[PATCH v10 18/21] drm/mediatek: Add mt8195 Embedded DisplayPort driver
CK Hu
ck.hu at mediatek.com
Mon May 30 02:34:46 PDT 2022
Hi, Guillaume:
On Mon, 2022-05-23 at 12:47 +0200, Guillaume Ranquet wrote:
> From: Markus Schneider-Pargmann <msp at baylibre.com>
>
> This patch adds a DisplayPort driver for the Mediatek mt8195 SoC.
>
> It supports the mt8195, the embedded DisplayPort units. It offers
> DisplayPort 1.4 with up to 4 lanes.
>
> The driver creates a child device for the phy. The child device will
> never exist without the parent being active. As they are sharing a
> register range, the parent passes a regmap pointer to the child so
> that
> both can work with the same register range. The phy driver sets
> device
> data that is read by the parent to get the phy device that can be
> used
> to control the phy properties.
>
> This driver is based on an initial version by
> Jason-JH.Lin <jason-jh.lin at mediatek.com>.
>
> Signed-off-by: Markus Schneider-Pargmann <msp at baylibre.com>
> Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
>
[snip]
> +
> +static void mtk_dp_read_link_status(struct mtk_dp *mtk_dp,
> + u8
> link_status[DP_LINK_STATUS_SIZE])
> +{
> + drm_dp_dpcd_read(&mtk_dp->aux, DP_LANE0_1_STATUS, link_status,
> + DP_LINK_STATUS_SIZE);
> +}
> +
> +static int mtk_dp_train_tps_1(struct mtk_dp *mtk_dp,
> + u8 target_lane_count, int
> *iteration_count, u8 *lane_adjust, int *status_control, u8
> *prev_lane_adjust)
> +{
> + int ret;
> + u8 val;
> + u8 link_status[DP_LINK_STATUS_SIZE] = {};
> +
> + ret = mtk_dp_training_set_scramble(mtk_dp, false);
> + if (ret)
> + return ret;
> +
> + if (*status_control == 0) {
> + ret = mtk_dp_train_set_pattern(mtk_dp, 1);
> + if (ret)
> + return ret;
> +
> + val = DP_LINK_SCRAMBLING_DISABLE |
> + DP_TRAINING_PATTERN_1;
> + drm_dp_dpcd_writeb(&mtk_dp->aux,
> + DP_TRAINING_PATTERN_SET,
> + DP_LINK_SCRAMBLING_DISABLE |
> + DP_TRAINING_PATTERN_1);
> + drm_dp_dpcd_read(&mtk_dp->aux,
> + DP_ADJUST_REQUEST_LANE0_1,
> + lane_adjust,
> + sizeof(*lane_adjust) * 2);
> +
> + mtk_dp_train_update_swing_pre(mtk_dp,
> + target_lane_count,
> lane_adjust);
> + *status_control = 1;
> + (*iteration_count)++;
> + }
> +
> + drm_dp_link_train_clock_recovery_delay(&mtk_dp->aux,
> + mtk_dp->rx_cap);
> + mtk_dp_read_link_status(mtk_dp, link_status);
drm_dp_dpcd_read_link_status(&mtk_dp->aux, link_status);
> +
> + if (drm_dp_clock_recovery_ok(link_status,
> + target_lane_count)) {
> + mtk_dp->train_info.cr_done = true;
> + *iteration_count = 1;
> + dev_dbg(mtk_dp->dev, "Link train CR pass\n");
> + return 0;
> + } else if (*prev_lane_adjust == link_status[4]) {
> + (*iteration_count)++;
> + if (*prev_lane_adjust &
> DP_ADJUST_VOLTAGE_SWING_LANE0_MASK) {
> + dev_dbg(mtk_dp->dev, "Link train CQ fail\n");
> + return -EINVAL;
> + }
> + } else {
> + *prev_lane_adjust = link_status[4];
> + }
> + return -EAGAIN;
> +}
> +
> +static int mtk_dp_train_tps_2_3(struct mtk_dp *mtk_dp, u8
> target_linkrate,
> + u8 target_lane_count, int
> *iteration_count, u8 *lane_adjust, int *status_control, u8
> *prev_lane_adjust)
> +{
> + int ret;
> + u8 val;
> + u8 link_status[DP_LINK_STATUS_SIZE] = {};
> +
> + if (*status_control == 1) {
> + if (mtk_dp->train_info.tps4) {
> + ret = mtk_dp_train_set_pattern(mtk_dp, 4);
> + if (ret)
> + return -EINVAL;
> +
> + val = DP_TRAINING_PATTERN_4;
> + } else if (mtk_dp->train_info.tps3) {
> + ret = mtk_dp_train_set_pattern(mtk_dp, 3);
> + if (ret)
> + return -EINVAL;
> +
> + val = DP_LINK_SCRAMBLING_DISABLE |
> + DP_TRAINING_PATTERN_3;
> + } else {
> + ret = mtk_dp_train_set_pattern(mtk_dp, 2);
> + if (ret)
> + return -EINVAL;
> +
> + val = DP_LINK_SCRAMBLING_DISABLE |
> + DP_TRAINING_PATTERN_2;
> + }
> + drm_dp_dpcd_writeb(&mtk_dp->aux,
> + DP_TRAINING_PATTERN_SET,
> + val);
> +
> + drm_dp_dpcd_read(&mtk_dp->aux,
> + DP_ADJUST_REQUEST_LANE0_1,
> + lane_adjust,
> + sizeof(*lane_adjust) * 2);
> +
> + mtk_dp_train_update_swing_pre(mtk_dp,
> + target_lane_count,
> lane_adjust);
> + *status_control = 2;
> + (*iteration_count)++;
> + }
> +
> + drm_dp_link_train_channel_eq_delay(&mtk_dp->aux,
> + mtk_dp->rx_cap);
> +
> + mtk_dp_read_link_status(mtk_dp, link_status);
drm_dp_dpcd_read_link_status(&mtk_dp->aux, link_status);
Regards,
CK
> +
> + if (!drm_dp_clock_recovery_ok(link_status,
> + target_lane_count)) {
> + mtk_dp->train_info.cr_done = false;
> + mtk_dp->train_info.eq_done = false;
> + dev_dbg(mtk_dp->dev, "Link train EQ fail\n");
> + return -EINVAL;
> + }
> +
> + if (drm_dp_channel_eq_ok(link_status,
> + target_lane_count)) {
> + mtk_dp->train_info.eq_done = true;
> + dev_dbg(mtk_dp->dev, "Link train EQ pass\n");
> + return 0;
> + }
> +
> + if (*prev_lane_adjust == link_status[4])
> + (*iteration_count)++;
> + else
> + *prev_lane_adjust = link_status[4];
> +
> + return -EAGAIN;
> +}
> +
>
More information about the linux-phy
mailing list