[PATCH net-next v4 2/8] dt-bindings: phy: add the "fsl, lynx-28g" compatible

[Krzysztof Kozlowski]

On 11/03/2022 13:54, Ioana Ciornei wrote:
> Describe the "fsl,lynx-28g" compatible used by the Lynx 28G SerDes PHY
> driver on Layerscape based SoCs.
> 
> Signed-off-by: Ioana Ciornei <ioana.ciornei at nxp.com>
> ---
> Changes in v2:
> 	- none
> Changes in v3:
> 	- 2/8: fix 'make dt_binding_check' errors
> Changes in v4:
> 	- 2/8: remove the lane DT nodes
> 
>  .../devicetree/bindings/phy/fsl,lynx-28g.yaml | 40 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 41 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml b/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml
> new file mode 100644
> index 000000000000..dd1adf7b3c05
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml
> @@ -0,0 +1,40 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/fsl,lynx-28g.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale Lynx 28G SerDes PHY binding
> +
> +maintainers:
> +  - Ioana Ciornei <ioana.ciornei at nxp.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - fsl,lynx-28g
> +
> +  reg:
> +    maxItems: 1
> +
> +  "#phy-cells":
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#phy-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    soc {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +      serdes_1: serdes_phy at 1ea0000 {

Comment from v3 still unresolved. Rest looks good.

Best regards,
Krzysztof