[PATCH v0.5 8/9] arm64: dts: imx8mp: add HDMI display pipeline
Lucas Stach
l.stach at pengutronix.de
Fri May 6 11:10:33 PDT 2022
This adds the DT nodes for all the peripherals that make up the
HDMI display pipeline.
Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 81 +++++++++++++++++++++++
1 file changed, 81 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 6fcbfe9d59b8..47173ece95a5 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1124,6 +1124,87 @@ irqsteer_hdmi: interrupt-controller at 32fc2000 {
clock-names = "ipg";
power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>;
};
+
+ hdmi_pvi: display-bridge at 32fc4000 {
+ compatible = "fsl,imx8mp-hdmi-pvi";
+ reg = <0x32fc4000 0x40>;
+ power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ pvi_from_lcdif3: endpoint {
+ remote-endpoint = <&lcdif3_to_pvi>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ pvi_to_hdmi_tx: endpoint {
+ remote-endpoint = <&hdmi_tx_from_pvi>;
+ };
+ };
+ };
+ };
+
+ lcdif3: display-controller at 32fc6000 {
+ compatible = "fsl,imx8mp-lcdif";
+ reg = <0x32fc6000 0x238>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&irqsteer_hdmi>;
+ clocks = <&hdmi_tx_phy>,
+ <&clk IMX8MP_CLK_HDMI_APB>,
+ <&clk IMX8MP_CLK_HDMI_ROOT>;
+ clock-names = "pix", "axi", "disp_axi";
+ power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_LCDIF>;
+
+ port {
+ lcdif3_to_pvi: endpoint {
+ remote-endpoint = <&pvi_from_lcdif3>;
+ };
+ };
+ };
+
+ hdmi_tx: hdmi at 32fd8000 {
+ compatible = "fsl,imx8mp-hdmi";
+ reg = <0x32fd8000 0x7eff>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&irqsteer_hdmi>;
+ clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+ <&clk IMX8MP_CLK_HDMI_REF_266M>,
+ <&clk IMX8MP_CLK_HDMI_FDCC_TST>,
+ <&clk IMX8MP_CLK_32K>,
+ <&hdmi_tx_phy>;
+ clock-names = "iahb", "isfr", "fdcc", "cec", "pix";
+ assigned-clocks = <&clk IMX8MP_CLK_HDMI_REF_266M>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>;
+ power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX>;
+ reg-io-width = <1>;
+ status = "disabled";
+
+ port {
+ hdmi_tx_from_pvi: endpoint {
+ remote-endpoint = <&pvi_to_hdmi_tx>;
+ };
+ };
+ };
+
+ hdmi_tx_phy: phy at 32fdff00 {
+ compatible = "fsl,imx8mp-hdmi-phy";
+ reg = <0x32fdff00 0x100>;
+ clocks = <&clk IMX8MP_CLK_HDMI_APB>,
+ <&clk IMX8MP_CLK_HDMI_24M>;
+ clock-names = "apb", "ref";
+ assigned-clocks = <&clk IMX8MP_CLK_HDMI_24M>;
+ assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
+ power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>;
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
};
gpu3d: gpu at 38000000 {
--
2.30.2
More information about the linux-phy
mailing list