[PATCH v3 03/13] phy: qcom-qmp-pcie: rework regs layout arrays
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Nov 10 11:22:38 PST 2022
Use symbolic names for the values inside reg layout arrays.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 32 +++++++++++-----------
drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h | 4 +++
2 files changed, 20 insertions(+), 16 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 8fa66458c259..7de0ac23ff0b 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -77,24 +77,24 @@ enum qphy_reg_layout {
};
static const unsigned int ipq_pciephy_gen3_regs_layout[QPHY_LAYOUT_SIZE] = {
- [QPHY_SW_RESET] = 0x00,
- [QPHY_START_CTRL] = 0x44,
- [QPHY_PCS_STATUS] = 0x14,
- [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_SW_RESET] = QPHY_V4_PCS_SW_RESET,
+ [QPHY_START_CTRL] = QPHY_V4_PCS_START_CONTROL,
+ [QPHY_PCS_STATUS] = QPHY_V4_PCS_PCS_STATUS1,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V4_PCS_POWER_DOWN_CONTROL,
};
static const unsigned int pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
- [QPHY_SW_RESET] = 0x00,
- [QPHY_START_CTRL] = 0x08,
- [QPHY_PCS_STATUS] = 0x174,
- [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04,
+ [QPHY_SW_RESET] = QPHY_V2_PCS_SW_RESET,
+ [QPHY_START_CTRL] = QPHY_V2_PCS_START_CONTROL,
+ [QPHY_PCS_STATUS] = QPHY_V2_PCS_PCI_PCS_STATUS,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V2_PCS_POWER_DOWN_CONTROL,
};
static const unsigned int sdm845_qmp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
- [QPHY_SW_RESET] = 0x00,
- [QPHY_START_CTRL] = 0x08,
- [QPHY_PCS_STATUS] = 0x174,
- [QPHY_PCS_POWER_DOWN_CONTROL] = 0x04,
+ [QPHY_SW_RESET] = QPHY_V3_PCS_SW_RESET,
+ [QPHY_START_CTRL] = QPHY_V3_PCS_START_CONTROL,
+ [QPHY_PCS_STATUS] = QPHY_V3_PCS_PCS_STATUS,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V3_PCS_POWER_DOWN_CONTROL,
};
static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
@@ -105,10 +105,10 @@ static const unsigned int sdm845_qhp_pciephy_regs_layout[QPHY_LAYOUT_SIZE] = {
};
static const unsigned int sm8250_pcie_regs_layout[QPHY_LAYOUT_SIZE] = {
- [QPHY_SW_RESET] = 0x00,
- [QPHY_START_CTRL] = 0x44,
- [QPHY_PCS_STATUS] = 0x14,
- [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_SW_RESET] = QPHY_V4_PCS_SW_RESET,
+ [QPHY_START_CTRL] = QPHY_V4_PCS_START_CONTROL,
+ [QPHY_PCS_STATUS] = QPHY_V4_PCS_PCS_STATUS1,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V4_PCS_POWER_DOWN_CONTROL,
};
static const struct qmp_phy_init_tbl msm8998_pcie_serdes_tbl[] = {
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h
index c8515f506872..2624a1ec3e73 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v2.h
@@ -7,7 +7,9 @@
#define QCOM_PHY_QMP_PCS_V2_H_
/* Only for QMP V2 PHY - PCS registers */
+#define QPHY_V2_PCS_SW_RESET 0x000
#define QPHY_V2_PCS_POWER_DOWN_CONTROL 0x004
+#define QPHY_V2_PCS_START_CONTROL 0x008
#define QPHY_V2_PCS_TXDEEMPH_M6DB_V0 0x024
#define QPHY_V2_PCS_TXDEEMPH_M3P5DB_V0 0x028
#define QPHY_V2_PCS_TX_LARGE_AMP_DRV_LVL 0x034
@@ -43,4 +45,6 @@
#define QPHY_V2_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_LSB 0x1dc
#define QPHY_V2_PCS_L1SS_WAKEUP_DLY_TIME_AUXCLK_MSB 0x1e0
+#define QPHY_V2_PCS_PCI_PCS_STATUS 0x174 /* PCI */
+
#endif
--
2.35.1
More information about the linux-phy
mailing list