[RFC PATCH v2 33/34] phy: qcom-qmp: move SM8250 DP PHY to new QMP driver

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Wed May 25 16:58:40 PDT 2022


Move support for the DP PHY driver on SM8250 platform to new QMP
driver.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c |  53 ++
 drivers/phy/qualcomm/phy-qcom-qmp-lib.h   |   1 +
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c   |   3 +-
 drivers/phy/qualcomm/phy-qcom-qmp.c       | 598 ----------------------
 4 files changed, 56 insertions(+), 599 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 77fb05144769..57e42ef6fa45 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -269,11 +269,20 @@ static const char * const qmp_v3_phy_clk_l[] = {
 	"aux", "cfg_ahb", "ref", "com_aux",
 };
 
+/* the primary usb3 phy on sm8250 doesn't have a ref clock */
+static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
+	"aux", "ref_clk_src", "com_aux"
+};
+
 /* list of resets */
 static const char * const sc7180_usb3phy_reset_l[] = {
 	"phy",
 };
 
+static const char * const sm8250_usb3phy_reset_l[] = {
+	"phy", "common",
+};
+
 /* list of regulators */
 static const char * const qmp_phy_vreg_l[] = {
 	"vdda-phy", "vdda-pll",
@@ -363,6 +372,47 @@ static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
 	.dp_cfg			= &sc8180x_dpphy_cfg,
 };
 
+static const struct qmp_phy_dp_cfg sm8250_dpphy_cfg = {
+	.base = {
+		.type			= PHY_TYPE_DP,
+		.nlanes			= 1,
+
+		.serdes_tbl		= qmp_v4_dp_serdes_tbl,
+		.serdes_tbl_num		= ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
+		.tx_tbl			= qmp_v4_dp_tx_tbl,
+		.tx_tbl_num		= ARRAY_SIZE(qmp_v4_dp_tx_tbl),
+
+		.clk_list		= qmp_v4_sm8250_usbphy_clk_l,
+		.num_clks		= ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
+		.reset_list		= sm8250_usb3phy_reset_l,
+		.num_resets		= ARRAY_SIZE(sm8250_usb3phy_reset_l),
+		.vreg_list		= qmp_phy_vreg_l,
+		.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+		.regs			= qmp_v4_usb3phy_regs_layout,
+
+		.is_dual_lane_phy	= true,
+	},
+
+	.serdes_tbl_rbr		= qmp_v4_dp_serdes_tbl_rbr,
+	.serdes_tbl_rbr_num	= ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
+	.serdes_tbl_hbr		= qmp_v4_dp_serdes_tbl_hbr,
+	.serdes_tbl_hbr_num	= ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
+	.serdes_tbl_hbr2	= qmp_v4_dp_serdes_tbl_hbr2,
+	.serdes_tbl_hbr2_num	= ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
+	.serdes_tbl_hbr3	= qmp_v4_dp_serdes_tbl_hbr3,
+	.serdes_tbl_hbr3_num	= ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
+
+	.dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
+	.configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
+	.configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
+	.calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
+};
+
+static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
+	.usb_cfg		= &sm8250_usb3phy_cfg,
+	.dp_cfg			= &sm8250_dpphy_cfg,
+};
+
 static const u8 qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = {
 	{ 0x00, 0x0c, 0x15, 0x1a },
 	{ 0x02, 0x0e, 0x16, 0xff },
@@ -1252,6 +1302,9 @@ static const struct of_device_id qcom_qmp_phy_combo_of_match_table[] = {
 	}, {
 		.compatible = "qcom,sc8180x-qmp-usb3-dp-phy",
 		.data = &sc8180x_usb3dpphy_cfg,
+	}, {
+		.compatible = "qcom,sm8250-qmp-usb3-dp-phy",
+		.data = &sm8250_usb3dpphy_cfg,
 	},
 	{ }
 };
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-lib.h b/drivers/phy/qualcomm/phy-qcom-qmp-lib.h
index dfc1fc7d3dba..7a994b73b8d9 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-lib.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-lib.h
@@ -306,5 +306,6 @@ extern const struct dev_pm_ops qcom_qmp_phy_usb_pm_ops;
 
 extern const struct qmp_phy_usb_cfg sc7180_usb3phy_cfg;
 extern const struct qmp_phy_usb_cfg sm8150_usb3phy_cfg;
+extern const struct qmp_phy_usb_cfg sm8250_usb3phy_cfg;
 
 #endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index 46f1ac79c04d..d6125a2ca9bb 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -1640,7 +1640,7 @@ static const struct qmp_phy_usb_cfg sm8150_usb3_uniphy_cfg = {
 	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
 };
 
-static const struct qmp_phy_usb_cfg sm8250_usb3phy_cfg = {
+const struct qmp_phy_usb_cfg sm8250_usb3phy_cfg = {
 	.base = {
 		.type			= PHY_TYPE_USB3,
 		.nlanes			= 1,
@@ -1674,6 +1674,7 @@ static const struct qmp_phy_usb_cfg sm8250_usb3phy_cfg = {
 
 	.has_phy_dp_com_ctrl	= true,
 };
+EXPORT_SYMBOL_GPL(sm8250_usb3phy_cfg);
 
 static const struct qmp_phy_usb_cfg sm8250_usb3_uniphy_cfg = {
 	.base = {
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 620008e247bb..1ba9ecbb2d8b 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -141,207 +141,6 @@ enum qphy_reg_layout {
 	QPHY_LAYOUT_SIZE
 };
 
-static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
-	[QPHY_SW_RESET]			= 0x00,
-	[QPHY_START_CTRL]		= 0x44,
-	[QPHY_PCS_STATUS]		= 0x14,
-	[QPHY_PCS_POWER_DOWN_CONTROL]	= 0x40,
-	[QPHY_PCS_AUTONOMOUS_MODE_CTRL]	= 0x308,
-	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x314,
-};
-
-static const struct qmp_phy_init_tbl sm8150_usb3_serdes_tbl[] = {
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
-};
-
-static const struct qmp_phy_init_tbl sm8250_usb3_tx_tbl[] = {
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x60),
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x60),
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
-	QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x40, 1),
-	QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x54, 2),
-};
-
-static const struct qmp_phy_init_tbl sm8250_usb3_rx_tbl[] = {
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
-	QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0xff, 1),
-	QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f, 2),
-	QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f, 1),
-	QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff, 2),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x7f),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x97),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
-	QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
-};
-
-static const struct qmp_phy_init_tbl sm8250_usb3_pcs_tbl[] = {
-	QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
-	QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
-	QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
-	QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
-	QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
-	QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
-	QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
-	QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
-	QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
-	QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
-	QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
-	QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
-	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
-	QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
-};
-
-static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl[] = {
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SVS_MODE_CLK_SEL, 0x05),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x3b),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYS_CLK_CTRL, 0x02),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_ENABLE1, 0x0c),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x06),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_CLK_SELECT, 0x30),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_IVCO, 0x0f),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_CONFIG, 0x02),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x00),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0x00),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_BG_TIMER, 0x0a),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE0, 0x0a),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_CTRL, 0x00),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN, 0x17),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORE_CLK_EN, 0x1f),
-};
-
-static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_rbr[] = {
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x05),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x6f),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x08),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
-};
-
-static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr[] = {
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x03),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x0f),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x0e),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
-};
-
-static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr2[] = {
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x8c),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x00),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x0a),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x1f),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x1c),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
-};
-
-static const struct qmp_phy_init_tbl qmp_v4_dp_serdes_tbl_hbr3[] = {
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x00),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x69),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0x80),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x07),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x2f),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x2a),
-	QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x08),
-};
-
-static const struct qmp_phy_init_tbl qmp_v4_dp_tx_tbl[] = {
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_VMODE_CTRL1, 0x40),
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_PRE_STALL_LDO_BOOST_EN, 0x30),
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_INTERFACE_SELECT, 0x3b),
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_CLKBUF_ENABLE, 0x0f),
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_RESET_TSYNC_EN, 0x03),
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_TRAN_DRVR_EMP_EN, 0x0f),
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_PARRATE_REC_DETECT_IDLE_EN, 0x00),
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_INTERFACE_MODE, 0x00),
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x11),
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_BAND, 0x4),
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_POL_INV, 0x0a),
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_DRV_LVL, 0x2a),
-	QMP_PHY_INIT_CFG(QSERDES_V4_TX_TX_EMP_POST1_LVL, 0x20),
-};
-
 struct qmp_phy;
 
 /* struct qmp_phy_cfg - per-PHY initialization config */
@@ -510,11 +309,6 @@ struct qcom_qmp {
 	struct reset_control *ufs_reset;
 };
 
-static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy);
-static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy);
-static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy);
-static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy);
-
 static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
 {
 	u32 reg;
@@ -539,97 +333,6 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 	readl(base + offset);
 }
 
-static const char * const qmp_v4_phy_clk_l[] = {
-	"aux", "ref_clk_src", "ref", "com_aux",
-};
-
-/* the primary usb3 phy on sm8250 doesn't have a ref clock */
-static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
-	"aux", "ref_clk_src", "com_aux"
-};
-
-/* list of resets */
-static const char * const msm8996_usb3phy_reset_l[] = {
-	"phy", "common",
-};
-
-/* list of regulators */
-static const char * const qmp_phy_vreg_l[] = {
-	"vdda-phy", "vdda-pll",
-};
-
-static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
-	.type			= PHY_TYPE_USB3,
-	.nlanes			= 1,
-
-	.serdes_tbl		= sm8150_usb3_serdes_tbl,
-	.serdes_tbl_num		= ARRAY_SIZE(sm8150_usb3_serdes_tbl),
-	.tx_tbl			= sm8250_usb3_tx_tbl,
-	.tx_tbl_num		= ARRAY_SIZE(sm8250_usb3_tx_tbl),
-	.rx_tbl			= sm8250_usb3_rx_tbl,
-	.rx_tbl_num		= ARRAY_SIZE(sm8250_usb3_rx_tbl),
-	.pcs_tbl		= sm8250_usb3_pcs_tbl,
-	.pcs_tbl_num		= ARRAY_SIZE(sm8250_usb3_pcs_tbl),
-	.clk_list		= qmp_v4_sm8250_usbphy_clk_l,
-	.num_clks		= ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
-	.reset_list		= msm8996_usb3phy_reset_l,
-	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
-	.vreg_list		= qmp_phy_vreg_l,
-	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
-	.regs			= qmp_v4_usb3phy_regs_layout,
-
-	.start_ctrl		= SERDES_START | PCS_START,
-	.pwrdn_ctrl		= SW_PWRDN,
-	.phy_status		= PHYSTATUS,
-
-	.has_pwrdn_delay	= true,
-	.pwrdn_delay_min	= POWER_DOWN_DELAY_US_MIN,
-	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
-
-	.has_phy_dp_com_ctrl	= true,
-	.is_dual_lane_phy	= true,
-};
-
-static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
-	.type			= PHY_TYPE_DP,
-	.nlanes			= 1,
-
-	.serdes_tbl		= qmp_v4_dp_serdes_tbl,
-	.serdes_tbl_num		= ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
-	.tx_tbl			= qmp_v4_dp_tx_tbl,
-	.tx_tbl_num		= ARRAY_SIZE(qmp_v4_dp_tx_tbl),
-
-	.serdes_tbl_rbr		= qmp_v4_dp_serdes_tbl_rbr,
-	.serdes_tbl_rbr_num	= ARRAY_SIZE(qmp_v4_dp_serdes_tbl_rbr),
-	.serdes_tbl_hbr		= qmp_v4_dp_serdes_tbl_hbr,
-	.serdes_tbl_hbr_num	= ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr),
-	.serdes_tbl_hbr2	= qmp_v4_dp_serdes_tbl_hbr2,
-	.serdes_tbl_hbr2_num	= ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr2),
-	.serdes_tbl_hbr3	= qmp_v4_dp_serdes_tbl_hbr3,
-	.serdes_tbl_hbr3_num	= ARRAY_SIZE(qmp_v4_dp_serdes_tbl_hbr3),
-
-	.clk_list		= qmp_v4_phy_clk_l,
-	.num_clks		= ARRAY_SIZE(qmp_v4_phy_clk_l),
-	.reset_list		= msm8996_usb3phy_reset_l,
-	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
-	.vreg_list		= qmp_phy_vreg_l,
-	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
-	.regs			= qmp_v4_usb3phy_regs_layout,
-
-	.has_phy_dp_com_ctrl	= true,
-	.is_dual_lane_phy	= true,
-
-	.dp_aux_init = qcom_qmp_v4_phy_dp_aux_init,
-	.configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
-	.configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
-	.calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
-};
-
-static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
-	.usb_cfg		= &sm8250_usb3phy_cfg,
-	.dp_cfg			= &sm8250_dpphy_cfg,
-};
-
 static void qcom_qmp_phy_configure_lane(void __iomem *base,
 					const unsigned int *regs,
 					const struct qmp_phy_init_tbl tbl[],
@@ -728,299 +431,6 @@ static int qcom_qmp_phy_serdes_init(struct qmp_phy *qphy)
 	return 0;
 }
 
-static const u8 qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = {
-	{ 0x00, 0x0c, 0x15, 0x1a },
-	{ 0x02, 0x0e, 0x16, 0xff },
-	{ 0x02, 0x11, 0xff, 0xff },
-	{ 0x04, 0xff, 0xff, 0xff }
-};
-
-static const u8 qmp_dp_v3_voltage_swing_hbr3_hbr2[4][4] = {
-	{ 0x02, 0x12, 0x16, 0x1a },
-	{ 0x09, 0x19, 0x1f, 0xff },
-	{ 0x10, 0x1f, 0xff, 0xff },
-	{ 0x1f, 0xff, 0xff, 0xff }
-};
-
-static const u8 qmp_dp_v3_pre_emphasis_hbr_rbr[4][4] = {
-	{ 0x00, 0x0c, 0x14, 0x19 },
-	{ 0x00, 0x0b, 0x12, 0xff },
-	{ 0x00, 0x0b, 0xff, 0xff },
-	{ 0x04, 0xff, 0xff, 0xff }
-};
-
-static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
-	{ 0x08, 0x0f, 0x16, 0x1f },
-	{ 0x11, 0x1e, 0x1f, 0xff },
-	{ 0x19, 0x1f, 0xff, 0xff },
-	{ 0x1f, 0xff, 0xff, 0xff }
-};
-
-static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy,
-		unsigned int drv_lvl_reg, unsigned int emp_post_reg)
-{
-	const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
-	unsigned int v_level = 0, p_level = 0;
-	u8 voltage_swing_cfg, pre_emphasis_cfg;
-	int i;
-
-	for (i = 0; i < dp_opts->lanes; i++) {
-		v_level = max(v_level, dp_opts->voltage[i]);
-		p_level = max(p_level, dp_opts->pre[i]);
-	}
-
-	if (dp_opts->link_rate <= 2700) {
-		voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
-		pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
-	} else {
-		voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level];
-		pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level];
-	}
-
-	/* TODO: Move check to config check */
-	if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
-		return -EINVAL;
-
-	/* Enable MUX to use Cursor values from these registers */
-	voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
-	pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
-
-	writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg);
-	writel(pre_emphasis_cfg, qphy->tx + emp_post_reg);
-	writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg);
-	writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg);
-
-	return 0;
-}
-
-static bool qcom_qmp_phy_configure_dp_mode(struct qmp_phy *qphy)
-{
-	u32 val;
-	bool reverse = false;
-
-	val = DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
-	      DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN;
-
-	/*
-	 * TODO: Assume orientation is CC1 for now and two lanes, need to
-	 * use type-c connector to understand orientation and lanes.
-	 *
-	 * Otherwise val changes to be like below if this code understood
-	 * the orientation of the type-c cable.
-	 *
-	 * if (lane_cnt == 4 || orientation == ORIENTATION_CC2)
-	 *	val |= DP_PHY_PD_CTL_LANE_0_1_PWRDN;
-	 * if (lane_cnt == 4 || orientation == ORIENTATION_CC1)
-	 *	val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
-	 * if (orientation == ORIENTATION_CC2)
-	 *	writel(0x4c, qphy->pcs + QSERDES_V3_DP_PHY_MODE);
-	 */
-	val |= DP_PHY_PD_CTL_LANE_2_3_PWRDN;
-	writel(val, qphy->pcs + QSERDES_DP_PHY_PD_CTL);
-
-	writel(0x5c, qphy->pcs + QSERDES_DP_PHY_MODE);
-
-	return reverse;
-}
-
-static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
-{
-	writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
-	       DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN,
-	       qphy->pcs + QSERDES_DP_PHY_PD_CTL);
-
-	/* Turn on BIAS current for PHY/PLL */
-	writel(0x17, qphy->serdes + QSERDES_V4_COM_BIAS_EN_CLKBUFLR_EN);
-
-	writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG0);
-	writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
-	writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
-	writel(0x00, qphy->pcs + QSERDES_DP_PHY_AUX_CFG3);
-	writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG4);
-	writel(0x26, qphy->pcs + QSERDES_DP_PHY_AUX_CFG5);
-	writel(0x0a, qphy->pcs + QSERDES_DP_PHY_AUX_CFG6);
-	writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG7);
-	writel(0xb7, qphy->pcs + QSERDES_DP_PHY_AUX_CFG8);
-	writel(0x03, qphy->pcs + QSERDES_DP_PHY_AUX_CFG9);
-	qphy->dp_aux_cfg = 0;
-
-	writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
-	       PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
-	       PHY_AUX_REQ_ERR_MASK,
-	       qphy->pcs + QSERDES_V4_DP_PHY_AUX_INTERRUPT_MASK);
-}
-
-static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy)
-{
-	/* Program default values before writing proper values */
-	writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
-	writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
-
-	writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
-	writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
-
-	qcom_qmp_phy_configure_dp_swing(qphy,
-			QSERDES_V4_TX_TX_DRV_LVL,
-			QSERDES_V4_TX_TX_EMP_POST1_LVL);
-}
-
-static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
-{
-	const struct qmp_phy_dp_clks *dp_clks = qphy->dp_clks;
-	const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
-	u32 phy_vco_div, status;
-	unsigned long pixel_freq;
-	u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
-	bool reverse;
-
-	writel(0x0f, qphy->pcs + QSERDES_V4_DP_PHY_CFG_1);
-
-	reverse = qcom_qmp_phy_configure_dp_mode(qphy);
-
-	writel(0x13, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
-	writel(0xa4, qphy->pcs + QSERDES_DP_PHY_AUX_CFG2);
-
-	writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX0_TX1_LANE_CTL);
-	writel(0x05, qphy->pcs + QSERDES_V4_DP_PHY_TX2_TX3_LANE_CTL);
-
-	switch (dp_opts->link_rate) {
-	case 1620:
-		phy_vco_div = 0x1;
-		pixel_freq = 1620000000UL / 2;
-		break;
-	case 2700:
-		phy_vco_div = 0x1;
-		pixel_freq = 2700000000UL / 2;
-		break;
-	case 5400:
-		phy_vco_div = 0x2;
-		pixel_freq = 5400000000UL / 4;
-		break;
-	case 8100:
-		phy_vco_div = 0x0;
-		pixel_freq = 8100000000UL / 6;
-		break;
-	default:
-		/* Other link rates aren't supported */
-		return -EINVAL;
-	}
-	writel(phy_vco_div, qphy->pcs + QSERDES_V4_DP_PHY_VCO_DIV);
-
-	clk_set_rate(dp_clks->dp_link_hw.clk, dp_opts->link_rate * 100000);
-	clk_set_rate(dp_clks->dp_pixel_hw.clk, pixel_freq);
-
-	writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
-	writel(0x05, qphy->pcs + QSERDES_DP_PHY_CFG);
-	writel(0x01, qphy->pcs + QSERDES_DP_PHY_CFG);
-	writel(0x09, qphy->pcs + QSERDES_DP_PHY_CFG);
-
-	writel(0x20, qphy->serdes + QSERDES_V4_COM_RESETSM_CNTRL);
-
-	if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_C_READY_STATUS,
-			status,
-			((status & BIT(0)) > 0),
-			500,
-			10000))
-		return -ETIMEDOUT;
-
-	if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
-			status,
-			((status & BIT(0)) > 0),
-			500,
-			10000))
-		return -ETIMEDOUT;
-
-	if (readl_poll_timeout(qphy->serdes + QSERDES_V4_COM_CMN_STATUS,
-			status,
-			((status & BIT(1)) > 0),
-			500,
-			10000))
-		return -ETIMEDOUT;
-
-	writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
-
-	if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
-			status,
-			((status & BIT(0)) > 0),
-			500,
-			10000))
-		return -ETIMEDOUT;
-
-	if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
-			status,
-			((status & BIT(1)) > 0),
-			500,
-			10000))
-		return -ETIMEDOUT;
-
-	/*
-	 * At least for 7nm DP PHY this has to be done after enabling link
-	 * clock.
-	 */
-
-	if (dp_opts->lanes == 1) {
-		bias0_en = reverse ? 0x3e : 0x15;
-		bias1_en = reverse ? 0x15 : 0x3e;
-		drvr0_en = reverse ? 0x13 : 0x10;
-		drvr1_en = reverse ? 0x10 : 0x13;
-	} else if (dp_opts->lanes == 2) {
-		bias0_en = reverse ? 0x3f : 0x15;
-		bias1_en = reverse ? 0x15 : 0x3f;
-		drvr0_en = 0x10;
-		drvr1_en = 0x10;
-	} else {
-		bias0_en = 0x3f;
-		bias1_en = 0x3f;
-		drvr0_en = 0x10;
-		drvr1_en = 0x10;
-	}
-
-	writel(drvr0_en, qphy->tx + QSERDES_V4_TX_HIGHZ_DRVR_EN);
-	writel(bias0_en, qphy->tx + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
-	writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
-	writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
-
-	writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
-	udelay(2000);
-	writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
-
-	if (readl_poll_timeout(qphy->pcs + QSERDES_V4_DP_PHY_STATUS,
-			status,
-			((status & BIT(1)) > 0),
-			500,
-			10000))
-		return -ETIMEDOUT;
-
-	writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
-	writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);
-
-	writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
-	writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
-
-	writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
-	writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
-
-	return 0;
-}
-
-/*
- * We need to calibrate the aux setting here as many times
- * as the caller tries
- */
-static int qcom_qmp_v4_dp_phy_calibrate(struct qmp_phy *qphy)
-{
-	static const u8 cfg1_settings[] = { 0x20, 0x13, 0x23, 0x1d };
-	u8 val;
-
-	qphy->dp_aux_cfg++;
-	qphy->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
-	val = cfg1_settings[qphy->dp_aux_cfg];
-
-	writel(val, qphy->pcs + QSERDES_DP_PHY_AUX_CFG1);
-
-	return 0;
-}
-
 static int qcom_qmp_dp_phy_configure(struct phy *phy, union phy_configure_opts *opts)
 {
 	const struct phy_configure_opts_dp *dp_opts = &opts->dp;
@@ -2001,19 +1411,11 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id,
 }
 
 static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
-	{
-		.compatible = "qcom,sm8250-qmp-usb3-dp-phy",
-		/* It's a combo phy */
-	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, qcom_qmp_phy_of_match_table);
 
 static const struct of_device_id qcom_qmp_combo_phy_of_match_table[] = {
-	{
-		.compatible = "qcom,sm8250-qmp-usb3-dp-phy",
-		.data = &sm8250_usb3dpphy_cfg,
-	},
 	{ }
 };
 
-- 
2.35.1




More information about the linux-phy mailing list