[PATCH v4] phy: phy-can-transceiver: Add support for setting mux

[Aswath Govindraju]

On some boards, for routing CAN signals from controller to transceiver,
muxes might need to be set. Therefore, add support for setting the mux by
reading the mux-states property from the device tree node.

Signed-off-by: Aswath Govindraju <a-govindraju at ti.com>
---

Changes since v3:
- Rebased on top of the linux-next head
- Dependencies are now merged in linux next.
  84564481bc45 (mux: Add support for reading mux state from consumer DT node)
- Dropped bindings patch from the series since it has been
  picked up from the earlier version
  https://lore.kernel.org/all/YieG22mgIzsL7TMn@robh.at.kernel.org/

Changes since v2:
- Fixed the bindings removing the description about
  the arguments in mux-states property

Changes since v1:
- Fixed the description for mux-states property in bindings
  file
- appended declaration of variable ret in the end

 drivers/phy/Kconfig               |  1 +
 drivers/phy/phy-can-transceiver.c | 24 +++++++++++++++++++++++-
 2 files changed, 24 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 82b63e60c5a2..300b0f2b5f84 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -64,6 +64,7 @@ config USB_LGM_PHY
 config PHY_CAN_TRANSCEIVER
 	tristate "CAN transceiver PHY"
 	select GENERIC_PHY
+	select MULTIPLEXER
 	help
 	  This option enables support for CAN transceivers as a PHY. This
 	  driver provides function for putting the transceivers in various
diff --git a/drivers/phy/phy-can-transceiver.c b/drivers/phy/phy-can-transceiver.c
index 6f3fe37dee0e..95c6dbb52da7 100644
--- a/drivers/phy/phy-can-transceiver.c
+++ b/drivers/phy/phy-can-transceiver.c
@@ -10,6 +10,7 @@
 #include<linux/module.h>
 #include<linux/gpio.h>
 #include<linux/gpio/consumer.h>
+#include <linux/mux/consumer.h>
 
 struct can_transceiver_data {
 	u32 flags;
@@ -21,13 +22,22 @@ struct can_transceiver_phy {
 	struct phy *generic_phy;
 	struct gpio_desc *standby_gpio;
 	struct gpio_desc *enable_gpio;
+	struct mux_state *mux_state;
 };
 
 /* Power on function */
 static int can_transceiver_phy_power_on(struct phy *phy)
 {
 	struct can_transceiver_phy *can_transceiver_phy = phy_get_drvdata(phy);
-
+	int ret;
+
+	if (can_transceiver_phy->mux_state) {
+		ret = mux_state_select(can_transceiver_phy->mux_state);
+		if (ret) {
+			dev_err(&phy->dev, "Failed to select CAN mux: %d\n", ret);
+			return ret;
+		}
+	}
 	if (can_transceiver_phy->standby_gpio)
 		gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 0);
 	if (can_transceiver_phy->enable_gpio)
@@ -45,6 +55,8 @@ static int can_transceiver_phy_power_off(struct phy *phy)
 		gpiod_set_value_cansleep(can_transceiver_phy->standby_gpio, 1);
 	if (can_transceiver_phy->enable_gpio)
 		gpiod_set_value_cansleep(can_transceiver_phy->enable_gpio, 0);
+	if (can_transceiver_phy->mux_state)
+		mux_state_deselect(can_transceiver_phy->mux_state);
 
 	return 0;
 }
@@ -95,6 +107,16 @@ static int can_transceiver_phy_probe(struct platform_device *pdev)
 	match = of_match_node(can_transceiver_phy_ids, pdev->dev.of_node);
 	drvdata = match->data;
 
+	if (of_property_read_bool(dev->of_node, "mux-states")) {
+		struct mux_state *mux_state;
+
+		mux_state = devm_mux_state_get(dev, NULL);
+		if (IS_ERR(mux_state))
+			return dev_err_probe(&pdev->dev, PTR_ERR(mux_state),
+					     "failed to get mux\n");
+		can_transceiver_phy->mux_state = mux_state;
+	}
+
 	phy = devm_phy_create(dev, dev->of_node,
 			      &can_transceiver_phy_ops);
 	if (IS_ERR(phy)) {
-- 
2.17.1