[PATCH 07/12] dt-bindings: power: remove deprecated amlogic,meson-gx-pwrc.txt bindings

[Neil Armstrong]

Remove the deprecated amlogic,meson-gx-pwrc.txt bindings, which was
replaced by the amlogic,meson-ee-pwrc.yaml bindings.

The amlogic,meson-gx-pwrc-vpu compatible isn't used anymore since [1]
was merged in v5.8-rc1 and amlogic,meson-g12a-pwrc-vpu either since [2]
was merged in v5.3-rc1.

[1] commit 5273d6cacc06 ("arm64: dts: meson-gx: Switch to the meson-ee-pwrc bindings")
[2] commit f4f1c8d9ace7 ("arm64: dts: meson-g12: add Everything-Else power domain controller")

Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
 .../bindings/power/amlogic,meson-gx-pwrc.txt       | 63 ----------------------
 1 file changed, 63 deletions(-)

diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
deleted file mode 100644
index 99b5b10cda31..000000000000
--- a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Amlogic Meson Power Controller
-==============================
-
-The Amlogic Meson SoCs embeds an internal Power domain controller.
-
-VPU Power Domain
-----------------
-
-The Video Processing Unit power domain is controlled by this power controller,
-but the domain requires some external resources to meet the correct power
-sequences.
-The bindings must respect the power domain bindings as described in the file
-power-domain.yaml
-
-Device Tree Bindings:
----------------------
-
-Required properties:
-- compatible: should be one of the following :
-	- "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs
-	- "amlogic,meson-g12a-pwrc-vpu" for the Meson G12A SoCs
-- #power-domain-cells: should be 0
-- amlogic,hhi-sysctrl: phandle to the HHI sysctrl node
-- resets: phandles to the reset lines needed for this power demain sequence
-	as described in ../reset/reset.txt
-- clocks: from common clock binding: handle to VPU and VAPB clocks
-- clock-names: from common clock binding: must contain "vpu", "vapb"
-	corresponding to entry in the clocks property.
-
-Parent node should have the following properties :
-- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"
-- reg: base address and size of the AO system control register space.
-
-Example:
--------
-
-ao_sysctrl: sys-ctrl at 0 {
-	compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
-	reg =  <0x0 0x0 0x0 0x100>;
-
-	pwrc_vpu: power-controller-vpu {
-		compatible = "amlogic,meson-gx-pwrc-vpu";
-		#power-domain-cells = <0>;
-		amlogic,hhi-sysctrl = <&sysctrl>;
-		resets = <&reset RESET_VIU>,
-			 <&reset RESET_VENC>,
-			 <&reset RESET_VCBUS>,
-			 <&reset RESET_BT656>,
-			 <&reset RESET_DVIN_RESET>,
-			 <&reset RESET_RDMA>,
-			 <&reset RESET_VENCI>,
-			 <&reset RESET_VENCP>,
-			 <&reset RESET_VDAC>,
-			 <&reset RESET_VDI6>,
-			 <&reset RESET_VENCL>,
-			 <&reset RESET_VID_LOCK>;
-		clocks = <&clkc CLKID_VPU>,
-			 <&clkc CLKID_VAPB>;
-		clock-names = "vpu", "vapb";
-	};
-};
-
-

-- 
b4 0.10.1