[PATCH 08/22] phy: qcom-qmp-combo: separate USB and DP init ops
Johan Hovold
johan+linaro at kernel.org
Fri Nov 11 00:56:29 PST 2022
Separate the USB and DP init and exit operations by calling the common
initialisation code directly from the USB operation and adding a "dp"
infix to the DP callbacks.
Signed-off-by: Johan Hovold <johan+linaro at kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 36 ++++++++++++-----------
1 file changed, 19 insertions(+), 17 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index ae04f6219fd2..5d985195df38 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1964,7 +1964,7 @@ static int qmp_combo_com_exit(struct qmp_phy *qphy)
return 0;
}
-static int qmp_combo_init(struct phy *phy)
+static int qmp_combo_dp_init(struct phy *phy)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
const struct qmp_phy_cfg *cfg = qphy->cfg;
@@ -1974,8 +1974,16 @@ static int qmp_combo_init(struct phy *phy)
if (ret)
return ret;
- if (cfg->type == PHY_TYPE_DP)
- cfg->dp_aux_init(qphy);
+ cfg->dp_aux_init(qphy);
+
+ return 0;
+}
+
+static int qmp_combo_dp_exit(struct phy *phy)
+{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
+
+ qmp_combo_com_exit(qphy);
return 0;
}
@@ -2073,38 +2081,32 @@ static int qmp_combo_power_off(struct phy *phy)
return 0;
}
-static int qmp_combo_exit(struct phy *phy)
-{
- struct qmp_phy *qphy = phy_get_drvdata(phy);
-
- qmp_combo_com_exit(qphy);
-
- return 0;
-}
-
static int qmp_combo_usb_init(struct phy *phy)
{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
int ret;
- ret = qmp_combo_init(phy);
+ ret = qmp_combo_com_init(qphy);
if (ret)
return ret;
ret = qmp_combo_power_on(phy);
if (ret)
- qmp_combo_exit(phy);
+ qmp_combo_com_exit(qphy);
return ret;
}
static int qmp_combo_usb_exit(struct phy *phy)
{
+ struct qmp_phy *qphy = phy_get_drvdata(phy);
int ret;
ret = qmp_combo_power_off(phy);
if (ret)
return ret;
- return qmp_combo_exit(phy);
+
+ return qmp_combo_com_exit(qphy);
}
static int qmp_combo_usb_set_mode(struct phy *phy, enum phy_mode mode, int submode)
@@ -2124,12 +2126,12 @@ static const struct phy_ops qmp_combo_usb_phy_ops = {
};
static const struct phy_ops qmp_combo_dp_phy_ops = {
- .init = qmp_combo_init,
+ .init = qmp_combo_dp_init,
.configure = qcom_qmp_dp_phy_configure,
.power_on = qmp_combo_power_on,
.calibrate = qcom_qmp_dp_phy_calibrate,
.power_off = qmp_combo_power_off,
- .exit = qmp_combo_exit,
+ .exit = qmp_combo_dp_exit,
.owner = THIS_MODULE,
};
--
2.37.4
More information about the linux-phy
mailing list