[PATCH 03/12] dt-bindings: nvmem: convert amlogic-meson-mx-efuse.txt to dt-schema
Neil Armstrong
neil.armstrong at linaro.org
Fri Nov 18 06:33:29 PST 2022
Convert the Amlogic Meson6 eFuse bindings to dt-schema.
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
.../bindings/nvmem/amlogic,meson6-efuse.yaml | 64 ++++++++++++++++++++++
.../bindings/nvmem/amlogic-meson-mx-efuse.txt | 22 --------
2 files changed, 64 insertions(+), 22 deletions(-)
diff --git a/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml b/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml
new file mode 100644
index 000000000000..232d68d7fbcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/amlogic,meson6-efuse.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/amlogic,meson6-efuse.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson6 eFuse
+
+maintainers:
+ - Neil Armstrong <neil.armstrong at linaro.org>
+ - Martin Blumenstingl <martin.blumenstingl at googlemail.com>
+
+allOf:
+ - $ref: nvmem.yaml#
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson6-efuse
+ - amlogic,meson8-efuse
+ - amlogic,meson8b-efuse
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: core
+
+ secure-monitor:
+ description: phandle to the secure-monitor node
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ efuse: efuse at 0 {
+ compatible = "amlogic,meson6-efuse";
+ reg = <0x0 0x2000>;
+ clocks = <&clk_efuse>;
+ clock-names = "core";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sn: sn at 14 {
+ reg = <0x14 0x10>;
+ };
+
+ eth_mac: mac at 34 {
+ reg = <0x34 0x10>;
+ };
+
+ bid: bid at 46 {
+ reg = <0x46 0x30>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt
deleted file mode 100644
index a3c63954a1a4..000000000000
--- a/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt
+++ /dev/null
@@ -1,22 +0,0 @@
-Amlogic Meson6/Meson8/Meson8b efuse
-
-Required Properties:
-- compatible: depending on the SoC this should be one of:
- - "amlogic,meson6-efuse"
- - "amlogic,meson8-efuse"
- - "amlogic,meson8b-efuse"
-- reg: base address and size of the efuse registers
-- clocks: a reference to the efuse core gate clock
-- clock-names: must be "core"
-
-All properties and sub-nodes as well as the consumer bindings
-defined in nvmem.txt in this directory are also supported.
-
-
-Example:
- efuse: nvmem at 0 {
- compatible = "amlogic,meson8-efuse";
- reg = <0x0 0x2000>;
- clocks = <&clkc CLKID_EFUSE>;
- clock-names = "core";
- };
--
b4 0.10.1
More information about the linux-phy
mailing list