[RFC PATCH 03/28] phy: qcom-qmp-combo,usb: add support for separate PCS_USB region
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Fri Jun 10 12:09:00 PDT 2022
Different QMP USB PHYs might have different offset from PCS to PCS_USB
register space, but the same PCS_USB register layout. Add separate
PCS_USB region space and merge related PCS_USB definitions.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 47 +++++++--
drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 118 ++++++++++++++--------
drivers/phy/qualcomm/phy-qcom-qmp.h | 106 +++++++++----------
3 files changed, 163 insertions(+), 108 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 893b5a4bb554..fd7a9c25f27d 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -155,8 +155,10 @@ static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_START_CTRL] = 0x44,
[QPHY_PCS_STATUS] = 0x14,
[QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
- [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x308,
- [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x314,
+
+ /* In PCS_USB */
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x008,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x014,
};
static const struct qmp_phy_init_tbl qmp_v3_usb3_serdes_tbl[] = {
@@ -451,6 +453,9 @@ static const struct qmp_phy_init_tbl sm8150_usb3_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_pcs_usb_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
};
@@ -520,6 +525,9 @@ static const struct qmp_phy_init_tbl sm8250_usb3_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_pcs_usb_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
};
@@ -622,6 +630,8 @@ struct qmp_phy_cfg {
int rx_tbl_num;
const struct qmp_phy_init_tbl *pcs_tbl;
int pcs_tbl_num;
+ const struct qmp_phy_init_tbl *pcs_usb_tbl;
+ int pcs_usb_tbl_num;
/* Init sequence for DP PHY block link rates */
const struct qmp_phy_init_tbl *serdes_tbl_rbr;
@@ -667,6 +677,10 @@ struct qmp_phy_cfg {
bool has_phy_dp_com_ctrl;
/* true, if PHY has secondary tx/rx lanes to be configured */
bool is_dual_lane_phy;
+
+ /* Offset from PCS to PCS_USB region */
+ unsigned int pcs_usb_offset;
+
};
struct qmp_phy_combo_cfg {
@@ -686,6 +700,7 @@ struct qmp_phy_combo_cfg {
* @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
* @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
* @pcs_misc: iomapped memory space for lane's pcs_misc
+ * @pcs_usb: iomapped memory space for lane's pcs_usb
* @pipe_clk: pipe clock
* @index: lane index
* @qmp: QMP phy to which this lane belongs
@@ -705,6 +720,7 @@ struct qmp_phy {
void __iomem *tx2;
void __iomem *rx2;
void __iomem *pcs_misc;
+ void __iomem *pcs_usb;
struct clk *pipe_clk;
unsigned int index;
struct qcom_qmp *qmp;
@@ -898,6 +914,8 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
.rx_tbl_num = ARRAY_SIZE(sm8150_usb3_rx_tbl),
.pcs_tbl = sm8150_usb3_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
+ .pcs_usb_tbl = sm8150_usb3_pcs_usb_tbl,
+ .pcs_usb_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_usb_tbl),
.clk_list = qmp_v4_phy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
@@ -905,6 +923,7 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v4_usb3phy_regs_layout,
+ .pcs_usb_offset = 0x300,
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
@@ -971,6 +990,8 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
.rx_tbl_num = ARRAY_SIZE(sm8250_usb3_rx_tbl),
.pcs_tbl = sm8250_usb3_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl),
+ .pcs_usb_tbl = sm8250_usb3_pcs_usb_tbl,
+ .pcs_usb_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_usb_tbl),
.clk_list = qmp_v4_sm8250_usbphy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
@@ -978,6 +999,7 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v4_usb3phy_regs_layout,
+ .pcs_usb_offset = 0x300,
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
@@ -1862,7 +1884,7 @@ static int qcom_qmp_phy_combo_set_mode(struct phy *phy,
static void qcom_qmp_phy_combo_enable_autonomous_mode(struct qmp_phy *qphy)
{
const struct qmp_phy_cfg *cfg = qphy->cfg;
- void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_usb = qphy->pcs_usb ?: qphy->pcs;
void __iomem *pcs_misc = qphy->pcs_misc;
u32 intr_mask;
@@ -1873,15 +1895,15 @@ static void qcom_qmp_phy_combo_enable_autonomous_mode(struct qmp_phy *qphy)
intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
/* Clear any pending interrupts status */
- qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+ qphy_setbits(pcs_usb, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
/* Writing 1 followed by 0 clears the interrupt */
- qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+ qphy_clrbits(pcs_usb, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
- qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+ qphy_clrbits(pcs_usb, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
ARCVR_DTCT_EN | ALFPS_DTCT_EN | ARCVR_DTCT_EVENT_SEL);
/* Enable required PHY autonomous mode interrupts */
- qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
+ qphy_setbits(pcs_usb, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
/* Enable i/o clamp_n for autonomous mode */
if (pcs_misc)
@@ -1891,19 +1913,19 @@ static void qcom_qmp_phy_combo_enable_autonomous_mode(struct qmp_phy *qphy)
static void qcom_qmp_phy_combo_disable_autonomous_mode(struct qmp_phy *qphy)
{
const struct qmp_phy_cfg *cfg = qphy->cfg;
- void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_usb = qphy->pcs_usb ?: qphy->pcs_usb;
void __iomem *pcs_misc = qphy->pcs_misc;
/* Disable i/o clamp_n on resume for normal mode */
if (pcs_misc)
qphy_setbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
- qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+ qphy_clrbits(pcs_usb, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN);
- qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+ qphy_setbits(pcs_usb, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
/* Writing 1 followed by 0 clears the interrupt */
- qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+ qphy_clrbits(pcs_usb, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
}
static int __maybe_unused qcom_qmp_phy_combo_runtime_suspend(struct device *dev)
@@ -2323,6 +2345,9 @@ int qcom_qmp_phy_combo_create(struct device *dev, struct device_node *np, int id
if (!qphy->pcs)
return -ENOMEM;
+ if (cfg->pcs_usb_offset)
+ qphy->pcs_usb = qphy->pcs + cfg->pcs_usb_offset;
+
/*
* If this is a dual-lane PHY, then there should be registers for the
* second lane. Some old device trees did not specify this, so fall
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index aebe5ed4e4e3..b1f2f825bd21 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -169,26 +169,10 @@ static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_START_CTRL] = 0x44,
[QPHY_PCS_STATUS] = 0x14,
[QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
- [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x308,
- [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x314,
-};
-static const unsigned int qmp_v4_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
- [QPHY_SW_RESET] = 0x00,
- [QPHY_START_CTRL] = 0x44,
- [QPHY_PCS_STATUS] = 0x14,
- [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
- [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x608,
- [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x614,
-};
-
-static const unsigned int sm8350_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
- [QPHY_SW_RESET] = 0x00,
- [QPHY_START_CTRL] = 0x44,
- [QPHY_PCS_STATUS] = 0x14,
- [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
- [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x1008,
- [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x1014,
+ /* In PCS_USB */
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x008,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x014,
};
static const unsigned int qcm2290_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
@@ -777,6 +761,9 @@ static const struct qmp_phy_init_tbl sm8150_usb3_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_pcs_usb_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
};
@@ -878,8 +865,6 @@ static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
- QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
- QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0f),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
@@ -889,6 +874,11 @@ static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
};
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_pcs_usb_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
static const struct qmp_phy_init_tbl sm8250_usb3_tx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x60),
QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x60),
@@ -954,6 +944,9 @@ static const struct qmp_phy_init_tbl sm8250_usb3_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_pcs_usb_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
};
@@ -1015,8 +1008,6 @@ static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
- QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
- QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
@@ -1025,6 +1016,11 @@ static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
};
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_usb_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+};
+
static const struct qmp_phy_init_tbl sdx55_usb3_uniphy_tx_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
@@ -1171,8 +1167,6 @@ static const struct qmp_phy_init_tbl sm8350_usb3_rx_tbl[] = {
};
static const struct qmp_phy_init_tbl sm8350_usb3_pcs_tbl[] = {
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
@@ -1187,6 +1181,11 @@ static const struct qmp_phy_init_tbl sm8350_usb3_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8350_usb3_pcs_usb_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
};
@@ -1244,8 +1243,6 @@ static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
- QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
@@ -1254,6 +1251,11 @@ static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
};
+static const struct qmp_phy_init_tbl sm8350_usb3_uniphy_pcs_usb_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+};
+
static const struct qmp_phy_init_tbl qcm2290_usb3_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14),
QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
@@ -1365,6 +1367,8 @@ struct qmp_phy_cfg {
int rx_tbl_num;
const struct qmp_phy_init_tbl *pcs_tbl;
int pcs_tbl_num;
+ const struct qmp_phy_init_tbl *pcs_usb_tbl;
+ int pcs_usb_tbl_num;
/* clock ids to be requested */
const char * const *clk_list;
@@ -1394,6 +1398,9 @@ struct qmp_phy_cfg {
bool has_phy_dp_com_ctrl;
/* true, if PHY has secondary tx/rx lanes to be configured */
bool is_dual_lane_phy;
+
+ /* Offset from PCS to PCS_USB region */
+ unsigned int pcs_usb_offset;
};
/**
@@ -1408,6 +1415,7 @@ struct qmp_phy_cfg {
* @tx2: iomapped memory space for second lane's tx (in dual lane PHYs)
* @rx2: iomapped memory space for second lane's rx (in dual lane PHYs)
* @pcs_misc: iomapped memory space for lane's pcs_misc
+ * @pcs_usb: iomapped memory space for lane's pcs_usb
* @pipe_clk: pipe clock
* @index: lane index
* @qmp: QMP phy to which this lane belongs
@@ -1423,6 +1431,7 @@ struct qmp_phy {
void __iomem *tx2;
void __iomem *rx2;
void __iomem *pcs_misc;
+ void __iomem *pcs_usb;
struct clk *pipe_clk;
unsigned int index;
struct qcom_qmp *qmp;
@@ -1703,6 +1712,8 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
.rx_tbl_num = ARRAY_SIZE(sm8150_usb3_rx_tbl),
.pcs_tbl = sm8150_usb3_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
+ .pcs_usb_tbl = sm8150_usb3_pcs_usb_tbl,
+ .pcs_usb_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_usb_tbl),
.clk_list = qmp_v4_phy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
@@ -1710,6 +1721,7 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v4_usb3phy_regs_layout,
+ .pcs_usb_offset = 0x300,
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
@@ -1736,13 +1748,16 @@ static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
.rx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_rx_tbl),
.pcs_tbl = sm8150_usb3_uniphy_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_pcs_tbl),
+ .pcs_usb_tbl = sm8150_usb3_uniphy_pcs_usb_tbl,
+ .pcs_usb_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_pcs_usb_tbl),
.clk_list = qmp_v4_phy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v4_usb3_uniphy_regs_layout,
+ .regs = qmp_v4_usb3phy_regs_layout,
+ .pcs_usb_offset = 0x600,
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
@@ -1765,6 +1780,8 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
.rx_tbl_num = ARRAY_SIZE(sm8250_usb3_rx_tbl),
.pcs_tbl = sm8250_usb3_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl),
+ .pcs_usb_tbl = sm8250_usb3_pcs_usb_tbl,
+ .pcs_usb_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_usb_tbl),
.clk_list = qmp_v4_sm8250_usbphy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
@@ -1772,6 +1789,7 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v4_usb3phy_regs_layout,
+ .pcs_usb_offset = 0x300,
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
@@ -1797,13 +1815,16 @@ static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
.rx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_rx_tbl),
.pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
+ .pcs_usb_tbl = sm8250_usb3_uniphy_pcs_usb_tbl,
+ .pcs_usb_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_usb_tbl),
.clk_list = qmp_v4_phy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v4_usb3_uniphy_regs_layout,
+ .regs = qmp_v4_usb3phy_regs_layout,
+ .pcs_usb_offset = 0x600,
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
@@ -1826,13 +1847,16 @@ static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = {
.rx_tbl_num = ARRAY_SIZE(sdx55_usb3_uniphy_rx_tbl),
.pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
+ .pcs_usb_tbl = sm8250_usb3_uniphy_pcs_usb_tbl,
+ .pcs_usb_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_usb_tbl),
.clk_list = qmp_v4_sdx55_usbphy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v4_usb3_uniphy_regs_layout,
+ .regs = qmp_v4_usb3phy_regs_layout,
+ .pcs_usb_offset = 0x600,
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
@@ -1855,13 +1879,16 @@ static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = {
.rx_tbl_num = ARRAY_SIZE(sdx65_usb3_uniphy_rx_tbl),
.pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
+ .pcs_usb_tbl = sm8350_usb3_uniphy_pcs_usb_tbl,
+ .pcs_usb_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_usb_tbl),
.clk_list = qmp_v4_sdx55_usbphy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_sdx55_usbphy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = sm8350_usb3_uniphy_regs_layout,
+ .regs = qmp_v4_usb3phy_regs_layout,
+ .pcs_usb_offset = 0x1000,
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
@@ -1884,6 +1911,8 @@ static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
.rx_tbl_num = ARRAY_SIZE(sm8350_usb3_rx_tbl),
.pcs_tbl = sm8350_usb3_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_pcs_tbl),
+ .pcs_usb_tbl = sm8350_usb3_pcs_usb_tbl,
+ .pcs_usb_tbl_num = ARRAY_SIZE(sm8350_usb3_pcs_usb_tbl),
.clk_list = qmp_v4_sm8250_usbphy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
@@ -1891,6 +1920,7 @@ static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v4_usb3phy_regs_layout,
+ .pcs_usb_offset = 0x300,
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
@@ -1916,13 +1946,16 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = {
.rx_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_rx_tbl),
.pcs_tbl = sm8350_usb3_uniphy_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_tbl),
+ .pcs_usb_tbl = sm8350_usb3_uniphy_pcs_usb_tbl,
+ .pcs_usb_tbl_num = ARRAY_SIZE(sm8350_usb3_uniphy_pcs_usb_tbl),
.clk_list = qmp_v4_phy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
.num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = sm8350_usb3_uniphy_regs_layout,
+ .regs = qmp_v4_usb3phy_regs_layout,
+ .pcs_usb_offset = 0x1000,
.start_ctrl = SERDES_START | PCS_START,
.pwrdn_ctrl = SW_PWRDN,
@@ -2244,7 +2277,7 @@ static int qcom_qmp_phy_usb_set_mode(struct phy *phy,
static void qcom_qmp_phy_usb_enable_autonomous_mode(struct qmp_phy *qphy)
{
const struct qmp_phy_cfg *cfg = qphy->cfg;
- void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_usb = qphy->pcs_usb ?: qphy->pcs;
void __iomem *pcs_misc = qphy->pcs_misc;
u32 intr_mask;
@@ -2255,15 +2288,15 @@ static void qcom_qmp_phy_usb_enable_autonomous_mode(struct qmp_phy *qphy)
intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
/* Clear any pending interrupts status */
- qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+ qphy_setbits(pcs_usb, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
/* Writing 1 followed by 0 clears the interrupt */
- qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+ qphy_clrbits(pcs_usb, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
- qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+ qphy_clrbits(pcs_usb, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
ARCVR_DTCT_EN | ALFPS_DTCT_EN | ARCVR_DTCT_EVENT_SEL);
/* Enable required PHY autonomous mode interrupts */
- qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
+ qphy_setbits(pcs_usb, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
/* Enable i/o clamp_n for autonomous mode */
if (pcs_misc)
@@ -2273,19 +2306,19 @@ static void qcom_qmp_phy_usb_enable_autonomous_mode(struct qmp_phy *qphy)
static void qcom_qmp_phy_usb_disable_autonomous_mode(struct qmp_phy *qphy)
{
const struct qmp_phy_cfg *cfg = qphy->cfg;
- void __iomem *pcs = qphy->pcs;
+ void __iomem *pcs_usb = qphy->pcs_usb ?: qphy->pcs;
void __iomem *pcs_misc = qphy->pcs_misc;
/* Disable i/o clamp_n on resume for normal mode */
if (pcs_misc)
qphy_setbits(pcs_misc, QPHY_V3_PCS_MISC_CLAMP_ENABLE, CLAMP_EN);
- qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
+ qphy_clrbits(pcs_usb, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN);
- qphy_setbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+ qphy_setbits(pcs_usb, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
/* Writing 1 followed by 0 clears the interrupt */
- qphy_clrbits(pcs, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
+ qphy_clrbits(pcs_usb, cfg->regs[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR], IRQ_CLEAR);
}
static int __maybe_unused qcom_qmp_phy_usb_runtime_suspend(struct device *dev)
@@ -2501,6 +2534,9 @@ int qcom_qmp_phy_usb_create(struct device *dev, struct device_node *np, int id,
if (!qphy->pcs)
return -ENOMEM;
+ if (cfg->pcs_usb_offset)
+ qphy->pcs_usb = qphy->pcs + cfg->pcs_usb_offset;
+
/*
* If this is a dual-lane PHY, then there should be registers for the
* second lane. Some old device trees did not specify this, so fall
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 581f09c71667..c07227f352b3 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -1006,29 +1006,31 @@
#define QPHY_V4_PCS_EQ_CONFIG3 0x1e4
#define QPHY_V4_PCS_EQ_CONFIG4 0x1e8
#define QPHY_V4_PCS_EQ_CONFIG5 0x1ec
-#define QPHY_V4_PCS_USB3_POWER_STATE_CONFIG1 0x300
-#define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_STATUS 0x304
-#define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_CTRL 0x308
-#define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_CTRL2 0x30c
-#define QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_SOURCE_STATUS 0x310
-#define QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR 0x314
-#define QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x318
-#define QPHY_V4_PCS_USB3_LFPS_TX_ECSTART 0x31c
-#define QPHY_V4_PCS_USB3_LFPS_PER_TIMER_VAL 0x320
-#define QPHY_V4_PCS_USB3_LFPS_TX_END_CNT_U3_START 0x324
-#define QPHY_V4_PCS_USB3_RXEQTRAINING_LOCK_TIME 0x328
-#define QPHY_V4_PCS_USB3_RXEQTRAINING_WAIT_TIME 0x32c
-#define QPHY_V4_PCS_USB3_RXEQTRAINING_CTLE_TIME 0x330
-#define QPHY_V4_PCS_USB3_RXEQTRAINING_WAIT_TIME_S2 0x334
-#define QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x338
-#define QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x33c
-#define QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_H 0x340
-#define QPHY_V4_PCS_USB3_ARCVR_DTCT_EN_PERIOD 0x344
-#define QPHY_V4_PCS_USB3_ARCVR_DTCT_CM_DLY 0x348
-#define QPHY_V4_PCS_USB3_TXONESZEROS_RUN_LENGTH 0x34c
-#define QPHY_V4_PCS_USB3_ALFPS_DEGLITCH_VAL 0x350
-#define QPHY_V4_PCS_USB3_SIGDET_STARTUP_TIMER_VAL 0x354
-#define QPHY_V4_PCS_USB3_TEST_CONTROL 0x358
+
+/* Only for QMP V4 PHY - USB3 PCS registers */
+#define QPHY_V4_PCS_USB3_POWER_STATE_CONFIG1 0x000
+#define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_STATUS 0x004
+#define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_CTRL 0x008
+#define QPHY_V4_PCS_USB3_AUTONOMOUS_MODE_CTRL2 0x00c
+#define QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_SOURCE_STATUS 0x010
+#define QPHY_V4_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR 0x014
+#define QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x018
+#define QPHY_V4_PCS_USB3_LFPS_TX_ECSTART 0x01c
+#define QPHY_V4_PCS_USB3_LFPS_PER_TIMER_VAL 0x020
+#define QPHY_V4_PCS_USB3_LFPS_TX_END_CNT_U3_START 0x024
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_LOCK_TIME 0x028
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_WAIT_TIME 0x02c
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_CTLE_TIME 0x030
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_WAIT_TIME_S2 0x034
+#define QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x038
+#define QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x03c
+#define QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_H 0x040
+#define QPHY_V4_PCS_USB3_ARCVR_DTCT_EN_PERIOD 0x044
+#define QPHY_V4_PCS_USB3_ARCVR_DTCT_CM_DLY 0x048
+#define QPHY_V4_PCS_USB3_TXONESZEROS_RUN_LENGTH 0x04c
+#define QPHY_V4_PCS_USB3_ALFPS_DEGLITCH_VAL 0x050
+#define QPHY_V4_PCS_USB3_SIGDET_STARTUP_TIMER_VAL 0x054
+#define QPHY_V4_PCS_USB3_TEST_CONTROL 0x058
/* Only for QMP V4_20 PHY - USB/PCIe PCS registers */
#define QPHY_V4_20_PCS_RX_SIGDET_LVL 0x188
@@ -1036,10 +1038,6 @@
#define QPHY_V4_20_PCS_EQ_CONFIG4 0x1e0
#define QPHY_V4_20_PCS_EQ_CONFIG5 0x1e4
-/* Only for QMP V4 PHY - UNI has 0x300 offset for PCS_USB3 regs */
-#define QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL 0x618
-#define QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2 0x638
-
/* Only for QMP V4 PHY - PCS_MISC registers */
#define QPHY_V4_PCS_MISC_TYPEC_CTRL 0x00
#define QPHY_V4_PCS_MISC_TYPEC_PWRDN_CTRL 0x04
@@ -1290,34 +1288,30 @@
#define QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1 0x1e0
/* Only for QMP V5 PHY - USB3 have different offsets than V4 */
-#define QPHY_V5_PCS_USB3_POWER_STATE_CONFIG1 0x300
-#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_STATUS 0x304
-#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL 0x308
-#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL2 0x30c
-#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_SOURCE_STATUS 0x310
-#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR 0x314
-#define QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x318
-#define QPHY_V5_PCS_USB3_LFPS_TX_ECSTART 0x31c
-#define QPHY_V5_PCS_USB3_LFPS_PER_TIMER_VAL 0x320
-#define QPHY_V5_PCS_USB3_LFPS_TX_END_CNT_U3_START 0x324
-#define QPHY_V5_PCS_USB3_LFPS_CONFIG1 0x328
-#define QPHY_V5_PCS_USB3_RXEQTRAINING_LOCK_TIME 0x32c
-#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME 0x330
-#define QPHY_V5_PCS_USB3_RXEQTRAINING_CTLE_TIME 0x334
-#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME_S2 0x338
-#define QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x33c
-#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x340
-#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H 0x344
-#define QPHY_V5_PCS_USB3_ARCVR_DTCT_EN_PERIOD 0x348
-#define QPHY_V5_PCS_USB3_ARCVR_DTCT_CM_DLY 0x34c
-#define QPHY_V5_PCS_USB3_TXONESZEROS_RUN_LENGTH 0x350
-#define QPHY_V5_PCS_USB3_ALFPS_DEGLITCH_VAL 0x354
-#define QPHY_V5_PCS_USB3_SIGDET_STARTUP_TIMER_VAL 0x358
-#define QPHY_V5_PCS_USB3_TEST_CONTROL 0x35c
-#define QPHY_V5_PCS_USB3_RXTERMINATION_DLY_SEL 0x360
-
-/* Only for QMP V5 PHY - UNI has 0x1000 offset for PCS_USB3 regs */
-#define QPHY_V5_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL 0x1018
-#define QPHY_V5_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2 0x103c
+#define QPHY_V5_PCS_USB3_POWER_STATE_CONFIG1 0x000
+#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_STATUS 0x004
+#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL 0x008
+#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL2 0x00c
+#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_SOURCE_STATUS 0x010
+#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR 0x014
+#define QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL 0x018
+#define QPHY_V5_PCS_USB3_LFPS_TX_ECSTART 0x01c
+#define QPHY_V5_PCS_USB3_LFPS_PER_TIMER_VAL 0x020
+#define QPHY_V5_PCS_USB3_LFPS_TX_END_CNT_U3_START 0x024
+#define QPHY_V5_PCS_USB3_LFPS_CONFIG1 0x028
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_LOCK_TIME 0x02c
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME 0x030
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_CTLE_TIME 0x034
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME_S2 0x038
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2 0x03c
+#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L 0x040
+#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H 0x044
+#define QPHY_V5_PCS_USB3_ARCVR_DTCT_EN_PERIOD 0x048
+#define QPHY_V5_PCS_USB3_ARCVR_DTCT_CM_DLY 0x04c
+#define QPHY_V5_PCS_USB3_TXONESZEROS_RUN_LENGTH 0x050
+#define QPHY_V5_PCS_USB3_ALFPS_DEGLITCH_VAL 0x054
+#define QPHY_V5_PCS_USB3_SIGDET_STARTUP_TIMER_VAL 0x058
+#define QPHY_V5_PCS_USB3_TEST_CONTROL 0x05c
+#define QPHY_V5_PCS_USB3_RXTERMINATION_DLY_SEL 0x060
#endif
--
2.35.1
More information about the linux-phy
mailing list