[PATCH 17/17] arm64: dts: mediatek: add mt8365-evk board device-tree
Fabien Parent
fparent at baylibre.com
Tue May 31 06:50:26 PDT 2022
Add device-tree for the MT8365-EVK board. The MT8365 EVK board
has the following IOs:
* DPI <-> HDMI bridge and HDMI connector.
* 2 audio jack
* 1 USB Type-A Host port
* 2 UART to USB port
* 1 battery connector
* 1 eMMC
* 1 SD card
* 2 camera connectors
* 1 M.2 slot for connectivity
* 1 DSI connector + touchscreen connector
* RPI compatible header
* 1 Ethernet port
Signed-off-by: Fabien Parent <fparent at baylibre.com>
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 578 ++++++++++++++++++++
2 files changed, 579 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index c7d4636a2cb7..02a9f784358e 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -40,4 +40,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
new file mode 100644
index 000000000000..8f472caa06a3
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
@@ -0,0 +1,578 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 BayLibre, SAS.
+ * Author: Fabien Parent <fparent at baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/mt8365-pinfunc.h>
+#include "mt8365.dtsi"
+#include "mt6357.dtsi"
+
+/ {
+ model = "MediaTek MT8365 Open Platform EVK";
+ compatible = "mediatek,mt8365-evk", "mediatek,mt8365";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+
+ connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_connector_out>;
+ };
+ };
+ };
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys>;
+
+ volume-up {
+ gpios = <&pio 24 GPIO_ACTIVE_LOW>;
+ label = "volume_up";
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+ };
+
+ memory at 40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0xc0000000>;
+ };
+
+ usb_otg_vbus: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 12 MiB reserved for OP-TEE (BL32)
+ * +-----------------------+ 0x43e0_0000
+ * | SHMEM 2MiB |
+ * +-----------------------+ 0x43c0_0000
+ * | | TA_RAM 8MiB |
+ * + TZDRAM +--------------+ 0x4340_0000
+ * | | TEE_RAM 2MiB |
+ * +-----------------------+ 0x4320_0000
+ */
+ optee_reserved: optee at 43200000 {
+ no-map;
+ reg = <0 0x43200000 0 0x00c00000>;
+ };
+ };
+};
+
+&cpu0 {
+ proc-supply = <&mt6357_vproc_reg>;
+ sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu1 {
+ proc-supply = <&mt6357_vproc_reg>;
+ sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu2 {
+ proc-supply = <&mt6357_vproc_reg>;
+ sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu3 {
+ proc-supply = <&mt6357_vproc_reg>;
+ sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&dpi0 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&dpi_func_pins>;
+ pinctrl-1 = <&dpi_idle_pins>;
+ assigned-clocks = <&topckgen CLK_TOP_DPI0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_LVDSPLL_D4>;
+
+ /*
+ * Ethernet and HDMI are sharing pins.
+ * Only one can be enabled at a time and require the physical switch
+ * SW2101 to be set on DPI position
+ */
+ status = "okay";
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&it66121_in>;
+ };
+ };
+};
+
+ðernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <ðernet_pins>;
+ phy-handle = <ð_phy>;
+ phy-mode = "rmii";
+ mac-address = [00 00 00 00 00 00];
+
+ /*
+ * Ethernet and HDMI are sharing pins.
+ * Only one can be enabled at a time and require the physical switch
+ * SW2101 to be set on LAN position
+ */
+ status = "disabled";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth_phy: ethernet-phy at 0 {
+ reg = <0>;
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <100000>;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ it66121hdmitx: hdmi at 4c {
+ compatible = "ite,it66121";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ite_pins>;
+ vcn33-supply = <&mt6357_vibr_reg>;
+ vcn18-supply = <&mt6357_vsim2_reg>;
+ vrf12-supply = <&mt6357_vrf12_reg>;
+ reset-gpios = <&pio 69 GPIO_ACTIVE_LOW>;
+ interrupts-extended = <&pio 68 IRQ_TYPE_LEVEL_LOW>;
+ #sound-dai-cells = <0>;
+ reg = <0x4c>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+
+ it66121_in: endpoint {
+ bus-width = <12>;
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ hdmi_connector_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+};
+
+&mmc0 {
+ status = "okay";
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc0_pins_default>;
+ pinctrl-1 = <&mmc0_pins_uhs>;
+ bus-width = <8>;
+ max-frequency = <200000000>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ cap-mmc-hw-reset;
+ no-sdio;
+ no-sd;
+ hs400-ds-delay = <0x12012>;
+ vmmc-supply = <&mt6357_vemc_reg>;
+ vqmmc-supply = <&mt6357_vio18_reg>;
+ assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
+ assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>;
+ non-removable;
+};
+
+&mmc1 {
+ pinctrl-names = "default", "state_uhs";
+ pinctrl-0 = <&mmc1_pins_default>;
+ pinctrl-1 = <&mmc1_pins_uhs>;
+ cd-gpios = <&pio 76 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ max-frequency = <200000000>;
+ cap-sd-highspeed;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+ vmmc-supply = <&mt6357_vmch_reg>;
+ vqmmc-supply = <&mt6357_vio18_reg>;
+ status = "okay";
+};
+
+&mt6357_pmic {
+ interrupt-parent = <&pio>;
+ interrupts = <145 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+};
+
+&mt6357_vibr_reg {
+ regulator-always-on;
+};
+
+/* Needed by MSDC1 */
+&mt6357_vmc_reg {
+ regulator-always-on;
+};
+
+&mt6357_vrf12_reg {
+ regulator-always-on;
+};
+
+&mt6357_vsim2_reg {
+ regulator-always-on;
+};
+
+&mt6357keys {
+ power-key {
+ label = "power";
+ linux,keycodes = <KEY_POWER>;
+ wakeup-source;
+ };
+
+ volume-down {
+ label = "volume_down";
+ linux,keycodes = <KEY_VOLUMEDOWN>;
+ wakeup-source;
+ };
+};
+
+&pio {
+ dpi_func_pins: dpi-func-pins {
+ pins {
+ pinmux = <MT8365_PIN_0_GPIO0__FUNC_DPI_D0>,
+ <MT8365_PIN_1_GPIO1__FUNC_DPI_D1>,
+ <MT8365_PIN_2_GPIO2__FUNC_DPI_D2>,
+ <MT8365_PIN_3_GPIO3__FUNC_DPI_D3>,
+ <MT8365_PIN_4_GPIO4__FUNC_DPI_D4>,
+ <MT8365_PIN_5_GPIO5__FUNC_DPI_D5>,
+ <MT8365_PIN_6_GPIO6__FUNC_DPI_D6>,
+ <MT8365_PIN_7_GPIO7__FUNC_DPI_D7>,
+ <MT8365_PIN_8_GPIO8__FUNC_DPI_D8>,
+ <MT8365_PIN_9_GPIO9__FUNC_DPI_D9>,
+ <MT8365_PIN_10_GPIO10__FUNC_DPI_D10>,
+ <MT8365_PIN_11_GPIO11__FUNC_DPI_D11>,
+ <MT8365_PIN_12_GPIO12__FUNC_DPI_DE>,
+ <MT8365_PIN_13_GPIO13__FUNC_DPI_VSYNC>,
+ <MT8365_PIN_14_GPIO14__FUNC_DPI_CK>,
+ <MT8365_PIN_15_GPIO15__FUNC_DPI_HSYNC>;
+ drive-strength = <MTK_DRIVE_4mA>;
+ };
+ };
+
+ dpi_idle_pins: dpi-idle-pins {
+ pins {
+ pinmux = <MT8365_PIN_0_GPIO0__FUNC_GPIO0>,
+ <MT8365_PIN_1_GPIO1__FUNC_GPIO1>,
+ <MT8365_PIN_2_GPIO2__FUNC_GPIO2>,
+ <MT8365_PIN_3_GPIO3__FUNC_GPIO3>,
+ <MT8365_PIN_4_GPIO4__FUNC_GPIO4>,
+ <MT8365_PIN_5_GPIO5__FUNC_GPIO5>,
+ <MT8365_PIN_6_GPIO6__FUNC_GPIO6>,
+ <MT8365_PIN_7_GPIO7__FUNC_GPIO7>,
+ <MT8365_PIN_8_GPIO8__FUNC_GPIO8>,
+ <MT8365_PIN_9_GPIO9__FUNC_GPIO9>,
+ <MT8365_PIN_10_GPIO10__FUNC_GPIO10>,
+ <MT8365_PIN_11_GPIO11__FUNC_GPIO11>,
+ <MT8365_PIN_12_GPIO12__FUNC_GPIO12>,
+ <MT8365_PIN_13_GPIO13__FUNC_GPIO13>,
+ <MT8365_PIN_14_GPIO14__FUNC_GPIO14>,
+ <MT8365_PIN_15_GPIO15__FUNC_GPIO15>;
+ };
+ };
+
+ ethernet_pins: ethernet-pins {
+ pins-ethernet {
+ pinmux = <MT8365_PIN_0_GPIO0__FUNC_EXT_TXD0>,
+ <MT8365_PIN_1_GPIO1__FUNC_EXT_TXD1>,
+ <MT8365_PIN_2_GPIO2__FUNC_EXT_TXD2>,
+ <MT8365_PIN_3_GPIO3__FUNC_EXT_TXD3>,
+ <MT8365_PIN_4_GPIO4__FUNC_EXT_TXC>,
+ <MT8365_PIN_5_GPIO5__FUNC_EXT_RXER>,
+ <MT8365_PIN_6_GPIO6__FUNC_EXT_RXC>,
+ <MT8365_PIN_7_GPIO7__FUNC_EXT_RXDV>,
+ <MT8365_PIN_8_GPIO8__FUNC_EXT_RXD0>,
+ <MT8365_PIN_9_GPIO9__FUNC_EXT_RXD1>,
+ <MT8365_PIN_10_GPIO10__FUNC_EXT_RXD2>,
+ <MT8365_PIN_11_GPIO11__FUNC_EXT_RXD3>,
+ <MT8365_PIN_12_GPIO12__FUNC_EXT_TXEN>,
+ <MT8365_PIN_13_GPIO13__FUNC_EXT_COL>,
+ <MT8365_PIN_14_GPIO14__FUNC_EXT_MDIO>,
+ <MT8365_PIN_15_GPIO15__FUNC_EXT_MDC>;
+ };
+
+ pins-phy-reset {
+ pinmux = <MT8365_PIN_133_TDM_TX_DATA1__FUNC_GPIO133>;
+ };
+ };
+
+ gpio_keys: gpio-keys-pins {
+ pins {
+ pinmux = <MT8365_PIN_24_KPCOL0__FUNC_KPCOL0>;
+ bias-pull-up;
+ input-enable;
+ };
+ };
+
+ i2c1_pins: i2c1-pins {
+ pins {
+ pinmux = <MT8365_PIN_59_SDA1__FUNC_SDA1_0>,
+ <MT8365_PIN_60_SCL1__FUNC_SCL1_0>;
+ mediatek,pull-up-adv = <3>;
+ mediatek,drive-strength-adv = <00>;
+ bias-pull-up;
+ };
+ };
+
+ ite_pins: ite-pins {
+ pins-rst-ite {
+ pinmux = <MT8365_PIN_69_CMDAT1__FUNC_GPIO69>;
+ output-high;
+ };
+
+ pins-irq-ite {
+ pinmux = <MT8365_PIN_68_CMDAT0__FUNC_GPIO68>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins-pwr {
+ pinmux = <MT8365_PIN_70_CMDAT2__FUNC_GPIO70>,
+ <MT8365_PIN_71_CMDAT3__FUNC_GPIO71>;
+ output-high;
+ };
+ };
+
+ mmc0_pins_default: mmc0-default-pins {
+ pins-clk {
+ pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
+ bias-pull-down;
+ };
+
+ pins-cmd-dat {
+ pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+ <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+ <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+ <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+ <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+ <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+ <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+ <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+ <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins-rst {
+ pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc0_pins_uhs: mmc0-uhs-pins {
+ pins-clk {
+ pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
+ drive-strength = <MTK_DRIVE_10mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-cmd-dat {
+ pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+ <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+ <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+ <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+ <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+ <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+ <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+ <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+ <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_10mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-ds {
+ pinmux = <MT8365_PIN_104_MSDC0_DSL__FUNC_MSDC0_DSL>;
+ drive-strength = <MTK_DRIVE_10mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-rst {
+ pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
+ drive-strength = <MTK_DRIVE_10mA>;
+ bias-pull-up;
+ };
+ };
+
+ mmc1_pins_default: mmc1-default-pins {
+ pins-cd {
+ pinmux = <MT8365_PIN_76_CMDAT8__FUNC_GPIO76>;
+ bias-pull-up;
+ };
+
+ pins-clk {
+ pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-cmd-dat {
+ pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+ <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+ <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+ <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+ <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
+ input-enable;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ mmc1_pins_uhs: mmc1-uhs-pins {
+ pins-clk {
+ pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-cmd-dat {
+ pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+ <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+ <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+ <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+ <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_6mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ pins {
+ pinmux = <MT8365_PIN_35_URXD0__FUNC_URXD0>,
+ <MT8365_PIN_36_UTXD0__FUNC_UTXD0>;
+ };
+ };
+
+ uart1_pins: uart1-pins {
+ pins {
+ pinmux = <MT8365_PIN_37_URXD1__FUNC_URXD1>,
+ <MT8365_PIN_38_UTXD1__FUNC_UTXD1>;
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ pins {
+ pinmux = <MT8365_PIN_39_URXD2__FUNC_URXD2>,
+ <MT8365_PIN_40_UTXD2__FUNC_UTXD2>;
+ };
+ };
+
+ usb_pins: usb-pins {
+ pins-id {
+ pinmux = <MT8365_PIN_17_GPIO17__FUNC_GPIO17>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins-usb0-vbus {
+ pinmux = <MT8365_PIN_16_GPIO16__FUNC_USB_DRVVBUS>;
+ output-high;
+ };
+
+ pin-usb1-vbus {
+ pinmux = <MT8365_PIN_18_GPIO18__FUNC_GPIO18>;
+ output-high;
+ };
+ };
+
+ pwm_pins: pwm-pins {
+ pins {
+ pinmux = <MT8365_PIN_19_DISP_PWM__FUNC_PWM_A>,
+ <MT8365_PIN_116_I2S_BCK__FUNC_PWM_C>;
+ };
+ };
+};
+
+&pwm {
+ pinctrl-0 = <&pwm_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&ssusb {
+ pinctrl-0 = <&usb_pins>;
+ pinctrl-names = "default";
+ maximum-speed = "high-speed";
+ usb-role-switch;
+ dr_mode = "otg";
+ vusb33-supply = <&mt6357_vusb33_reg>;
+ status = "okay";
+
+ connector {
+ compatible = "gpio-usb-b-connector", "usb-b-connector";
+ type = "micro";
+ id-gpios = <&pio 17 GPIO_ACTIVE_HIGH>;
+ vbus-supply = <&usb_otg_vbus>;
+ };
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&usb_host {
+ vusb33-supply = <&mt6357_vusb33_reg>;
+ status = "okay";
+};
--
2.36.1
More information about the linux-phy
mailing list