[PATCH v6 06/11] arm64: dts: mt7986: add spi related device nodes
Frank Wunderlich
linux at fw-web.de
Fri Nov 18 11:01:21 PST 2022
From: Sam Shih <sam.shih at mediatek.com>
This patch adds spi support for MT7986.
Signed-off-by: Sam Shih <sam.shih at mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
---
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 35 ++++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 28 ++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 35 ++++++++++++++++++++
3 files changed, 98 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 2f48cc3d3ddb..006878e3f2b2 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -59,6 +59,20 @@ switch: switch at 0 {
};
&pio {
+ spi_flash_pins: spi-flash-pins {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+ };
+
+ spic_pins: spic-pins {
+ mux {
+ function = "spi";
+ groups = "spi1_2";
+ };
+ };
+
uart1_pins: uart1-pins {
mux {
function = "uart";
@@ -105,6 +119,27 @@ conf {
};
};
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_flash_pins>;
+ cs-gpios = <0>, <0>;
+ status = "okay";
+ spi_nand: spi_nand at 0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ spi-tx-buswidth = <4>;
+ spi-rx-buswidth = <4>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spic_pins>;
+ cs-gpios = <0>, <0>;
+ status = "okay";
+};
+
&switch {
ports {
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index afc01abfa99c..29da9b8ed753 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -253,6 +253,34 @@ i2c0: i2c at 11008000 {
status = "disabled";
};
+ spi0: spi at 1100a000 {
+ compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x1100a000 0 0x100>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topckgen CLK_TOP_MPLL_D2>,
+ <&topckgen CLK_TOP_SPI_SEL>,
+ <&infracfg CLK_INFRA_SPI0_CK>,
+ <&infracfg CLK_INFRA_SPI0_HCK_CK>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+ status = "disabled";
+ };
+
+ spi1: spi at 1100b000 {
+ compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0x1100b000 0 0x100>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topckgen CLK_TOP_MPLL_D2>,
+ <&topckgen CLK_TOP_SPIM_MST_SEL>,
+ <&infracfg CLK_INFRA_SPI1_CK>,
+ <&infracfg CLK_INFRA_SPI1_HCK_CK>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
+ status = "disabled";
+ };
+
ethsys: syscon at 15000000 {
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
index 79c5c78f7a14..2c7f1d4fb352 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -100,6 +100,20 @@ fixed-link {
};
&pio {
+ spi_flash_pins: spi-flash-pins {
+ mux {
+ function = "spi";
+ groups = "spi0", "spi0_wp_hold";
+ };
+ };
+
+ spic_pins: spic-pins {
+ mux {
+ function = "spi";
+ groups = "spi1_2";
+ };
+ };
+
wf_2g_5g_pins: wf-2g-5g-pins {
mux {
function = "wifi";
@@ -132,6 +146,27 @@ conf {
};
};
+&spi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_flash_pins>;
+ cs-gpios = <0>, <0>;
+ status = "okay";
+ spi_nand: spi_nand at 0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ spi-tx-buswidth = <4>;
+ spi-rx-buswidth = <4>;
+ };
+};
+
+&spi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spic_pins>;
+ cs-gpios = <0>, <0>;
+ status = "okay";
+};
+
&uart0 {
status = "okay";
};
--
2.34.1
More information about the linux-phy
mailing list