[PATCH net-next v2 2/8] dt-bindings: phy: add the "fsl, lynx-28g" compatible

[Rob Herring]

On Wed, 09 Mar 2022 19:27:42 +0200, Ioana Ciornei wrote:
> Describe the "fsl,lynx-28g" compatible used by the Lynx 28G SerDes PHY
> driver on Layerscape based SoCs.
> 
> Signed-off-by: Ioana Ciornei <ioana.ciornei at nxp.com>
> ---
> Changes in v2:
> 	- none
> 
>  .../devicetree/bindings/phy/fsl,lynx-28g.yaml | 71 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 72 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/fsl,lynx-28g.example.dt.yaml: example-0: serdes_phy at 1ea0000:reg:0: [0, 32112640, 0, 7728] is too long
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/fsl,lynx-28g.example.dt.yaml: serdes_phy at 1ea0000: #phy-cells:0:0: 0 was expected
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/fsl,lynx-28g.example.dt.yaml: serdes_phy at 1ea0000: '#address-cells', '#size-cells', 'phy at 0', 'phy at 1', 'phy at 2', 'phy at 3', 'phy at 4', 'phy at 5', 'phy at 6', 'phy at 7' do not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1603505

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.