY_USB_V6_PCS_PCS_TX_RX_CONFIG 0x1d0
> +#define QPHY_USB_V6_PCS_EQ_CONFIG1 0x1dc
> +#define QPHY_USB_V6_PCS_EQ_CONFIG5 0x1ec
> +
> +#define QPHY_USB_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x18
> +#define QPHY_USB_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x3c
> +#define QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x40
> +#define QPHY_USB_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H 0x44
> +
> +#endif
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
> new file mode 100644
> index 000000000000..c6c42a0f1509
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6.h
> @@ -0,0 +1,16 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2022, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef QCOM_PHY_QMP_PCS_V6_H_
> +#define QCOM_PHY_QMP_PCS_V6_H_
> +
> +/* Only for QMP V6 PHY - USB/PCIe PCS registers */
> +#define QPHY_V6_PCS_REFGEN_REQ_CONFIG1 0xdc
> +#define QPHY_V6_PCS_RX_SIGDET_LVL 0x188
> +#define QPHY_V6_PCS_RATE_SLEW_CNTRL1 0x198
> +#define QPHY_V6_PCS_EQ_CONFIG2 0x1e0
> +#define QPHY_V6_PCS_PCS_TX_RX_CONFIG 0x1d0
> +
> +#endif
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h
> new file mode 100644
> index 000000000000..084752d9f0fc
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v6_20.h
> @@ -0,0 +1,18 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2022, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef QCOM_PHY_QMP_PCS_V6_20_H_
> +#define QCOM_PHY_QMP_PCS_V6_20_H_
> +
> +/* Only for QMP V6_20 PHY - USB/PCIe PCS registers */
> +#define QPHY_V6_20_PCS_G3S2_PRE_GAIN 0x178
> +#define QPHY_V6_20_PCS_RX_SIGDET_LVL 0x190
> +#define QPHY_V6_20_PCS_COM_ELECIDLE_DLY_SEL 0x1b8
> +#define QPHY_V6_20_PCS_TX_RX_CONFIG1 0x1dc
> +#define QPHY_V6_20_PCS_TX_RX_CONFIG2 0x1e0
> +#define QPHY_V6_20_PCS_EQ_CONFIG4 0x1f8
> +#define QPHY_V6_20_PCS_EQ_CONFIG5 0x1fc
> +
> +#endif
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h
> new file mode 100644
> index 000000000000..1b926812461f
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h
> @@ -0,0 +1,75 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2022, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef QCOM_PHY_QMP_QSERDES_COM_V6_H_
> +#define QCOM_PHY_QMP_QSERDES_COM_V6_H_
> +
> +/* Only for QMP V6 PHY - QSERDES COM registers */
> +
> +#define QSERDES_V6_COM_SSC_STEP_SIZE1_MODE1 0x00
> +#define QSERDES_V6_COM_SSC_STEP_SIZE2_MODE1 0x04
> +#define QSERDES_V6_COM_CP_CTRL_MODE1 0x10
> +#define QSERDES_V6_COM_PLL_RCTRL_MODE1 0x14
> +#define QSERDES_V6_COM_PLL_CCTRL_MODE1 0x18
> +#define QSERDES_V6_COM_CORECLK_DIV_MODE1 0x1c
> +#define QSERDES_V6_COM_LOCK_CMP1_MODE1 0x20
> +#define QSERDES_V6_COM_LOCK_CMP2_MODE1 0x24
> +#define QSERDES_V6_COM_DEC_START_MODE1 0x28
> +#define QSERDES_V6_COM_DEC_START_MSB_MODE1 0x2c
> +#define QSERDES_V6_COM_DIV_FRAC_START1_MODE1 0x30
> +#define QSERDES_V6_COM_DIV_FRAC_START2_MODE1 0x34
> +#define QSERDES_V6_COM_DIV_FRAC_START3_MODE1 0x38
> +#define QSERDES_V6_COM_HSCLK_SEL_1 0x3c
> +#define QSERDES_V6_COM_VCO_TUNE1_MODE1 0x48
> +#define QSERDES_V6_COM_VCO_TUNE2_MODE1 0x4c
> +#define QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE1 0x50
> +#define QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE1 0x54
> +#define QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE1_MODE0 0x58
> +#define QSERDES_V6_COM_BIN_VCOCAL_CMP_CODE2_MODE0 0x5c
> +#define QSERDES_V6_COM_SSC_STEP_SIZE1_MODE0 0x60
> +#define QSERDES_V6_COM_SSC_STEP_SIZE2_MODE0 0x64
> +#define QSERDES_V6_COM_CP_CTRL_MODE0 0x70
> +#define QSERDES_V6_COM_PLL_RCTRL_MODE0 0x74
> +#define QSERDES_V6_COM_PLL_CCTRL_MODE0 0x78
> +#define QSERDES_V6_COM_PLL_CORE_CLK_DIV_MODE0 0x7c
> +#define QSERDES_V6_COM_LOCK_CMP1_MODE0 0x80
> +#define QSERDES_V6_COM_LOCK_CMP2_MODE0 0x84
> +#define QSERDES_V6_COM_DEC_START_MODE0 0x88
> +#define QSERDES_V6_COM_DEC_START_MSB_MODE0 0x8c
> +#define QSERDES_V6_COM_DIV_FRAC_START1_MODE0 0x90
> +#define QSERDES_V6_COM_DIV_FRAC_START2_MODE0 0x94
> +#define QSERDES_V6_COM_DIV_FRAC_START3_MODE0 0x98
> +#define QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1 0x9c
> +#define QSERDES_V6_COM_VCO_TUNE1_MODE0 0xa8
> +#define QSERDES_V6_COM_VCO_TUNE2_MODE0 0xac
> +#define QSERDES_V6_COM_BG_TIMER 0xbc
> +#define QSERDES_V6_COM_SSC_EN_CENTER 0xc0
> +#define QSERDES_V6_COM_SSC_PER1 0xcc
> +#define QSERDES_V6_COM_SSC_PER2 0xd0
> +#define QSERDES_V6_COM_PLL_POST_DIV_MUX 0xd8
> +#define QSERDES_V6_COM_PLL_BIAS_EN_CLK_BUFLR_EN 0xdc
> +#define QSERDES_V6_COM_CLK_ENABLE1 0xe0
> +#define QSERDES_V6_COM_SYS_CLK_CTRL 0xe4
> +#define QSERDES_V6_COM_SYSCLK_BUF_ENABLE 0xe8
> +#define QSERDES_V6_COM_PLL_IVCO 0xf4
> +#define QSERDES_V6_COM_SYSCLK_EN_SEL 0x110
> +#define QSERDES_V6_COM_LOCK_CMP_EN 0x120
> +#define QSERDES_V6_COM_LOCK_CMP_CFG 0x124
> +#define QSERDES_V6_COM_VCO_TUNE_MAP 0x140
> +#define QSERDES_V6_COM_VCO_TUNE_INITVAL2 0x148
> +#define QSERDES_V6_COM_CLK_SELECT 0x164
> +#define QSERDES_V6_COM_CORE_CLK_EN 0x170
> +#define QSERDES_V6_COM_CMN_CONFIG_1 0x174
> +#define QSERDES_V6_COM_CMN_MISC_1 0x184
> +#define QSERDES_V6_COM_CMN_MODE 0x188
> +#define QSERDES_V6_COM_PLL_VCO_DC_LEVEL_CTRL 0x198
> +#define QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_1 0x1a4
> +#define QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_2 0x1a8
> +#define QSERDES_V6_COM_AUTO_GAIN_ADJ_CTRL_3 0x1ac
> +#define QSERDES_V6_COM_ADDITIONAL_MISC 0x1b4
> +#define QSERDES_V6_COM_ADDITIONAL_MISC_2 0x1b8
> +#define QSERDES_V6_COM_ADDITIONAL_MISC_3 0x1bc
> +
> +#endif
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
> new file mode 100644
> index 000000000000..51bb34e944cb
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h
> @@ -0,0 +1,32 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2022, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_
> +#define QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_
> +
> +#define QSERDES_V6_LN_SHRD_RXCLK_DIV2_CTRL 0xa0
> +#define QSERDES_V6_LN_SHRD_RX_Q_EN_RATES 0xb0
> +#define QSERDES_V6_LN_SHRD_DFE_DAC_ENABLE1 0xb4
> +#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH1 0xc4
> +#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH2 0xc8
> +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B0 0xd4
> +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B1 0xd8
> +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B2 0xdc
> +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B3 0xe0
> +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B4 0xe4
> +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B5 0xe8
> +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B6 0xec
> +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE210 0xf0
> +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE3 0xf4
> +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE210 0xf8
> +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE3 0xfc
> +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE210 0x100
> +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE3 0x104
> +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH4_RATE3 0x10c
> +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH5_RATE3 0x114
> +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH6_RATE3 0x11c
> +#define QSERDES_V6_LN_SHRD_RX_SUMMER_CAL_SPD_MODE 0x128
> +
> +#endif
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
> new file mode 100644
> index 000000000000..e4d38fefdf18
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h
> @@ -0,0 +1,30 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2022, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef QCOM_PHY_QMP_QSERDES_TXRX_UFS_V6_H_
> +#define QCOM_PHY_QMP_QSERDES_TXRX_UFS_V6_H_
> +
> +#define QSERDES_UFS_V6_TX_RES_CODE_LANE_TX 0x28
> +#define QSERDES_UFS_V6_TX_RES_CODE_LANE_RX 0x2c
> +#define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX 0x30
> +#define QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_RX 0x34
> +#define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2 0x08
> +#define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4 0x10
> +
> +#define QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL 0x178
> +#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0 0x208
> +#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1 0x20c
> +#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3 0x214
> +#define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B6 0x220
> +#define QSERDES_UFS_V6_RX_MODE_RATE2_B3 0x238
> +#define QSERDES_UFS_V6_RX_MODE_RATE2_B6 0x244
> +#define QSERDES_UFS_V6_RX_MODE_RATE3_B3 0x25c
> +#define QSERDES_UFS_V6_RX_MODE_RATE3_B4 0x260
> +#define QSERDES_UFS_V6_RX_MODE_RATE3_B5 0x264
> +#define QSERDES_UFS_V6_RX_MODE_RATE3_B8 0x270
> +#define QSERDES_UFS_V6_RX_MODE_RATE4_B3 0x280
> +#define QSERDES_UFS_V6_RX_MODE_RATE4_B6 0x28c
> +
> +#endif
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6.h
> new file mode 100644
> index 000000000000..a51bc8b5a693
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6.h
> @@ -0,0 +1,68 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2022, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef QCOM_PHY_QMP_QSERDES_TXRX_USB_V6_H_
> +#define QCOM_PHY_QMP_QSERDES_TXRX_USB_V6_H_
> +
> +#define QSERDES_V6_TX_RES_CODE_LANE_TX 0x34
> +#define QSERDES_V6_TX_RES_CODE_LANE_RX 0x38
> +#define QSERDES_V6_TX_RES_CODE_LANE_OFFSET_TX 0x3c
> +#define QSERDES_V6_TX_RES_CODE_LANE_OFFSET_RX 0x40
> +#define QSERDES_V6_TX_BIST_PATTERN7 0x7c
> +#define QSERDES_V6_TX_LANE_MODE_1 0x84
> +#define QSERDES_V6_TX_LANE_MODE_3 0x8c
> +#define QSERDES_V6_TX_LANE_MODE_4 0x90
> +#define QSERDES_V6_TX_LANE_MODE_5 0x94
> +#define QSERDES_V6_TX_RCV_DETECT_LVL_2 0xa4
> +#define QSERDES_V6_TX_PI_QEC_CTRL 0xe4
> +
> +#define QSERDES_V6_RX_UCDR_FO_GAIN 0x08
> +#define QSERDES_V6_RX_UCDR_SO_GAIN 0x14
> +#define QSERDES_V6_RX_UCDR_FASTLOCK_FO_GAIN 0x30
> +#define QSERDES_V6_RX_UCDR_SO_SATURATION_AND_ENABLE 0x34
> +#define QSERDES_V6_RX_UCDR_FASTLOCK_COUNT_LOW 0x3c
> +#define QSERDES_V6_RX_UCDR_FASTLOCK_COUNT_HIGH 0x40
> +#define QSERDES_V6_RX_UCDR_PI_CONTROLS 0x44
> +#define QSERDES_V6_RX_UCDR_SB2_THRESH1 0x4c
> +#define QSERDES_V6_RX_UCDR_SB2_THRESH2 0x50
> +#define QSERDES_V6_RX_UCDR_SB2_GAIN1 0x54
> +#define QSERDES_V6_RX_UCDR_SB2_GAIN2 0x58
> +#define QSERDES_V6_RX_AUX_DATA_TCOARSE_TFINE 0x60
> +#define QSERDES_V6_RX_TX_ADAPT_POST_THRESH 0xcc
> +#define QSERDES_V6_RX_VGA_CAL_CNTRL1 0xd4
> +#define QSERDES_V6_RX_VGA_CAL_CNTRL2 0xd8
> +#define QSERDES_V6_RX_GM_CAL 0xdc
> +#define QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL2 0xec
> +#define QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL3 0xf0
> +#define QSERDES_V6_RX_RX_EQU_ADAPTOR_CNTRL4 0xf4
> +#define QSERDES_V6_RX_RX_IDAC_TSETTLE_LOW 0xf8
> +#define QSERDES_V6_RX_RX_IDAC_TSETTLE_HIGH 0xfc
> +#define QSERDES_V6_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x110
> +#define QSERDES_V6_RX_SIDGET_ENABLES 0x118
> +#define QSERDES_V6_RX_SIGDET_CNTRL 0x11c
> +#define QSERDES_V6_RX_SIGDET_DEGLITCH_CNTRL 0x124
> +#define QSERDES_V6_RX_RX_MODE_00_LOW 0x15c
> +#define QSERDES_V6_RX_RX_MODE_00_HIGH 0x160
> +#define QSERDES_V6_RX_RX_MODE_00_HIGH2 0x164
> +#define QSERDES_V6_RX_RX_MODE_00_HIGH3 0x168
> +#define QSERDES_V6_RX_RX_MODE_00_HIGH4 0x16c
> +#define QSERDES_V6_RX_RX_MODE_01_LOW 0x170
> +#define QSERDES_V6_RX_RX_MODE_01_HIGH 0x174
> +#define QSERDES_V6_RX_RX_MODE_01_HIGH2 0x178
> +#define QSERDES_V6_RX_RX_MODE_01_HIGH3 0x17c
> +#define QSERDES_V6_RX_RX_MODE_01_HIGH4 0x180
> +#define QSERDES_V6_RX_RX_MODE_10_LOW 0x184
> +#define QSERDES_V6_RX_RX_MODE_10_HIGH 0x188
> +#define QSERDES_V6_RX_RX_MODE_10_HIGH2 0x18c
> +#define QSERDES_V6_RX_RX_MODE_10_HIGH3 0x190
> +#define QSERDES_V6_RX_RX_MODE_10_HIGH4 0x194
> +#define QSERDES_V6_RX_DFE_EN_TIMER 0x1a0
> +#define QSERDES_V6_RX_DFE_CTLE_POST_CAL_OFFSET 0x1a4
> +#define QSERDES_V6_RX_DCC_CTRL1 0x1a8
> +#define QSERDES_V6_RX_VTH_CODE 0x1b0
> +#define QSERDES_V6_RX_SIGDET_CAL_CTRL1 0x1e4
> +#define QSERDES_V6_RX_SIGDET_CAL_TRIM 0x1f8
> +
> +#endif
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
> new file mode 100644
> index 000000000000..6009b088882f
> --- /dev/null
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
> @@ -0,0 +1,45 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2022, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef QCOM_PHY_QMP_QSERDES_TXRX_PCIE_V6_20_H_
> +#define QCOM_PHY_QMP_QSERDES_TXRX_PCIE_V6_20_H_
> +
> +#define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_TX 0x30
> +#define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_RX 0x34
> +#define QSERDES_V6_20_TX_TRAN_DRVR_EMP_EN 0xac
> +#define QSERDES_V6_20_TX_LANE_MODE_1 0x78
> +#define QSERDES_V6_20_TX_LANE_MODE_2 0x7c
> +#define QSERDES_V6_20_TX_LANE_MODE_3 0x80
> +
> +#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_2 0x08
> +#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_3 0x0c
> +#define QSERDES_V6_20_RX_UCDR_PI_CONTROLS 0x20
> +#define QSERDES_V6_20_RX_UCDR_SO_ACC_DEFAULT_VAL_RATE3 0x34
> +#define QSERDES_V6_20_RX_IVCM_CAL_CTRL2 0x9c
> +#define QSERDES_V6_20_RX_IVCM_POSTCAL_OFFSET 0xa0
> +#define QSERDES_V6_20_RX_DFE_3 0xb4
> +#define QSERDES_V6_20_RX_VGA_CAL_MAN_VAL 0xe8
> +#define QSERDES_V6_20_RX_GM_CAL 0x10c
> +#define QSERDES_V6_20_RX_EQU_ADAPTOR_CNTRL4 0x120
> +#define QSERDES_V6_20_RX_SIGDET_ENABLES 0x148
> +#define QSERDES_V6_20_RX_PHPRE_CTRL 0x188
> +#define QSERDES_V6_20_RX_DFE_CTLE_POST_CAL_OFFSET 0x194
> +#define QSERDES_V6_20_RX_Q_PI_INTRINSIC_BIAS_RATE32 0x1dc
> +#define QSERDES_V6_20_RX_MODE_RATE2_B0 0x1f4
> +#define QSERDES_V6_20_RX_MODE_RATE2_B1 0x1f8
> +#define QSERDES_V6_20_RX_MODE_RATE2_B2 0x1fc
> +#define QSERDES_V6_20_RX_MODE_RATE2_B3 0x200
> +#define QSERDES_V6_20_RX_MODE_RATE2_B4 0x204
> +#define QSERDES_V6_20_RX_MODE_RATE2_B5 0x208
> +#define QSERDES_V6_20_RX_MODE_RATE2_B6 0x20c
> +#define QSERDES_V6_20_RX_MODE_RATE3_B0 0x210
> +#define QSERDES_V6_20_RX_MODE_RATE3_B1 0x214
> +#define QSERDES_V6_20_RX_MODE_RATE3_B2 0x218
> +#define QSERDES_V6_20_RX_MODE_RATE3_B3 0x21c
> +#define QSERDES_V6_20_RX_MODE_RATE3_B4 0x220
> +#define QSERDES_V6_20_RX_MODE_RATE3_B5 0x224
> +#define QSERDES_V6_20_RX_MODE_RATE3_B6 0x228
> +
> +#endif
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
> index 29a48f0436d2..91a908c384d1 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.h
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
> @@ -21,6 +21,12 @@
> #include "phy-qcom-qmp-qserdes-txrx-v5_20.h"
> #include "phy-qcom-qmp-qserdes-txrx-v5_5nm.h"
>
> +#include "phy-qcom-qmp-qserdes-com-v6.h"
> +#include "phy-qcom-qmp-qserdes-ln-shrd-v6.h"
> +#include "phy-qcom-qmp-qserdes-txrx-v6.h"
> +#include "phy-qcom-qmp-qserdes-txrx-v6_20.h"
> +#include "phy-qcom-qmp-qserdes-txrx-ufs-v6.h"
> +
> #include "phy-qcom-qmp-qserdes-pll.h"
>
> #include "phy-qcom-qmp-pcs-v2.h"
> @@ -45,6 +51,13 @@
>
> #include "phy-qcom-qmp-pcs-pcie-v5_20.h"
>
> +#include "phy-qcom-qmp-pcs-v6.h"
> +#include "phy-qcom-qmp-pcs-v6_20.h"
> +#include "phy-qcom-qmp-pcs-pcie-v6.h"
> +#include "phy-qcom-qmp-pcs-pcie-v6_20.h"
> +#include "phy-qcom-qmp-pcs-ufs-v6.h"
> +#include "phy-qcom-qmp-pcs-usb-v6.h"
> +
> #include "phy-qcom-qmp-pcie-qhp.h"
>
> /* Only for QMP V3 & V4 PHY - DP COM registers */
> --
> 2.34.1
--
~Vinod
More information about the linux-phy
mailing list