[PATCH v1 1/1] phy: ti: tusb1210: Don't check for write errors when powering on

[Ferry Toth]

Op 13-06-2022 om 22:40 schreef Ferry Toth:
> Hi
> 
> Op 13-06-2022 om 18:08 schreef Andy Shevchenko:
>> On some platforms, like Intel Merrifield, the writing values during 
>> power on
>> may timeout:
>>
>>     tusb1210 dwc3.0.auto.ulpi: error -110 writing val 0x41 to reg 0x80
> with the patch this error continues to appear in the logs
>>     phy phy-dwc3.0.auto.ulpi.0: phy poweron failed --> -110
>>     dwc3 dwc3.0.auto: error -ETIMEDOUT: failed to initialize core
>>     dwc3: probe of dwc3.0.auto failed with error -110
> these errors are gone
>> which effectively fails the probe of the USB controller.
> 
> and probe of dwc3 succeeds
> 
> Tested on Intel Edison (Merrifield)

Tested-by: Ferry Toth <fntoth at gmail.com>

>> Drop the check as it was before the culprit commit (see Fixes tag).
>>
>> Fixes: 09a3512681b3 ("phy: ti: tusb1210: Improve ulpi_read()/_write() 
>> error checking")
>> Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
>> ---
>>   drivers/phy/ti/phy-tusb1210.c | 5 +++--
>>   1 file changed, 3 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/phy/ti/phy-tusb1210.c 
>> b/drivers/phy/ti/phy-tusb1210.c
>> index c3ab4b69ea68..669c13d6e402 100644
>> --- a/drivers/phy/ti/phy-tusb1210.c
>> +++ b/drivers/phy/ti/phy-tusb1210.c
>> @@ -105,8 +105,9 @@ static int tusb1210_power_on(struct phy *phy)
>>       msleep(TUSB1210_RESET_TIME_MS);
>>       /* Restore the optional eye diagram optimization value */
>> -    return tusb1210_ulpi_write(tusb, TUSB1210_VENDOR_SPECIFIC2,
>> -                   tusb->vendor_specific2);
>> +    tusb1210_ulpi_write(tusb, TUSB1210_VENDOR_SPECIFIC2, 
>> tusb->vendor_specific2);
>> +
>> +    return 0;
>>   }
>>   static int tusb1210_power_off(struct phy *phy)