[PATCH] phy: qcom: fix missing clk_disable_unprepare() on err in qcom_pcie2_phy_power_on

[Peng Wu]

Fix the missing clk_disable_unprepare() before return
from qcom_pcie2_phy_power_on() in the error handling case.

Signed-off-by: Peng Wu <wupeng58 at huawei.com>
---
 drivers/phy/qualcomm/phy-qcom-pcie2.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-pcie2.c b/drivers/phy/qualcomm/phy-qcom-pcie2.c
index 5407e59bb185..1cc8145e0811 100644
--- a/drivers/phy/qualcomm/phy-qcom-pcie2.c
+++ b/drivers/phy/qualcomm/phy-qcom-pcie2.c
@@ -162,8 +162,10 @@ static int qcom_pcie2_phy_power_on(struct phy *phy)
 
 	ret = readl_poll_timeout(qphy->base + PCIE20_PARF_PHY_STTS, val,
 				 !(val & BIT(0)), 1000, 10);
-	if (ret)
+	if (ret) {
+		clk_disable_unprepare(qphy->pipe_clk);
 		dev_err(qphy->dev, "phy initialization failed\n");
+	}
 
 out:
 	return ret;
-- 
2.17.1