[PATCH 0/5] Add support for Axis, ARTPEC-8 PCIe driver

Krzysztof Kozlowski krzk at kernel.org
Mon Mar 28 04:40:11 PDT 2022


On 28/03/2022 13:29, 이왕석 wrote:
>> --------- Original Message ---------
>> Sender : Krzysztof Kozlowski <krzk at kernel.org>
>> Date : 2022-03-28 18:38 (GMT+9)
>> Title : Re: [PATCH 0/5] Add support for Axis, ARTPEC-8 PCIe driver
>>
>> On 28/03/2022 11:02, 이왕석 wrote:
>>>>  --------- Original Message ---------
>>>>  Sender : Krzysztof Kozlowski <krzk at kernel.org>
>>>>  Date : 2022-03-28 16:12 (GMT+9)
>>>>  Title : Re: [PATCH 0/5] Add support for Axis, ARTPEC-8 PCIe driver
>>>>
>>>>  On 28/03/2022 03:44, 이왕석 wrote:
>>>>>   This series patches include newly PCIe support for Axis ARTPEC-8 SoC.
>>>>>   ARTPEC-8 is the SoC platform of Axis Communications.
>>>>>   PCIe controller driver and phy driver have been newly added.
>>>>>   There is also a new MAINTAINER in the addition of phy driver.
>>>>>   PCIe controller is designed based on Design-Ware PCIe controller IP
>>>>>   and PCIe phy is desinged based on SAMSUNG PHY IP.
>>>>>   It also includes modifications to the Design-Ware controller driver to 
>>>>>   run the 64bit-based ARTPEC-8 PCIe controller driver.
>>>>>   It consists of 6 patches in total.
>>>>>   
>>>>>   This series has been tested on AXIS SW bring-up board 
>>>>>   with ARTPEC-8 chipset.
>>>>
>>>>  You lost mail threading. This makes reading this difficult for us. Plus
>>>>  you sent something non-applicable (patch #2), so please resend.
>>>>
>>>>  Knowing recent Samsung reluctance to extend existing drivers and always
>>>>  duplicate, please provide description/analysis why this driver cannot be
>>>>  combined with existing driver. The answer like: we need several syscon
>>>>  because we do not implement other frameworks (like interconnect) are not
>>>>  valid.
>>>>
>>>>  Best regards,
>>>>  Krzysztof
>>>  
>>>  Hello, Krzysztof
>>>  Thanks for your review.
>>>  
>>>  patch#2 was sent to the wrong format so sent again.
>>>  Sorry for causing confusion.
>>  
>> The first sending was HTML. Second was broken text, so still not working.
>>
>> Please resend everything with proper threading.
> 
> Hello, Krzysztof
> 
> I sent patch#2 three times.
> due to the influence of the email system,
> there was something wrong with the first and second mails.
> Sorry for causing confusion.
> Did you receive the third patch i sent you?

Maybe, I don't know. It's not threaded so it's difficult to find it
among other 100 emails...

>  
>>>  This patch is specialized in Artpec-8, 
>>>  the SoC Platform of Axis Communication, and is newly applied.
>>>  Since the target SoC platform is different from the driver previously 
>>>  used by Samsung, it is difficult to merge with the existing driver.
>>
>> Recently I always saw such answers and sometimes it was true, sometimes
>> not. What is exactly different?
>>
>> Best regards,
>> Krzysztof
> 
> The main reason this patch should be added is that
> this patch is not the driver applied to exynos platform.

Still this does not explain why you need separate driver.

> Because the SoC platform is different, 
> the IP configuration of PCIe is also different.

What is exactly different? Usually drivers can support IP blocks with
some differences...

> We will organize a driver for Artpec-8 platform and 
> if there is no special reason, maintain this 
> without adding it from the next series.

I don't understand this.


Best regards,
Krzysztof



More information about the linux-phy mailing list