[PATCH V4 2/6] arm64: tegra: Enable XUSB host function on Jetson AGX Orin

Jon Hunter jonathanh at nvidia.com
Fri Nov 18 07:40:02 PST 2022


From: Wayne Chang <waynec at nvidia.com>

This commit enables XUSB host and pad controller on Jetson AGX Orin.

Signed-off-by: Wayne Chang <waynec at nvidia.com>
Signed-off-by: Thierry Reding <treding at nvidia.com>
Signed-off-by: Jon Hunter <jonathanh at nvidia.com>
---
This patch is dependent on the following change:
https://lore.kernel.org/all/20221003125141.123759-1-jonathanh@nvidia.com/

V3 -> V4: dropped support for the USB device and type-c connector
V2 -> V3: nothing has changed but added the dependency here
V1 -> V2: removed the redundant cells and status in ucsi-ccg.

 .../boot/dts/nvidia/tegra234-p3701-0000.dtsi  |  48 ++++++
 .../nvidia/tegra234-p3737-0000+p3701-0000.dts |  93 +++++++++++
 arch/arm64/boot/dts/nvidia/tegra234.dtsi      | 145 ++++++++++++++++++
 3 files changed, 286 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
index fe52810e5b9d..6f241d0d87e4 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3701-0000.dtsi
@@ -68,6 +68,29 @@ mmc at 3460000 {
 			non-removable;
 		};
 
+		padctl at 3520000 {
+			vclamp-usb-supply = <&vdd_ao_1v8>;
+			avdd-usb-supply = <&vdd_ao_3v3>;
+
+			ports {
+				usb2-0 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-1 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-2 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+
+				usb2-3 {
+					vbus-supply = <&vdd_5v0_sys>;
+				};
+			};
+		};
+
 		rtc at c2a0000 {
 			status = "okay";
 		};
@@ -76,4 +99,29 @@ pmc at c360000 {
 			nvidia,invert-interrupt;
 		};
 	};
+
+	vdd_5v0_sys: regulator-vdd-5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "VIN_SYS_5V0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_ao_1v8: regulator-vdd-1v8-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-AO-1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_ao_3v3: regulator-vdd-3v3-ao {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-AO-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 };
diff --git a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
index 96aa2267b06d..32c58aa00035 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra234-p3737-0000+p3701-0000.dts
@@ -2022,6 +2022,99 @@ hda at 3510000 {
 			nvidia,model = "NVIDIA Jetson AGX Orin HDA";
 			status = "okay";
 		};
+
+		padctl at 3520000 {
+			status = "okay";
+
+			pads {
+				usb2 {
+					lanes {
+						usb2-0 {
+							status = "okay";
+						};
+
+						usb2-1 {
+							status = "okay";
+						};
+
+						usb2-2 {
+							status = "okay";
+						};
+
+						usb2-3 {
+							status = "okay";
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							status = "okay";
+						};
+
+						usb3-1 {
+							status = "okay";
+						};
+
+						usb3-2 {
+							status = "okay";
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-0 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb2-1 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb2-2 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb2-3 {
+					mode = "host";
+					status = "okay";
+				};
+
+				usb3-0 {
+					nvidia,usb2-companion = <1>;
+					status = "okay";
+				};
+
+				usb3-1 {
+					nvidia,usb2-companion = <0>;
+					status = "okay";
+				};
+
+				usb3-2 {
+					nvidia,usb2-companion = <3>;
+					status = "okay";
+				};
+			};
+		};
+
+		usb at 3610000 {
+			status = "okay";
+
+			phys =	<&{/bus at 0/padctl at 3520000/pads/usb2/lanes/usb2-0}>,
+				<&{/bus at 0/padctl at 3520000/pads/usb2/lanes/usb2-1}>,
+				<&{/bus at 0/padctl at 3520000/pads/usb2/lanes/usb2-2}>,
+				<&{/bus at 0/padctl at 3520000/pads/usb2/lanes/usb2-3}>,
+				<&{/bus at 0/padctl at 3520000/pads/usb3/lanes/usb3-0}>,
+				<&{/bus at 0/padctl at 3520000/pads/usb3/lanes/usb3-1}>,
+				<&{/bus at 0/padctl at 3520000/pads/usb3/lanes/usb3-2}>;
+			phy-names = "usb2-0", "usb2-1", "usb2-2", "usb2-3",
+				"usb3-0", "usb3-1", "usb3-2";
+		};
 	};
 
 	chosen {
diff --git a/arch/arm64/boot/dts/nvidia/tegra234.dtsi b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
index 6d023c65912f..8514a38c2996 100644
--- a/arch/arm64/boot/dts/nvidia/tegra234.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra234.dtsi
@@ -1079,6 +1079,151 @@ hda at 3510000 {
 			status = "disabled";
 		};
 
+		xusb_padctl: padctl at 3520000 {
+			compatible = "nvidia,tegra234-xusb-padctl";
+			reg = <0x03520000 0x20000>,
+			      <0x03540000 0x10000>;
+			reg-names = "padctl", "ao";
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
+
+			resets = <&bpmp TEGRA234_RESET_XUSB_PADCTL>;
+			reset-names = "padctl";
+
+			status = "disabled";
+
+			pads {
+				usb2 {
+					clocks = <&bpmp TEGRA234_CLK_USB2_TRK>;
+					clock-names = "trk";
+
+					lanes {
+						usb2-0 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-1 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-2 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb2-3 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+					};
+				};
+
+				usb3 {
+					lanes {
+						usb3-0 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-1 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-2 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+
+						usb3-3 {
+							nvidia,function = "xusb";
+							status = "disabled";
+							#phy-cells = <0>;
+						};
+					};
+				};
+			};
+
+			ports {
+				usb2-0 {
+					status = "disabled";
+				};
+
+				usb2-1 {
+					status = "disabled";
+				};
+
+				usb2-2 {
+					status = "disabled";
+				};
+
+				usb2-3 {
+					status = "disabled";
+				};
+
+				usb3-0 {
+					status = "disabled";
+				};
+
+				usb3-1 {
+					status = "disabled";
+				};
+
+				usb3-2 {
+					status = "disabled";
+				};
+
+				usb3-3 {
+					status = "disabled";
+				};
+			};
+		};
+
+		usb at 3610000 {
+			compatible = "nvidia,tegra234-xusb";
+			reg = <0x03610000 0x40000>,
+			      <0x03600000 0x10000>,
+			      <0x03650000 0x10000>;
+			reg-names = "hcd", "fpci", "bar2";
+
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&bpmp TEGRA234_CLK_XUSB_CORE_HOST>,
+				 <&bpmp TEGRA234_CLK_XUSB_FALCON>,
+				 <&bpmp TEGRA234_CLK_XUSB_CORE_SS>,
+				 <&bpmp TEGRA234_CLK_XUSB_SS>,
+				 <&bpmp TEGRA234_CLK_CLK_M>,
+				 <&bpmp TEGRA234_CLK_XUSB_FS>,
+				 <&bpmp TEGRA234_CLK_UTMIP_PLL>,
+				 <&bpmp TEGRA234_CLK_CLK_M>,
+				 <&bpmp TEGRA234_CLK_PLLE>;
+			clock-names = "xusb_host", "xusb_falcon_src",
+				      "xusb_ss", "xusb_ss_src", "xusb_hs_src",
+				      "xusb_fs_src", "pll_u_480m", "clk_m",
+				      "pll_e";
+			interconnects = <&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTR &emc>,
+					<&mc TEGRA234_MEMORY_CLIENT_XUSB_HOSTW &emc>;
+			interconnect-names = "dma-mem", "write";
+			iommus = <&smmu_niso1 TEGRA234_SID_XUSB_HOST>;
+
+			power-domains = <&bpmp TEGRA234_POWER_DOMAIN_XUSBC>,
+					<&bpmp TEGRA234_POWER_DOMAIN_XUSBA>;
+			power-domain-names = "xusb_host", "xusb_ss";
+
+			nvidia,xusb-padctl = <&xusb_padctl>;
+			dma-coherent;
+			status = "disabled";
+		};
+
 		fuse at 3810000 {
 			compatible = "nvidia,tegra234-efuse";
 			reg = <0x03810000 0x10000>;
-- 
2.25.1




More information about the linux-phy mailing list