[PATCH v1 1/7] dt-bindings: PCI: qcom: Add sm8350 to bindings

[Rob Herring]

On Mon, Oct 31, 2022 at 4:47 PM Dmitry Baryshkov
<dmitry.baryshkov at linaro.org> wrote:
>
> On Tue, 1 Nov 2022 at 00:40, Rob Herring <robh at kernel.org> wrote:
> >
> > On Sun, Oct 30, 2022 at 12:13:06AM +0300, Dmitry Baryshkov wrote:
> > > Add bindings for two PCIe hosts on SM8350 platform. The only difference
> > > between them is in the aggre0 clock, which warrants the oneOf clause for
> > > the clocks properties.
> > >
> > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> > > ---
> > >  .../devicetree/bindings/pci/qcom,pcie.yaml    | 54 +++++++++++++++++++
> > >  1 file changed, 54 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> > > index 54f07852d279..55bf5958ef79 100644
> > > --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> > > +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
> > > @@ -32,6 +32,7 @@ properties:
> > >        - qcom,pcie-sdm845
> > >        - qcom,pcie-sm8150
> > >        - qcom,pcie-sm8250
> > > +      - qcom,pcie-sm8350
> > >        - qcom,pcie-sm8450-pcie0
> > >        - qcom,pcie-sm8450-pcie1
> > >        - qcom,pcie-ipq6018
> > > @@ -185,6 +186,7 @@ allOf:
> > >                - qcom,pcie-sc8180x
> > >                - qcom,pcie-sc8280xp
> > >                - qcom,pcie-sm8250
> > > +              - qcom,pcie-sm8350
> > >                - qcom,pcie-sm8450-pcie0
> > >                - qcom,pcie-sm8450-pcie1
> > >      then:
> > > @@ -540,6 +542,57 @@ allOf:
> > >            items:
> > >              - const: pci # PCIe core reset
> > >
> > > +  - if:
> > > +      properties:
> > > +        compatible:
> > > +          contains:
> > > +            enum:
> > > +              - qcom,pcie-sm8350
> > > +    then:
> > > +      oneOf:
> > > +          # Unfortunately the "optional" ref clock is used in the middle of the list
> > > +        - properties:
> > > +            clocks:
> > > +              maxItems: 13
> > > +            clock-names:
> > > +              items:
> > > +                - const: pipe # PIPE clock
> > > +                - const: pipe_mux # PIPE MUX
> > > +                - const: phy_pipe # PIPE output clock
> > > +                - const: ref # REFERENCE clock
> > > +                - const: aux # Auxiliary clock
> > > +                - const: cfg # Configuration clock
> > > +                - const: bus_master # Master AXI clock
> > > +                - const: bus_slave # Slave AXI clock
> > > +                - const: slave_q2a # Slave Q2A clock
> > > +                - const: tbu # PCIe TBU clock
> > > +                - const: ddrss_sf_tbu # PCIe SF TBU clock
> > > +                - const: aggre0 # Aggre NoC PCIe0 AXI clock
> >
> > 'enum: [ aggre0, aggre1 ]' and 'minItems: 12' would eliminate the 2nd
> > case. There's a implicit requirement that string names are unique (by
> > default).
>
> Wouldn't it also allow a single 'aggre0' string?

No, because it's only for the 12th entry in the list.

Rob