[PATCH v6 3/3] arm64: dts: qcom: sc7280: Update SNPS Phy params for SC7280 IDP device

[Krzysztof Kozlowski]

On 19/05/2022 06:28, Krishna Kurapati wrote:
> Overriding the SNPS Phy tuning parameters for SC7280 IDP device.
> 
> Signed-off-by: Krishna Kurapati <quic_kriskura at quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index 5eb6689..556fb04 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -325,6 +325,12 @@
>  	vdda-pll-supply = <&vreg_l10c_0p8>;
>  	vdda33-supply = <&vreg_l2b_3p0>;
>  	vdda18-supply = <&vreg_l1c_1p8>;
> +	qcom,hs-rise-fall-time-bp = <0>;
> +	qcom,squelch-detector-bp = <(-2090)>;
> +	qcom,hs-disconnect-bp = <1743>;
> +	qcom,hs-amplitude-bp = <1780>;
> +	qcom,hs-crossover-voltage-microvolt = <(-31000)>;
> +	qcom,hs-output-impedance-micro-ohm = <2600000>;

Not correct property name.


Best regards,
Krzysztof