[PATCH v3 12/13] phy: qcom-qmp-usb: fix regs layout arrays

[Dmitry Baryshkov]

Drop qcm2290_usb3phy_regs_layout, it is a duplicate of
qmp_v3_usb3phy_regs_layout. Introduce qmp_v5_usb3phy_regs_layout to be
used for sm8350 and sc8280xp.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index aa6db5b679c0..74c04cb497f8 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -127,13 +127,15 @@ static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
 };
 
-static const unsigned int qcm2290_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_SW_RESET]			= QPHY_V3_PCS_SW_RESET,
-	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V3_PCS_POWER_DOWN_CONTROL,
-	[QPHY_START_CTRL]		= QPHY_V3_PCS_START_CONTROL,
-	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= QPHY_V3_PCS_AUTONOMOUS_MODE_CTRL,
-	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V3_PCS_LFPS_RXTERM_IRQ_CLEAR,
-	[QPHY_PCS_STATUS]		= QPHY_V3_PCS_PCS_STATUS,
+static const unsigned int qmp_v5_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
+	[QPHY_SW_RESET]			= QPHY_V5_PCS_SW_RESET,
+	[QPHY_START_CTRL]		= QPHY_V5_PCS_START_CONTROL,
+	[QPHY_PCS_STATUS]		= QPHY_V5_PCS_PCS_STATUS1,
+	[QPHY_PCS_POWER_DOWN_CONTROL]	= QPHY_V5_PCS_POWER_DOWN_CONTROL,
+
+	/* In PCS_USB */
+	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL,
+	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
 };
 
 static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
@@ -1662,7 +1664,7 @@ static const struct qmp_phy_cfg sc8280xp_usb3_uniphy_cfg = {
 	.num_resets		= ARRAY_SIZE(qcm2290_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
-	.regs			= qmp_v4_usb3phy_regs_layout,
+	.regs			= qmp_v5_usb3phy_regs_layout,
 };
 
 static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = {
@@ -1878,7 +1880,7 @@ static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
-	.regs			= qmp_v4_usb3phy_regs_layout,
+	.regs			= qmp_v5_usb3phy_regs_layout,
 	.pcs_usb_offset		= 0x300,
 
 	.has_pwrdn_delay	= true,
@@ -1904,7 +1906,7 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
-	.regs			= qmp_v4_usb3phy_regs_layout,
+	.regs			= qmp_v5_usb3phy_regs_layout,
 	.pcs_usb_offset		= 0x1000,
 
 	.has_pwrdn_delay	= true,
@@ -1927,7 +1929,7 @@ static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
 	.num_resets		= ARRAY_SIZE(qcm2290_usb3phy_reset_l),
 	.vreg_list		= qmp_phy_vreg_l,
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
-	.regs			= qcm2290_usb3phy_regs_layout,
+	.regs			= qmp_v3_usb3phy_regs_layout,
 };
 
 static void qmp_usb_configure_lane(void __iomem *base,
-- 
2.35.1