[PATCH v3 5/5] dt-bindings: phy: uniphier: Clean up clocks, resets, and their names using compatible string

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Wed Mar 30 22:53:50 PDT 2022


On 31/03/2022 02:50, Kunihiko Hayashi wrote:
> Hi Krzysztof,
> 
> On 2022/03/31 2:40, Krzysztof Kozlowski wrote:
>> On 30/03/2022 12:55, Kunihiko Hayashi wrote:
>>> Instead of "oneOf:" choices, use "allOf:" and "if:" to define clocks,
>>> clock-names, resets, and reset-names that can be taken by the compatible
>>> string.
>>>
>>> The order of clock-names and reset-names doesn't change here.
>>>
>>> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko at socionext.com>
>>> ---
>>>   .../phy/socionext,uniphier-ahci-phy.yaml      | 90 +++++++++++++-----
>>>   .../phy/socionext,uniphier-pcie-phy.yaml      | 47 ++++++---
>>>   .../phy/socionext,uniphier-usb3hs-phy.yaml    | 93 ++++++++++++++----
>>>   .../phy/socionext,uniphier-usb3ss-phy.yaml    | 95 +++++++++++++++----
>>>   4 files changed, 251 insertions(+), 74 deletions(-)
>>>
>>
>> (...)
>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
>>> b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
>>> index 1bbd164f2527..21e4414eea60 100644
>>> ---
>>> a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
>>> +++
>>> b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
>>> @@ -34,30 +34,12 @@ properties:
>>>       minItems: 2
>>>       maxItems: 3
>>>
>>> -  clock-names:
>>> -    oneOf:
>>> -      - items:               # for Pro5
>>> -          - const: gio
>>> -          - const: link
>>> -      - items:               # for PXs3 with phy-ext
>>> -          - const: link
>>> -          - const: phy
>>> -          - const: phy-ext
>>> -      - items:               # for others
>>> -          - const: link
>>> -          - const: phy
>>> +  clock-names: true
>>>
>>>     resets:
>>>       maxItems: 2
>>>
>>> -  reset-names:
>>> -    oneOf:
>>> -      - items:               # for Pro5
>>> -          - const: gio
>>> -          - const: link
>>> -      - items:               # for others
>>> -          - const: link
>>> -          - const: phy
>>> +  reset-names: true
>>>
>>>     vbus-supply:
>>>       description: A phandle to the regulator for USB VBUS
>>> @@ -80,6 +62,77 @@ properties:
>>>         required for each port, if any one is omitted, the trimming data
>>>         of the port will not be set at all.
>>>
>>> +allOf:
>>> +  - if:
>>> +      properties:
>>> +        compatible:
>>> +          contains:
>>> +            const: socionext,uniphier-pro5-usb3-hsphy
>>> +    then:
>>> +      properties:
>>> +        clocks:
>>> +          minItems: 2
>>> +          maxItems: 2
>>> +        clock-names:
>>> +          items:
>>> +            - const: gio
>>> +            - const: link
>>> +        resets:
>>> +          minItems: 2
>>> +          maxItems: 2
>>> +        reset-names:
>>> +          items:
>>> +            - const: gio
>>> +            - const: link
>>> +  - if:
>>> +      properties:
>>> +        compatible:
>>> +          contains:
>>> +            enum:
>>> +              - socionext,uniphier-pxs2-usb3-hsphy
>>> +              - socionext,uniphier-ld20-usb3-hsphy
>>> +    then:
>>> +      properties:
>>> +        clocks:
>>> +          minItems: 2
>>> +          maxItems: 2
>>> +        clock-names:
>>> +          items:
>>> +            - const: link
>>> +            - const: phy
>>> +        resets:
>>> +          minItems: 2
>>> +          maxItems: 2
>>> +        reset-names:
>>> +          items:
>>> +            - const: link
>>> +            - const: phy
>>> +  - if:
>>> +      properties:
>>> +        compatible:
>>> +          contains:
>>> +            enum:
>>> +              - socionext,uniphier-pxs3-usb3-hsphy
>>> +              - socionext,uniphier-nx1-usb3-hsphy
>>> +    then:
>>> +      properties:
>>> +        clocks:
>>> +          minItems: 2
>>
>> Why minItems:2? Is the last phy-ext clock optional?
> 
> In an SoC with two controllers, there is a controller that requires extra
> clock and a controller that does not. For example, PXs3 USB3 controller 1
> needs "phy-ext" clock, but the controller 0 doesn't.
> 
> This difference is related to the phy configuration, where the controller 1
> requires more clocks because it shares the phy with other subsystems.
> 
> So I think the last phy-ext clock should be optional.
> 

OK, thanks for explanation. I assume we talk about the hardware, not
about Linux driver needs. :)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>


Best regards,
Krzysztof



More information about the linux-phy mailing list