[RFC v7 net-next 02/13] pinctrl: microchip-sgpio: allow sgpio driver to be used as a module

Colin Foster colin.foster at in-advantage.com
Sun Mar 6 18:11:57 PST 2022


As the commit message suggests, this simply adds the ability to select
SGPIO pinctrl as a module. This becomes more practical when the SGPIO
hardware exists on an external chip, controlled indirectly by I2C or SPI.
This commit enables that level of control.

Signed-off-by: Colin Foster <colin.foster at in-advantage.com>
Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli at gmail.com>
---
 drivers/pinctrl/Kconfig                   | 2 +-
 drivers/pinctrl/pinctrl-microchip-sgpio.c | 4 ++++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 1b367f423ceb..7ff00c560775 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -292,7 +292,7 @@ config PINCTRL_MCP23S08
 	  corresponding interrupt-controller.
 
 config PINCTRL_MICROCHIP_SGPIO
-	bool "Pinctrl driver for Microsemi/Microchip Serial GPIO"
+	tristate "Pinctrl driver for Microsemi/Microchip Serial GPIO"
 	depends on OF
 	depends on HAS_IOMEM
 	select GPIOLIB
diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c
index 639f1130e989..e8e47a6808e6 100644
--- a/drivers/pinctrl/pinctrl-microchip-sgpio.c
+++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c
@@ -913,6 +913,7 @@ static const struct of_device_id microchip_sgpio_gpio_of_match[] = {
 		/* sentinel */
 	}
 };
+MODULE_DEVICE_TABLE(of, microchip_sgpio_gpio_of_match);
 
 static struct platform_driver microchip_sgpio_pinctrl_driver = {
 	.driver = {
@@ -923,3 +924,6 @@ static struct platform_driver microchip_sgpio_pinctrl_driver = {
 	.probe = microchip_sgpio_probe,
 };
 builtin_platform_driver(microchip_sgpio_pinctrl_driver);
+
+MODULE_DESCRIPTION("Microchip SGPIO Pinctrl Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.25.1




More information about the linux-phy mailing list