[PATCH v2 14/22] phy: qcom-qmp-combo: clean up DP configurations
Johan Hovold
johan+linaro at kernel.org
Mon Nov 14 03:06:13 PST 2022
In preparation for merging the USB and DP configurations, align the
initialisations of the DP function pointers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Signed-off-by: Johan Hovold <johan+linaro at kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 40 +++++++++++------------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 43193bfe6e11..50c011d23a9e 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1049,10 +1049,10 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
@@ -1106,10 +1106,10 @@ static const struct qmp_phy_cfg sdm845_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v3_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sdm845_usb3dpphy_cfg = {
@@ -1166,10 +1166,10 @@ static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
@@ -1222,10 +1222,10 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v5_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v5_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v5_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v5_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sc8280xp_usb43dpphy_combo_cfg = {
@@ -1282,10 +1282,10 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
.swing_hbr3_hbr2 = &qmp_dp_v3_voltage_swing_hbr3_hbr2,
.pre_emphasis_hbr3_hbr2 = &qmp_dp_v3_pre_emphasis_hbr3_hbr2,
- .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
- .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
- .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
- .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+ .dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+ .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+ .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+ .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
};
static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
--
2.37.4
More information about the linux-phy
mailing list