[PATCH 04/23] dt-bindings: reset: update st,stih407-powerdown.yaml references

[Mauro Carvalho Chehab]

Changeset 2ca065dc9468 ("dt-bindings: reset: st,sti-powerdown: Convert to yaml")
renamed: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
to: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml.

Update the cross-references accordingly.

Fixes: 2ca065dc9468 ("dt-bindings: reset: st,sti-powerdown: Convert to yaml")
Signed-off-by: Mauro Carvalho Chehab <mchehab at kernel.org>
---

To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover.
See [PATCH 00/23] at: https://lore.kernel.org/all/cover.1654529011.git.mchehab@kernel.org/

 Documentation/devicetree/bindings/phy/phy-stih407-usb.txt | 2 +-
 Documentation/devicetree/bindings/usb/dwc3-st.txt         | 2 +-
 Documentation/devicetree/bindings/usb/ehci-st.txt         | 2 +-
 Documentation/devicetree/bindings/usb/ohci-st.txt         | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
index de6a706abcdb..35f03df00130 100644
--- a/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
+++ b/Documentation/devicetree/bindings/phy/phy-stih407-usb.txt
@@ -9,7 +9,7 @@ Required properties:
 - resets		: list of phandle and reset specifier pairs. There should be two entries, one
 			  for the whole phy and one for the port
 - reset-names		: list of reset signal names. Should be "global" and "port"
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
 See: Documentation/devicetree/bindings/reset/reset.txt
 
 Example:
diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt
index bf73de0d5b4a..4aa368447b1e 100644
--- a/Documentation/devicetree/bindings/usb/dwc3-st.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt
@@ -13,7 +13,7 @@ Required properties:
  - resets	: list of phandle and reset specifier pairs. There should be two entries, one
 		  for the powerdown and softreset lines of the usb3 IP
  - reset-names	: list of reset signal names. Names should be "powerdown" and "softreset"
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
 See: Documentation/devicetree/bindings/reset/reset.txt
 
  - #address-cells, #size-cells : should be '1' if the device has sub-nodes
diff --git a/Documentation/devicetree/bindings/usb/ehci-st.txt b/Documentation/devicetree/bindings/usb/ehci-st.txt
index 065c91d955ad..d6f2bdee20fc 100644
--- a/Documentation/devicetree/bindings/usb/ehci-st.txt
+++ b/Documentation/devicetree/bindings/usb/ehci-st.txt
@@ -17,7 +17,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
  - resets		: phandle + reset specifier pairs to the powerdown and softreset lines
 			  of the USB IP
  - reset-names		: should be "power" and "softreset"
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
 See: Documentation/devicetree/bindings/reset/reset.txt
 
 Example:
diff --git a/Documentation/devicetree/bindings/usb/ohci-st.txt b/Documentation/devicetree/bindings/usb/ohci-st.txt
index 44c998c16f85..1c735573abc0 100644
--- a/Documentation/devicetree/bindings/usb/ohci-st.txt
+++ b/Documentation/devicetree/bindings/usb/ohci-st.txt
@@ -15,7 +15,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
 
  - resets		: phandle to the powerdown and reset controller for the USB IP
  - reset-names		: should be "power" and "softreset".
-See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/st,stih407-powerdown.yaml
 See: Documentation/devicetree/bindings/reset/reset.txt
 
 Example:
-- 
2.36.1