[RFC PATCH v3 29/30] phy: qcom-qmp-pcie-msm8996: use bulk reset_control API
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Thu Jun 2 00:09:08 PDT 2022
Switch qcom-qmp-pcie-msm8996 driver to use reset_control_bulk_assert /
_deassert functions rather than hardcoding the loops in the driver
itself.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
.../phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c | 49 +++++++------------
1 file changed, 18 insertions(+), 31 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
index 51da3a3a199e..48ea1de81d7c 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c
@@ -340,7 +340,7 @@ struct qcom_qmp {
struct device *dev;
struct clk_bulk_data *clks;
- struct reset_control **resets;
+ struct reset_control_bulk_data *resets;
struct regulator_bulk_data *vregs;
struct qmp_phy **phys;
@@ -489,7 +489,7 @@ static int qcom_qmp_phy_pcie_msm8996_com_init(struct qmp_phy *qphy)
struct qcom_qmp *qmp = qphy->qmp;
const struct qmp_phy_cfg *cfg = qphy->cfg;
void __iomem *serdes = qphy->serdes;
- int ret, i;
+ int ret;
mutex_lock(&qmp->phy_mutex);
if (qmp->init_count++) {
@@ -504,22 +504,16 @@ static int qcom_qmp_phy_pcie_msm8996_com_init(struct qmp_phy *qphy)
goto err_unlock;
}
- for (i = 0; i < cfg->num_resets; i++) {
- ret = reset_control_assert(qmp->resets[i]);
- if (ret) {
- dev_err(qmp->dev, "%s reset assert failed\n",
- cfg->reset_list[i]);
- goto err_disable_regulators;
- }
+ ret = reset_control_bulk_assert(cfg->num_resets, qmp->resets);
+ if (ret) {
+ dev_err(qmp->dev, "reset assert failed\n");
+ goto err_disable_regulators;
}
- for (i = cfg->num_resets - 1; i >= 0; i--) {
- ret = reset_control_deassert(qmp->resets[i]);
- if (ret) {
- dev_err(qmp->dev, "%s reset deassert failed\n",
- qphy->cfg->reset_list[i]);
- goto err_assert_reset;
- }
+ ret = reset_control_bulk_deassert(cfg->num_resets, qmp->resets);
+ if (ret) {
+ dev_err(qmp->dev, "reset deassert failed\n");
+ goto err_disable_regulators;
}
ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
@@ -534,8 +528,7 @@ static int qcom_qmp_phy_pcie_msm8996_com_init(struct qmp_phy *qphy)
return 0;
err_assert_reset:
- while (++i < cfg->num_resets)
- reset_control_assert(qmp->resets[i]);
+ reset_control_bulk_assert(cfg->num_resets, qmp->resets);
err_disable_regulators:
regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
err_unlock:
@@ -549,7 +542,6 @@ static int qcom_qmp_phy_pcie_msm8996_com_exit(struct qmp_phy *qphy)
struct qcom_qmp *qmp = qphy->qmp;
const struct qmp_phy_cfg *cfg = qphy->cfg;
void __iomem *serdes = qphy->serdes;
- int i = cfg->num_resets;
mutex_lock(&qmp->phy_mutex);
if (--qmp->init_count) {
@@ -564,8 +556,7 @@ static int qcom_qmp_phy_pcie_msm8996_com_exit(struct qmp_phy *qphy)
qphy_setbits(serdes, cfg->regs[QPHY_COM_POWER_DOWN_CONTROL],
SW_PWRDN);
- while (--i >= 0)
- reset_control_assert(qmp->resets[i]);
+ reset_control_bulk_assert(cfg->num_resets, qmp->resets);
clk_bulk_disable_unprepare(cfg->num_clks, qmp->clks);
@@ -769,23 +760,19 @@ static int qcom_qmp_phy_pcie_msm8996_reset_init(struct device *dev, const struct
{
struct qcom_qmp *qmp = dev_get_drvdata(dev);
int i;
+ int ret;
qmp->resets = devm_kcalloc(dev, cfg->num_resets,
sizeof(*qmp->resets), GFP_KERNEL);
if (!qmp->resets)
return -ENOMEM;
- for (i = 0; i < cfg->num_resets; i++) {
- struct reset_control *rst;
- const char *name = cfg->reset_list[i];
+ for (i = 0; i < cfg->num_resets; i++)
+ qmp->resets[i].id = cfg->reset_list[i];
- rst = devm_reset_control_get_exclusive(dev, name);
- if (IS_ERR(rst)) {
- dev_err(dev, "failed to get %s reset\n", name);
- return PTR_ERR(rst);
- }
- qmp->resets[i] = rst;
- }
+ ret = devm_reset_control_bulk_get_exclusive(dev, cfg->num_resets, qmp->resets);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to get resets\n");
return 0;
}
--
2.35.1
More information about the linux-phy
mailing list