[PATCH v1 9/9] mips: dts: lantiq: Update the RCU node to match the intel,rcu-gw binding

[Martin Blumenstingl]

Use the updated compatible string and also add the USB2 PHY child node.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
 arch/mips/boot/dts/lantiq/danube.dtsi | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/arch/mips/boot/dts/lantiq/danube.dtsi b/arch/mips/boot/dts/lantiq/danube.dtsi
index 510be63c8bdf..8ac806662083 100644
--- a/arch/mips/boot/dts/lantiq/danube.dtsi
+++ b/arch/mips/boot/dts/lantiq/danube.dtsi
@@ -57,8 +57,26 @@ cgu0: cgu at 103000 {
 		};
 
 		rcu0: rcu at 203000 {
-			compatible = "lantiq,rcu-xway";
+			compatible = "lantiq,danube-rcu", "simple-mfd", "syscon";
 			reg = <0x203000 0x1000>;
+			ranges = <0x0 0x203000 0x100>;
+			big-endian;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			#reset-cells = <3>;
+			intel,global-reset = <0x10 30 29>;
+
+			usb_phy: usb2-phy at 18 {
+				compatible = "lantiq,danube-usb2-phy";
+				reg = <0x18 4>;
+				status = "disabled";
+
+				resets = <&rcu0 0x10 4 4>;
+				reset-names = "ctrl";
+				#phy-cells = <0>;
+			};
 		};
 	};
 
-- 
2.36.1