[PATCH v9 0/2] phy: mediatek: Add PCIe PHY driver

[Jianjun Wang]

Hi Vinod,

Sorry to disturb you, would you mind taking a look at this patch?

Thanks.

On Wed, 2022-06-01 at 11:02 +0530, Vinod Koul wrote:
> On 01-06-22, 10:21, Jianjun Wang wrote:
> > Hello Maintainers,
> > 
> > Gentle ping for this patch series, if there is anything I can do to
> > get
> > these patches merged, please let me know.
> 
> Patience my friend patience. This was received very late in cycle and
> I
> will review after merge window closes..
> 
> 
> > 
> > Thanks.
> > 
> > On Fri, 2022-05-20 at 14:49 +0800, Jianjun Wang wrote:
> > > These series patches add support for PCIe PHY driver on MediaTek
> > > chipsets.
> > > 
> > > Changes in v9:
> > > 1. Check if the return value is -ENOMEM when reading efuse data
> > > fails.
> > > 
> > > Changes in v8:
> > > 1. Use "device_property_present()" to increase human readability;
> > > 2. Use "GPL" as recommended in commit bf7fbeeae6db ("module: Cure
> > >    the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity").
> > > 
> > > Changes in v7:
> > > 1. Add bitfield.h header to fix the build error on non-arm64
> > > platforms.
> > > 
> > > Changes in v6:
> > > 1. Remove unnecessary header files;
> > > 2. Use FILELD_PREP in bitfield.h to set value.
> > > 
> > > Changes in v5:
> > > 1. Fix typo in kerneldoc: "eFues" => "eFuse".
> > > 
> > > Changes in v4:
> > > 1. Fix no return when calling dev_err_probe.
> > > 
> > > Changes in v3:
> > > 1. Add introductions for structure members;
> > > 2. Add SoC dependent data;
> > > 3. Dynamically allocate efuse data;
> > > 4. Check return value if it's an -EPROBE_DEFER.
> > > 
> > > Changes in v2:
> > > 1. Add specific compatible name;
> > > 2. Read NVMEM data at probe time;
> > > 3. Fix typos.
> > > 
> > > Jianjun Wang (2):
> > >   dt-bindings: phy: mediatek: Add YAML schema for PCIe PHY
> > >   phy: mediatek: Add PCIe PHY driver
> > > 
> > >  .../bindings/phy/mediatek,pcie-phy.yaml       |  75 +++++
> > >  drivers/phy/mediatek/Kconfig                  |  11 +
> > >  drivers/phy/mediatek/Makefile                 |   1 +
> > >  drivers/phy/mediatek/phy-mtk-pcie.c           | 267
> > > ++++++++++++++++++
> > >  4 files changed, 354 insertions(+)
> > >  create mode 100644
> > > Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml
> > >  create mode 100644 drivers/phy/mediatek/phy-mtk-pcie.c
> > > 
> 
>