[PATCH v2 3/5] PCI: axis: Add ARTPEC-8 PCIe controller driver
Bjorn Helgaas
helgaas at kernel.org
Fri Jun 3 09:03:14 PDT 2022
In the subject, why do you tag this "axis"? There's an existing
pcie-artpec6.c that uses the driver name ""artpec6-pcie" and the
subject line tag "artpec6".
This adds pcie-artpec8.c with driver name "artpec8-pcie", so the
obvious choice would be "artpec8".
I assume you evaluated the possibility of extending artpec6 to support
artpec8 in addition to the artpec6 and artpec7 it already supports?
On Fri, Jun 03, 2022 at 11:34:52AM +0900, Wangseok Lee wrote:
> Add support Axis, ARTPEC-8 SoC.
> ARTPEC-8 is the SoC platform of Axis Communications.
> This is based on arm64 and support GEN4 & 2lane.
> This PCIe controller is based on DesignWare Hardware core
> and uses DesignWare core functions to implement the driver.
Add blank lines between paragraphs.
Wrap lines to fill 75 columns.
> changes since v1 :
> improvement review comment of Krzysztof on driver code.
> -debug messages for probe or other functions.
> -Inconsistent coding style (different indentation in structure members).
> -Inconsistent code (artpec8_pcie_get_subsystem_resources() gets device
> from pdev and from pci so you have two same pointers;
> or artpec8_pcie_get_ep_mem_resources() stores dev
> as local variable but uses instead pdev->dev).
> -Not using devm_platform_ioremap_resource().
> -Printing messages in interrupt handlers.
> -Several local/static structures or array are not const.
Thanks for the "changes since v1" notes. You can put them below the
"---" since there's no need for them in the permanent git commit log:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/process/submitting-patches.rst?id=v5.18#n675
> Signed-off-by: Wangseok Lee <wangseok.lee at samsung.com>
Why is there no signoff from Jaeho Cho <jaeho79.cho at samsung.com>?
> ---
> drivers/pci/controller/dwc/Kconfig | 31 ++
> drivers/pci/controller/dwc/Makefile | 1 +
> drivers/pci/controller/dwc/pcie-artpec8.c | 864 ++++++++++++++++++++++++++++++
> 3 files changed, 896 insertions(+)
> create mode 100644 drivers/pci/controller/dwc/pcie-artpec8.c
>
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index 62ce3ab..4aa6da8 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -222,6 +222,37 @@ config PCIE_ARTPEC6_EP
> Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
> endpoint mode. This uses the DesignWare core.
>
> +config PCIE_ARTPEC8
> + bool "Axis ARTPEC-8 PCIe controller"
> +
> +config PCIE_ARTPEC8_HOST
> + bool "Axis ARTPEC-8 PCIe controller Host Mode"
> + depends on ARCH_ARTPEC
> + depends on PCI_MSI_IRQ_DOMAIN
> + depends on PCI_ENDPOINT
> + select PCI_EPF_TEST
> + select PCIE_DW_HOST
> + select PCIE_ARTPEC8
> + help
> + Say 'Y' here to enable support for the PCIe controller in the
> + ARTPEC-8 SoC to work in host mode.
> + This PCIe controller is based on DesignWare Hardware core.
> + And uses DesignWare core functions to implement the driver.
Add blank line between paragraphs or rewrap as a single paragraph.
s/Hardware/hardware/
The last two sentences should be combined since the latter has no
verb:
This PCIe controller is based on the DesignWare hardware core and
uses DesignWare core functions to implement the driver.
> +config PCIE_ARTPEC8_EP
> + bool "Axis ARTPEC-8 PCIe controller Endpoint Mode"
> + depends on ARCH_ARTPEC
> + depends on PCI_ENDPOINT
> + depends on PCI_ENDPOINT_CONFIGFS
> + select PCI_EPF_TEST
> + select PCIE_DW_EP
> + select PCIE_ARTPEC8
> + help
> + Say 'Y' here to enable support for the PCIe controller in the
> + ARTPEC-8 SoC to work in endpoint mode.
> + This PCIe controller is based on DesignWare Hardware core.
> + And uses DesignWare core functions to implement the driver.
Same.
> config PCIE_ROCKCHIP_DW_HOST
> bool "Rockchip DesignWare PCIe controller"
> select PCIE_DW
> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> index 8ba7b67..b361022 100644
> --- a/drivers/pci/controller/dwc/Makefile
> +++ b/drivers/pci/controller/dwc/Makefile
> @@ -25,6 +25,7 @@ obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
> obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
> obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
> obj-$(CONFIG_PCIE_VISCONTI_HOST) += pcie-visconti.o
> +obj-$(CONFIG_PCIE_ARTPEC8) += pcie-artpec8.o
>
> # The following drivers are for devices that use the generic ACPI
> # pci_root.c driver but don't support standard ECAM config access.
> diff --git a/drivers/pci/controller/dwc/pcie-artpec8.c b/drivers/pci/controller/dwc/pcie-artpec8.c
> new file mode 100644
> index 0000000..d9ae9bf
> --- /dev/null
> +++ b/drivers/pci/controller/dwc/pcie-artpec8.c
> @@ -0,0 +1,864 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * PCIe controller driver for Axis ARTPEC-8 SoC
> + *
> + * Copyright (C) 2019 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * Author: Jaeho Cho <jaeho79.cho at samsung.com>
> + * This file is based on driver/pci/controller/dwc/pci-exynos.c
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/module.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +#include <linux/resource.h>
> +#include <linux/types.h>
> +#include <linux/phy/phy.h>
> +
> +#include "pcie-designware.h"
> +
> +#define to_artpec8_pcie(x) dev_get_drvdata((x)->dev)
> +
> +/* Gen3 Control Register */
> +#define PCIE_GEN3_RELATED_OFF 0x890
> +/* Disables equilzation feature */
s/equilzation/equalization/
Comment is probably unnecessary, since the name is so descriptive.
> +#define PCIE_GEN3_EQUALIZATION_DISABLE (0x1 << 16)
> +#define PCIE_GEN3_EQ_PHASE_2_3 (0x1 << 9)
> +#define PCIE_GEN3_RXEQ_PH01_EN (0x1 << 12)
> +#define PCIE_GEN3_RXEQ_RGRDLESS_RXTS (0x1 << 13)
> +
> +#define FAST_LINK_MODE (7)
> +
> +/* PCIe ELBI registers */
> +#define PCIE_IRQ0_STS 0x000
> +#define PCIE_IRQ1_STS 0x004
> +#define PCIE_IRQ2_STS 0x008
> +#define PCIE_IRQ5_STS 0x00C
> +#define PCIE_IRQ0_EN 0x010
> +#define PCIE_IRQ1_EN 0x014
> +#define PCIE_IRQ2_EN 0x018
> +#define PCIE_IRQ5_EN 0x01C
> +#define IRQ_MSI_ENABLE BIT(20)
> +#define PCIE_APP_LTSSM_ENABLE 0x054
> +#define PCIE_ELBI_LTSSM_ENABLE 0x1
> +#define PCIE_ELBI_CXPL_DEBUG_00_31 0x2C8
> +#define PCIE_ELBI_CXPL_DEBUG_32_63 0x2CC
> +#define PCIE_ELBI_SMLH_LINK_UP BIT(4)
> +#define PCIE_ARTPEC8_DEVICE_TYPE 0x080
> +#define DEVICE_TYPE_EP 0x0
> +#define DEVICE_TYPE_LEG_EP 0x1
> +#define DEVICE_TYPE_RC 0x4
> +#define PCIE_ELBI_SLV_AWMISC 0x828
> +#define PCIE_ELBI_SLV_ARMISC 0x820
> +#define PCIE_ELBI_SLV_DBI_ENABLE BIT(21)
> +#define LTSSM_STATE_MASK 0x3f
The previous hex constants used upper-case; this uses lower-case.
Pick one and stick with it.
This seems like a mix of register offsets and definitions of bits
within registers. It's confusing to mentally sort these out. Is
there any way to make this more obvious? Some drivers, e.g.,
pcie-artpec6.c, use "BIT(x)" and "GENMASK(x,y)" for bits within
registers.
> +#define LTSSM_STATE_L0 0x11
> +
> +/* FSYS SYSREG Offsets */
The list below seems to inclue more than just register offsets.
> +#define FSYS_PCIE_CON 0x424
> +#define PCIE_PERSTN BIT(5)
> +#define FSYS_PCIE_DBI_ADDR_CON 0x428
> +#define FSYS_PCIE_DBI_ADDR_OVR_CDM 0x00
> +#define FSYS_PCIE_DBI_ADDR_OVR_SHADOW 0x12
> +#define FSYS_PCIE_DBI_ADDR_OVR_ATU 0x36
> +
> +/* PMU SYSCON Offsets */
> +#define PMU_SYSCON_PCIE_ISOLATION 0x3200
> +
> +/* BUS P/S SYSCON Offsets */
> +#define BUS_SYSCON_BUS_PATH_ENABLE 0x0
> +
> +int artpec8_pcie_dbi_addr_con[] = {
> + FSYS_PCIE_DBI_ADDR_CON
> +};
> +
> +struct artpec8_pcie {
> + struct dw_pcie *pci;
> + struct clk *pipe_clk;
> + struct clk *dbi_clk;
> + struct clk *mstr_clk;
> + struct clk *slv_clk;
> + const struct artpec8_pcie_pdata *pdata;
> + void __iomem *elbi_base;
> + struct regmap *sysreg;
> + struct regmap *pmu_syscon;
> + struct regmap *bus_s_syscon;
> + struct regmap *bus_p_syscon;
> + enum dw_pcie_device_mode mode;
> + int link_id;
> + /* For Generic PHY Framework */
Superfluous comment.
> + struct phy *phy;
> +};
> +
> +struct artpec8_pcie_res_ops {
> + int (*get_mem_resources)(struct platform_device *pdev,
> + struct artpec8_pcie *artpec8_ctrl);
> + int (*get_clk_resources)(struct platform_device *pdev,
> + struct artpec8_pcie *artpec8_ctrl);
> + int (*init_clk_resources)(struct artpec8_pcie *artpec8_ctrl);
> + void (*deinit_clk_resources)(struct artpec8_pcie *artpec8_ctrl);
> +};
> +
> +struct artpec8_pcie_pdata {
> + const struct dw_pcie_ops *dwc_ops;
> + const struct dw_pcie_host_ops *host_ops;
Fix indentation to match surrounding code.
> + const struct artpec8_pcie_res_ops *res_ops;
> + enum dw_pcie_device_mode mode;
> +};
> +
> +enum artpec8_pcie_isolation {
> + PCIE_CLEAR_ISOLATION = 0,
> + PCIE_SET_ISOLATION = 1
> +};
> +
> +enum artpec8_pcie_reg_bit {
> + PCIE_REG_BIT_LOW = 0,
> + PCIE_REG_BIT_HIGH = 1
> +};
> +
> +static void artpec8_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base,
> + u32 reg, size_t size, u32 val);
> +static u32 artpec8_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base,
> + u32 reg, size_t size);
> +static void artpec8_pcie_writel(void __iomem *base, u32 val, u32 reg);
Can you reorder the function definitions to avoid the need for these
forward declarations?
> +static int artpec8_pcie_get_subsystem_resources(struct platform_device *pdev,
> + struct artpec8_pcie *artpec8_ctrl)
> +{
> + struct device *dev = &pdev->dev;
> +
> + /* External Local Bus interface(ELBI) Register */
> + artpec8_ctrl->elbi_base = devm_platform_ioremap_resource_byname(pdev, "elbi");
Rewrap to fit in 80 columns.
> + if (IS_ERR(artpec8_ctrl->elbi_base)) {
> + dev_err(dev, "failed to map elbi_base\n");
> + return PTR_ERR(artpec8_ctrl->elbi_base);
> + }
> +
> + /* fsys sysreg regmap handle */
All these comments are superfluous since they only repeat the lookup
arguments.
> + artpec8_ctrl->sysreg =
> + syscon_regmap_lookup_by_phandle(dev->of_node,
The above two lines should fit on one line.
> + "samsung,fsys-sysreg");
> + if (IS_ERR(artpec8_ctrl->sysreg)) {
> + dev_err(dev, "fsys sysreg regmap lookup failed.\n");
> + return PTR_ERR(artpec8_ctrl->sysreg);
> + }
> +
> + /* pmu syscon regmap handle */
> + artpec8_ctrl->pmu_syscon = syscon_regmap_lookup_by_phandle(dev->of_node,
> + "samsung,syscon-phandle");
> + if (IS_ERR(artpec8_ctrl->pmu_syscon)) {
> + dev_err(dev, "pmu syscon regmap lookup failed.\n");
> + return PTR_ERR(artpec8_ctrl->pmu_syscon);
> + }
> +
> + /* bus s syscon regmap handle */
> + artpec8_ctrl->bus_s_syscon =
> + syscon_regmap_lookup_by_phandle(dev->of_node,
> + "samsung,syscon-bus-s-fsys");
> + if (IS_ERR(artpec8_ctrl->bus_s_syscon)) {
> + dev_err(dev, "bus_s_syscon regmap lookup failed.\n");
> + return PTR_ERR(artpec8_ctrl->bus_s_syscon);
> + }
> +
> + /* bus p syscon regmap handle */
> + artpec8_ctrl->bus_p_syscon =
> + syscon_regmap_lookup_by_phandle(dev->of_node,
> + "samsung,syscon-bus-p-fsys");
> + if (IS_ERR(artpec8_ctrl->bus_p_syscon)) {
> + dev_err(dev, "bus_p_syscon regmap lookup failed.\n");
> + return PTR_ERR(artpec8_ctrl->bus_p_syscon);
> + }
> +
> + return 0;
> +}
> +
> +static int artpec8_pcie_get_rc_mem_resources(struct platform_device *pdev,
> + struct artpec8_pcie *artpec8_ctrl)
> +{
> + struct dw_pcie *pci = artpec8_ctrl->pci;
> +
> + /* Data Bus Interface(DBI) Register */
> + pci->dbi_base = devm_platform_ioremap_resource_byname(pdev, "dbi");
> + if (IS_ERR(pci->dbi_base))
> + return PTR_ERR(pci->dbi_base);
> +
> + return 0;
> +}
> +
> +static int artpec8_pcie_get_ep_mem_resources(struct platform_device *pdev,
> + struct artpec8_pcie *artpec8_ctrl)
> +{
> + struct dw_pcie_ep *ep;
> + struct dw_pcie *pci = artpec8_ctrl->pci;
> + struct device *dev = &pdev->dev;
> + struct resource *res;
> +
> + ep = &pci->ep;
Reorder the locals above:
struct dw_pcie *pci = artpec8_ctrl->pci;
struct device *dev = &pdev->dev;
struct dw_pcie_ep *ep = &pci->ep;
struct resource *res;
Then they're in the order you use them and you don't need the extra
"ep = &pci->ep".
> + pci->dbi_base = devm_platform_ioremap_resource_byname(pdev, "dbi");
> + if (IS_ERR(pci->dbi_base)) {
> + dev_err(dev, "failed to map ep_dbics\n");
> + return -ENOMEM;
> + }
> +
> + pci->dbi_base2 = devm_platform_ioremap_resource_byname(pdev, "dbi2");
> + if (IS_ERR(pci->dbi_base2)) {
> + dev_err(dev, "failed to map ep_dbics2\n");
> + return -ENOMEM;
> + }
> +
> + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "addr_space");
> + if (!res)
> + return -EINVAL;
> + ep->phys_base = res->start;
> + ep->addr_size = resource_size(res);
> +
> + return 0;
> +}
> +
> +static int artpec8_pcie_get_clk_resources(struct platform_device *pdev,
> + struct artpec8_pcie *artpec8_ctrl)
> +{
> + struct device *dev = &pdev->dev;
> +
> + artpec8_ctrl->pipe_clk = devm_clk_get(dev, "pipe_clk");
> + if (IS_ERR(artpec8_ctrl->pipe_clk)) {
> + dev_err(dev, "couldn't get pipe clock\n");
> + return -EINVAL;
> + }
> +
> + artpec8_ctrl->dbi_clk = devm_clk_get(dev, "dbi_clk");
> + if (IS_ERR(artpec8_ctrl->dbi_clk)) {
> + dev_info(dev, "couldn't get dbi clk\n");
> + return -EINVAL;
> + }
> +
> + artpec8_ctrl->slv_clk = devm_clk_get(dev, "slv_clk");
> + if (IS_ERR(artpec8_ctrl->slv_clk)) {
> + dev_err(dev, "couldn't get slave clock\n");
> + return -EINVAL;
> + }
> +
> + artpec8_ctrl->mstr_clk = devm_clk_get(dev, "mstr_clk");
> + if (IS_ERR(artpec8_ctrl->mstr_clk)) {
> + dev_info(dev, "couldn't get master clk\n");
It'd be nice if the err/info messages matched the exact DT name:
"pipe_clk", "dbi_clk", slv_clk", etc.
Why are some of the above dev_err() and others dev_info() when you
return -EINVAL in all cases?
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int artpec8_pcie_init_clk_resources(struct artpec8_pcie *artpec8_ctrl)
> +{
> + clk_prepare_enable(artpec8_ctrl->pipe_clk);
> + clk_prepare_enable(artpec8_ctrl->dbi_clk);
> + clk_prepare_enable(artpec8_ctrl->mstr_clk);
> + clk_prepare_enable(artpec8_ctrl->slv_clk);
> +
> + return 0;
> +}
> +
> +static void artpec8_pcie_deinit_clk_resources(struct artpec8_pcie *artpec8_ctrl)
> +{
> + clk_disable_unprepare(artpec8_ctrl->slv_clk);
> + clk_disable_unprepare(artpec8_ctrl->mstr_clk);
> + clk_disable_unprepare(artpec8_ctrl->dbi_clk);
> + clk_disable_unprepare(artpec8_ctrl->pipe_clk);
> +}
> +
> +static const struct artpec8_pcie_res_ops artpec8_pcie_rc_res_ops = {
> + .get_mem_resources = artpec8_pcie_get_rc_mem_resources,
> + .get_clk_resources = artpec8_pcie_get_clk_resources,
> + .init_clk_resources = artpec8_pcie_init_clk_resources,
> + .deinit_clk_resources = artpec8_pcie_deinit_clk_resources,
> +};
> +
> +static const struct artpec8_pcie_res_ops artpec8_pcie_ep_res_ops = {
> + .get_mem_resources = artpec8_pcie_get_ep_mem_resources,
> + .get_clk_resources = artpec8_pcie_get_clk_resources,
> + .init_clk_resources = artpec8_pcie_init_clk_resources,
> + .deinit_clk_resources = artpec8_pcie_deinit_clk_resources,
> +};
> +
> +static void artpec8_pcie_writel(void __iomem *base, u32 val, u32 reg)
> +{
> + writel(val, base + reg);
> +}
> +
> +static u32 artpec8_pcie_readl(void __iomem *base, u32 reg)
> +{
> + return readl(base + reg);
> +}
> +
> +static int artpec8_pcie_config_phy_power_isolation(struct dw_pcie *pci,
> + enum artpec8_pcie_reg_bit val)
> +{
> + struct artpec8_pcie *artpec8_ctrl = to_artpec8_pcie(pci);
> + int ret;
> +
> + ret = regmap_write(artpec8_ctrl->pmu_syscon, PMU_SYSCON_PCIE_ISOLATION,
> + val);
> +
> + return ret;
return regmap_write(artpec8_ctrl->pmu_syscon, ...);
> +}
> +
> +static int artpec8_pcie_config_bus_enable(struct dw_pcie *pci,
> + enum artpec8_pcie_reg_bit val)
> +{
> + struct artpec8_pcie *artpec8_ctrl = to_artpec8_pcie(pci);
> + int ret;
> +
> + ret = regmap_write(artpec8_ctrl->bus_p_syscon,
> + BUS_SYSCON_BUS_PATH_ENABLE, val);
> + if (ret)
> + return ret;
> +
> + ret = regmap_write(artpec8_ctrl->bus_s_syscon,
> + BUS_SYSCON_BUS_PATH_ENABLE, val);
> + if (ret)
> + return ret;
> +
> + return ret;
return regmap_write(artpec8_ctrl->bus_s_syscon, ...);
> +}
> +
> +static int artpec8_pcie_config_isolation(struct dw_pcie *pci,
> + enum artpec8_pcie_isolation val)
> +{
> + int ret;
> + /* reg_val[0] : for phy power isolation */
> + /* reg_val[1] : for bus enable */
> + enum artpec8_pcie_reg_bit reg_val[2];
> +
> + switch (val) {
> + case PCIE_CLEAR_ISOLATION:
> + reg_val[0] = PCIE_REG_BIT_LOW;
> + reg_val[1] = PCIE_REG_BIT_HIGH;
> + break;
> + case PCIE_SET_ISOLATION:
> + reg_val[0] = PCIE_REG_BIT_HIGH;
> + reg_val[1] = PCIE_REG_BIT_LOW;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + ret = artpec8_pcie_config_phy_power_isolation(pci, reg_val[0]);
> + if (ret)
> + return ret;
> +
> + ret = artpec8_pcie_config_bus_enable(pci, reg_val[1]);
> + if (ret)
> + return ret;
> +
> + return ret;
return artpec8_pcie_config_bus_enable(pci, ...);
> +}
> +
> +static int artpec8_pcie_config_perstn(struct dw_pcie *pci,
> + enum artpec8_pcie_reg_bit val)
> +{
> + struct artpec8_pcie *artpec8_ctrl = to_artpec8_pcie(pci);
> + unsigned int bits;
> + int ret;
> +
> + if (val == PCIE_REG_BIT_HIGH)
> + bits = PCIE_PERSTN;
> + else
> + bits = 0;
> +
> + ret = regmap_update_bits(artpec8_ctrl->sysreg, FSYS_PCIE_CON,
> + PCIE_PERSTN, bits);
> +
> + return ret;
return regmap_update_bits(artpec8_ctrl->sysreg, ...):
> +}
> +
> +static void artpec8_pcie_stop_link(struct dw_pcie *pci)
> +{
> + struct artpec8_pcie *artpec8_ctrl = to_artpec8_pcie(pci);
> + u32 val;
> +
> + val = artpec8_pcie_readl(artpec8_ctrl->elbi_base,
> + PCIE_APP_LTSSM_ENABLE);
> +
> + val &= ~PCIE_ELBI_LTSSM_ENABLE;
> + artpec8_pcie_writel(artpec8_ctrl->elbi_base, val,
> + PCIE_APP_LTSSM_ENABLE);
> +}
> +
> +static int artpec8_pcie_start_link(struct dw_pcie *pci)
> +{
> + struct artpec8_pcie *artpec8_ctrl = to_artpec8_pcie(pci);
> + u32 val;
> +
> + dw_pcie_dbi_ro_wr_en(pci);
> +
> + /* Equalization disable */
> + val = artpec8_pcie_read_dbi(pci, pci->dbi_base, PCIE_GEN3_RELATED_OFF,
> + 4);
> + artpec8_pcie_write_dbi(pci, pci->dbi_base, PCIE_GEN3_RELATED_OFF, 4,
> + val | PCIE_GEN3_EQUALIZATION_DISABLE);
> +
> + dw_pcie_dbi_ro_wr_dis(pci);
> +
> + /* assert LTSSM enable */
> + val = artpec8_pcie_readl(artpec8_ctrl->elbi_base,
> + PCIE_APP_LTSSM_ENABLE);
> +
> + val |= PCIE_ELBI_LTSSM_ENABLE;
> + artpec8_pcie_writel(artpec8_ctrl->elbi_base, val,
> + PCIE_APP_LTSSM_ENABLE);
> +
> + return 0;
> +}
> +
> +static irqreturn_t artpec8_pcie_msi_irq_handler(int irq, void *arg)
> +{
> + struct artpec8_pcie *artpec8_ctrl = arg;
> + struct dw_pcie *pci = artpec8_ctrl->pci;
> + struct pcie_port *pp = &pci->pp;
> + u32 val;
> +
> + val = artpec8_pcie_readl(artpec8_ctrl->elbi_base, PCIE_IRQ2_STS);
> +
> + if ((val & IRQ_MSI_ENABLE) == IRQ_MSI_ENABLE) {
> + val &= IRQ_MSI_ENABLE;
> + artpec8_pcie_writel(artpec8_ctrl->elbi_base, val,
> + PCIE_IRQ2_STS);
> + dw_handle_msi_irq(pp);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void artpec8_pcie_msi_init(struct artpec8_pcie *artpec8_ctrl)
> +{
> + u32 val;
> +
> + /* enable MSI interrupt */
> + val = artpec8_pcie_readl(artpec8_ctrl->elbi_base, PCIE_IRQ2_EN);
> + val |= IRQ_MSI_ENABLE;
> + artpec8_pcie_writel(artpec8_ctrl->elbi_base, val, PCIE_IRQ2_EN);
> +}
> +
> +static void artpec8_pcie_enable_interrupts(struct artpec8_pcie *artpec8_ctrl)
> +{
> + if (IS_ENABLED(CONFIG_PCI_MSI))
> + artpec8_pcie_msi_init(artpec8_ctrl);
> +}
> +
> +static u32 artpec8_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base,
> + u32 reg, size_t size)
> +{
> + struct artpec8_pcie *artpec8_ctrl = to_artpec8_pcie(pci);
> + u32 val;
> + bool is_atu = false;
> +
> + if (base == pci->atu_base) {
> + is_atu = true;
> + base = pci->dbi_base;
> + regmap_write(artpec8_ctrl->sysreg,
> + artpec8_pcie_dbi_addr_con[artpec8_ctrl->link_id],
> + FSYS_PCIE_DBI_ADDR_OVR_ATU);
> + }
> +
> + dw_pcie_read(base + reg, size, &val);
> +
> + if (is_atu)
> + regmap_write(artpec8_ctrl->sysreg,
> + artpec8_pcie_dbi_addr_con[artpec8_ctrl->link_id],
> + FSYS_PCIE_DBI_ADDR_OVR_CDM);
> +
> + return val;
> +}
> +
> +static void artpec8_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base,
> + u32 reg, size_t size, u32 val)
> +{
> + struct artpec8_pcie *artpec8_ctrl = to_artpec8_pcie(pci);
> + bool is_atu = false;
> +
> + if (base == pci->atu_base) {
> + is_atu = true;
> + base = pci->dbi_base;
> + regmap_write(artpec8_ctrl->sysreg,
> + artpec8_pcie_dbi_addr_con[artpec8_ctrl->link_id],
> + FSYS_PCIE_DBI_ADDR_OVR_ATU);
> + }
> +
> + dw_pcie_write(base + reg, size, val);
> +
> + if (is_atu)
> + regmap_write(artpec8_ctrl->sysreg,
> + artpec8_pcie_dbi_addr_con[artpec8_ctrl->link_id],
> + FSYS_PCIE_DBI_ADDR_OVR_CDM);
> +}
> +
> +static void artpec8_pcie_write_dbi2(struct dw_pcie *pci, void __iomem *base,
> + u32 reg, size_t size, u32 val)
> +{
> + struct artpec8_pcie *artpec8_ctrl = to_artpec8_pcie(pci);
> +
> + regmap_write(artpec8_ctrl->sysreg,
> + artpec8_pcie_dbi_addr_con[artpec8_ctrl->link_id],
> + FSYS_PCIE_DBI_ADDR_OVR_SHADOW);
> +
> + dw_pcie_write(base + reg, size, val);
> +
> + regmap_write(artpec8_ctrl->sysreg,
> + artpec8_pcie_dbi_addr_con[artpec8_ctrl->link_id],
> + FSYS_PCIE_DBI_ADDR_OVR_CDM);
> +}
> +
> +static int artpec8_pcie_rd_own_conf(struct pci_bus *bus, unsigned int devfn,
> + int where, int size, u32 *val)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(bus->sysdata);
> +
> + if (PCI_SLOT(devfn)) {
> + *val = ~0;
PCI_SET_ERROR_RESPONSE(val);
> + return PCIBIOS_DEVICE_NOT_FOUND;
> + }
> +
> + *val = dw_pcie_read_dbi(pci, where, size);
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static int artpec8_pcie_wr_own_conf(struct pci_bus *bus, unsigned int devfn,
> + int where, int size, u32 val)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(bus->sysdata);
> +
> + if (PCI_SLOT(devfn))
> + return PCIBIOS_DEVICE_NOT_FOUND;
> +
> + dw_pcie_write_dbi(pci, where, size, val);
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static struct pci_ops artpec8_pci_ops = {
> + .read = artpec8_pcie_rd_own_conf,
> + .write = artpec8_pcie_wr_own_conf,
> +};
> +
> +static int artpec8_pcie_link_up(struct dw_pcie *pci)
> +{
> + struct artpec8_pcie *artpec8_ctrl = to_artpec8_pcie(pci);
> + u32 val;
> +
> + val = artpec8_pcie_readl(artpec8_ctrl->elbi_base,
> + PCIE_ELBI_CXPL_DEBUG_00_31);
> +
> + return (val & LTSSM_STATE_MASK) == LTSSM_STATE_L0;
> +}
> +
> +static int artpec8_pcie_host_init(struct pcie_port *pp)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct artpec8_pcie *artpec8_ctrl = to_artpec8_pcie(pci);
> +
> + pp->bridge->ops = &artpec8_pci_ops;
> +
> + dw_pcie_writel_dbi(pci, PCIE_GEN3_RELATED_OFF,
> + (PCIE_GEN3_EQ_PHASE_2_3 |
> + PCIE_GEN3_RXEQ_PH01_EN |
> + PCIE_GEN3_RXEQ_RGRDLESS_RXTS));
> +
> + artpec8_pcie_enable_interrupts(artpec8_ctrl);
> +
> + return 0;
> +}
> +
> +static const struct dw_pcie_host_ops artpec8_pcie_host_ops = {
> + .host_init = artpec8_pcie_host_init,
> +};
> +
> +static u8 artpec8_pcie_iatu_unroll_enabled(struct dw_pcie *pci)
> +{
> + u32 val;
> +
> + val = dw_pcie_readl_dbi(pci, PCIE_ATU_VIEWPORT);
> + pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
> +
> + if (val == 0xffffffff)
> + return 1;
> +
> + return 0;
> +}
> +
> +static void artpec8_pcie_ep_init(struct dw_pcie_ep *ep)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> + enum pci_barno bar;
Add blank line here and use usual multi-line comment style:
/*
* Currently PCIe EP core is not ...
> + /* Currently PCIe EP core is not setting iatu_unroll_enabled
> + * so let's handle it here. We need to find proper place to
> + * initialize this so that it can be used as for other EP
... can be used for ...
> + * controllers as well.
> + */
> + pci->iatu_unroll_enabled = artpec8_pcie_iatu_unroll_enabled(pci);
> +
> + for (bar = BAR_0; bar <= BAR_5; bar++)
> + dw_pcie_ep_reset_bar(pci, bar);
> +}
> +
> +static int artpec8_pcie_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
> + enum pci_epc_irq_type type, u16 interrupt_num)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> +
> + switch (type) {
> + case PCI_EPC_IRQ_LEGACY:
> + return -EINVAL;
> + case PCI_EPC_IRQ_MSI:
> + return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
> + default:
> + dev_err(pci->dev, "UNKNOWN IRQ type\n");
> + }
> +
> + return 0;
> +}
> +
> +static const struct pci_epc_features artpec8_pcie_epc_features = {
> + .linkup_notifier = false,
> + .msi_capable = true,
> + .msix_capable = false,
> +};
> +
> +static const struct pci_epc_features*
> +artpec8_pcie_ep_get_features(struct dw_pcie_ep *ep)
> +{
> + return &artpec8_pcie_epc_features;
> +}
> +
> +static const struct dw_pcie_ep_ops artpec8_dw_pcie_ep_ops = {
> + .ep_init = artpec8_pcie_ep_init,
> + .raise_irq = artpec8_pcie_raise_irq,
> + .get_features = artpec8_pcie_ep_get_features,
> +};
> +
> +static int __init artpec8_add_pcie_ep(struct artpec8_pcie *artpec8_ctrl,
> + struct platform_device *pdev)
> +{
> + int ret;
> + struct dw_pcie_ep *ep;
> + struct dw_pcie *pci = artpec8_ctrl->pci;
> +
> + ep = &pci->ep;
Reorder locals and initialize ep as above.
> + ep->ops = &artpec8_dw_pcie_ep_ops;
> +
> + dw_pcie_writel_dbi(pci, PCIE_GEN3_RELATED_OFF,
> + (PCIE_GEN3_EQ_PHASE_2_3 |
> + PCIE_GEN3_RXEQ_PH01_EN |
> + PCIE_GEN3_RXEQ_RGRDLESS_RXTS));
> +
> + ret = dw_pcie_ep_init(ep);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int __init artpec8_add_pcie_port(struct artpec8_pcie *artpec8_ctrl,
> + struct platform_device *pdev)
> +{
> + struct dw_pcie *pci = artpec8_ctrl->pci;
> + struct pcie_port *pp = &pci->pp;
> + struct device *dev = &pdev->dev;
> + int ret;
> + int irq_flags;
> + int irq;
Reorder to be in order of use:
struct dw_pcie *pci = artpec8_ctrl->pci;
struct pcie_port *pp = &pci->pp;
struct device *dev = &pdev->dev;
int irq;
int irq_flags;
int ret;
> +
> + if (IS_ENABLED(CONFIG_PCI_MSI)) {
> + irq = platform_get_irq_byname(pdev, "intr");
> + if (!irq)
> + return -ENODEV;
> +
> + irq_flags = IRQF_SHARED | IRQF_NO_THREAD;
> +
> + ret = devm_request_irq(dev, irq, artpec8_pcie_msi_irq_handler,
> + irq_flags, "artpec8-pcie", artpec8_ctrl);
> + if (ret)
> + return ret;
> + }
> +
> + /* Prevent core for messing with the IRQ, since it's muxed */
Prevent core from ...
> + pp->msi_irq = -ENODEV;
> +
> + ret = dw_pcie_host_init(pp);
> + if (ret)
> + return ret;
> +
> + return 0;
return dw_pcie_host_init(pp);
> +}
> +
> +static const struct dw_pcie_ops artpec8_dw_pcie_ops = {
> + .read_dbi = artpec8_pcie_read_dbi,
> + .write_dbi = artpec8_pcie_write_dbi,
> + .write_dbi2 = artpec8_pcie_write_dbi2,
> + .start_link = artpec8_pcie_start_link,
> + .stop_link = artpec8_pcie_stop_link,
> + .link_up = artpec8_pcie_link_up,
> +};
> +
> +static int artpec8_pcie_probe(struct platform_device *pdev)
> +{
> + int ret;
> + struct dw_pcie *pci;
> + struct pcie_port *pp;
> + struct artpec8_pcie *artpec8_ctrl;
> + enum dw_pcie_device_mode mode;
> + struct device *dev = &pdev->dev;
> + const struct artpec8_pcie_pdata *pdata;
> + struct device_node *np = dev->of_node;
Reorder in order of use.
> + artpec8_ctrl = devm_kzalloc(dev, sizeof(*artpec8_ctrl), GFP_KERNEL);
> + if (!artpec8_ctrl)
> + return -ENOMEM;
> +
> + pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
> + if (!pci)
> + return -ENOMEM;
> +
> + pdata = (const struct artpec8_pcie_pdata *)
Unnecessary cast.
> + of_device_get_match_data(dev);
> + if (!pdata)
> + return -ENODEV;
> +
> + mode = (enum dw_pcie_device_mode)pdata->mode;
> +
> + artpec8_ctrl->pci = pci;
> + artpec8_ctrl->pdata = pdata;
> + artpec8_ctrl->mode = mode;
> +
> + pci->dev = dev;
> + pci->ops = pdata->dwc_ops;
> + pci->dbi_base2 = NULL;
> + pci->dbi_base = NULL;
> + pp = &pci->pp;
> + pp->ops = artpec8_ctrl->pdata->host_ops;
> +
> + if (mode == DW_PCIE_RC_TYPE)
> + artpec8_ctrl->link_id = of_alias_get_id(np, "pcierc");
> + else
> + artpec8_ctrl->link_id = of_alias_get_id(np, "pcieep");
> +
> + ret = artpec8_pcie_get_subsystem_resources(pdev, artpec8_ctrl);
> + if (ret)
> + return ret;
> +
> + if (pdata->res_ops && pdata->res_ops->get_mem_resources) {
> + ret = pdata->res_ops->get_mem_resources(pdev, artpec8_ctrl);
> + if (ret)
> + return ret;
> + }
> +
> + if (pdata->res_ops && pdata->res_ops->get_clk_resources) {
> + ret = pdata->res_ops->get_clk_resources(pdev, artpec8_ctrl);
> + if (ret)
> + return ret;
> +
> + ret = pdata->res_ops->init_clk_resources(artpec8_ctrl);
> + if (ret)
> + return ret;
> + }
> +
> + platform_set_drvdata(pdev, artpec8_ctrl);
> +
> + ret = artpec8_pcie_config_isolation(pci, PCIE_CLEAR_ISOLATION);
> + if (ret)
> + return ret;
> +
> + ret = artpec8_pcie_config_perstn(pci, PCIE_REG_BIT_HIGH);
> + if (ret)
> + return ret;
> +
> + artpec8_ctrl->phy = devm_of_phy_get(dev, np, NULL);
> + if (IS_ERR(artpec8_ctrl->phy))
> + return PTR_ERR(artpec8_ctrl->phy);
> +
> + phy_init(artpec8_ctrl->phy);
> + phy_reset(artpec8_ctrl->phy);
> +
> + switch (mode) {
> + case DW_PCIE_RC_TYPE:
> + artpec8_pcie_writel(artpec8_ctrl->elbi_base, DEVICE_TYPE_RC,
> + PCIE_ARTPEC8_DEVICE_TYPE);
> + ret = artpec8_add_pcie_port(artpec8_ctrl, pdev);
> + if (ret < 0)
Are there positive return values that indicate success? Most places
above you assume "ret != 0" means failure, so just curious why you
test "ret < 0" instead of just "ret".
> + goto fail_probe;
> + break;
> + case DW_PCIE_EP_TYPE:
> + artpec8_pcie_writel(artpec8_ctrl->elbi_base, DEVICE_TYPE_EP,
> + PCIE_ARTPEC8_DEVICE_TYPE);
> +
> + ret = artpec8_add_pcie_ep(artpec8_ctrl, pdev);
> + if (ret < 0)
Same question.
> + goto fail_probe;
> + break;
> + default:
> + ret = -EINVAL;
> + goto fail_probe;
> + }
> +
> + return 0;
> +
> +fail_probe:
> + phy_exit(artpec8_ctrl->phy);
> + if (pdata->res_ops && pdata->res_ops->deinit_clk_resources)
> + pdata->res_ops->deinit_clk_resources(artpec8_ctrl);
> +
> + return ret;
> +}
> +
> +static int __exit artpec8_pcie_remove(struct platform_device *pdev)
> +{
> + struct artpec8_pcie *artpec8_ctrl = platform_get_drvdata(pdev);
> + const struct artpec8_pcie_pdata *pdata = artpec8_ctrl->pdata;
> +
> + if (pdata->res_ops && pdata->res_ops->deinit_clk_resources)
> + pdata->res_ops->deinit_clk_resources(artpec8_ctrl);
> +
> + return 0;
> +}
> +
> +static const struct artpec8_pcie_pdata artpec8_pcie_rc_pdata = {
> + .dwc_ops = &artpec8_dw_pcie_ops,
> + .host_ops = &artpec8_pcie_host_ops,
> + .res_ops = &artpec8_pcie_rc_res_ops,
> + .mode = DW_PCIE_RC_TYPE,
> +};
> +
> +static const struct artpec8_pcie_pdata artpec8_pcie_ep_pdata = {
> + .dwc_ops = &artpec8_dw_pcie_ops,
> + .host_ops = &artpec8_pcie_host_ops,
> + .res_ops = &artpec8_pcie_ep_res_ops,
> + .mode = DW_PCIE_EP_TYPE,
> +};
> +
> +static const struct of_device_id artpec8_pcie_of_match[] = {
> + {
> + .compatible = "axis,artpec8-pcie",
> + .data = &artpec8_pcie_rc_pdata,
> + },
> + {
> + .compatible = "axis,artpec8-pcie-ep",
> + .data = &artpec8_pcie_ep_pdata,
> + },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, artpec8_pcie_of_match);
> +
> +static struct platform_driver artpec8_pcie_driver = {
> + .probe = artpec8_pcie_probe,
> + .remove = __exit_p(artpec8_pcie_remove),
> + .driver = {
> + .name = "artpec8-pcie",
> + .of_match_table = artpec8_pcie_of_match,
> + },
> +};
> +
> +module_platform_driver(artpec8_pcie_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Jaeho Cho <jaeho79.cho at samsung.com>");
> --
> 2.9.5
>
> --
> linux-phy mailing list
> linux-phy at lists.infradead.org
> https://lists.infradead.org/mailman/listinfo/linux-phy
More information about the linux-phy
mailing list