[PATCH net-next v3 46/47] arm64: dts: ls1046ardb: Add serdes bindings

Sean Anderson sean.anderson at seco.com
Mon Jul 25 13:02:13 PDT 2022



On 7/22/22 8:41 AM, Camelia Alexandra Groza wrote:
>> -----Original Message-----
>> From: Sean Anderson <sean.anderson at seco.com>
>> Sent: Thursday, July 21, 2022 18:41
>> To: Camelia Alexandra Groza <camelia.groza at nxp.com>; David S . Miller
>> <davem at davemloft.net>; Jakub Kicinski <kuba at kernel.org>; Madalin Bucur
>> <madalin.bucur at nxp.com>; netdev at vger.kernel.org
>> Cc: Paolo Abeni <pabeni at redhat.com>; Eric Dumazet
>> <edumazet at google.com>; linux-arm-kernel at lists.infradead.org; Russell
>> King <linux at armlinux.org.uk>; linux-kernel at vger.kernel.org; Kishon Vijay
>> Abraham I <kishon at ti.com>; Krzysztof Kozlowski
>> <krzysztof.kozlowski+dt at linaro.org>; Leo Li <leoyang.li at nxp.com>; Rob
>> Herring <robh+dt at kernel.org>; Shawn Guo <shawnguo at kernel.org>; Vinod
>> Koul <vkoul at kernel.org>; devicetree at vger.kernel.org; linux-
>> phy at lists.infradead.org
>> Subject: Re: [PATCH net-next v3 46/47] arm64: dts: ls1046ardb: Add serdes
>> bindings
>> 
>> 
>> 
>> On 7/21/22 10:20 AM, Camelia Alexandra Groza wrote:
>> >> -----Original Message-----
>> >> From: Sean Anderson <sean.anderson at seco.com>
>> >> Sent: Saturday, July 16, 2022 1:00
>> >> To: David S . Miller <davem at davemloft.net>; Jakub Kicinski
>> >> <kuba at kernel.org>; Madalin Bucur <madalin.bucur at nxp.com>;
>> >> netdev at vger.kernel.org
>> >> Cc: Paolo Abeni <pabeni at redhat.com>; Eric Dumazet
>> >> <edumazet at google.com>; linux-arm-kernel at lists.infradead.org; Russell
>> >> King <linux at armlinux.org.uk>; linux-kernel at vger.kernel.org; Sean
>> Anderson
>> >> <sean.anderson at seco.com>; Kishon Vijay Abraham I <kishon at ti.com>;
>> >> Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>; Leo Li
>> >> <leoyang.li at nxp.com>; Rob Herring <robh+dt at kernel.org>; Shawn Guo
>> >> <shawnguo at kernel.org>; Vinod Koul <vkoul at kernel.org>;
>> >> devicetree at vger.kernel.org; linux-phy at lists.infradead.org
>> >> Subject: [PATCH net-next v3 46/47] arm64: dts: ls1046ardb: Add serdes
>> >> bindings
>> >>
>> >> This adds appropriate bindings for the macs which use the SerDes. The
>> >> 156.25MHz fixed clock is a crystal. The 100MHz clocks (there are
>> >> actually 3) come from a Renesas 6V49205B at address 69 on i2c0. There is
>> >> no driver for this device (and as far as I know all you can do with the
>> >> 100MHz clocks is gate them), so I have chosen to model it as a single
>> >> fixed clock.
>> >>
>> >> Note: the SerDes1 lane numbering for the LS1046A is *reversed*.
>> >> This means that Lane A (what the driver thinks is lane 0) uses pins
>> >> SD1_TX3_P/N.
>> >>
>> >> Because this will break ethernet if the serdes is not enabled, enable
>> >> the serdes driver by default on Layerscape.
>> >>
>> >> Signed-off-by: Sean Anderson <sean.anderson at seco.com>
>> >> ---
>> >> Please let me know if there is a better/more specific config I can use
>> >> here.
>> >>
>> >> (no changes since v1)
>> >
>> > My LS1046ARDB hangs at boot with this patch right after the second SerDes
>> is probed,
>> > right before the point where the PCI host bridge is registered. I can get
>> around this
>> > either by disabling the second SerDes node from the device tree, or
>> disabling
>> > CONFIG_PCI_LAYERSCAPE at build.
>> >
>> > I haven't debugged it more but there seems to be an issue here.
>> 
>> Hm. Do you have anything plugged into the PCIe/SATA slots? I haven't been
>> testing with
>> anything there. For now, it may be better to just leave it disabled.
>> 
>> --Sean
> 
> Yes, I have an Intel e1000 card plugged in.
> 
> Camelia
> 

Can you try the following patch? I was able to boot with PCI with it applied.

>From 71f4136f1bdda89009936a9c24561b60e0554859 Mon Sep 17 00:00:00 2001
From: Sean Anderson <sean.anderson at seco.com>
Date: Mon, 25 Jul 2022 16:01:16 -0400
Subject: [PATCH] arm64: dts: ls1046a: Fix missing PCIe lane

Signed-off-by: Sean Anderson <sean.anderson at seco.com>
---
 arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 0b3765cad383..3841ba274782 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -532,7 +532,7 @@ pcie-0 {
 					/* PCIe.1 x1 */
 					cfg-1 {
 						fsl,cfg = <0x1>;
-						fsl,first-lane = <1>;
+						fsl,first-lane = <0>;
 					};
 
 					/* PCIe.1 x4 */
@@ -543,6 +543,14 @@ cfg-3 {
 					};
 				};
 
+				/* PCIe.2 x1 */
+				pcie-1 {
+					fsl,index = <1>;
+					fsl,proto = "pcie";
+					fsl,cfg = <0x1>;
+					fsl,first-lane = <1>;
+				};
+
 				pcie-2 {
 					fsl,index = <2>;
 					fsl,proto = "pcie";
-- 
2.35.1.1320.gc452695387.dirty



More information about the linux-phy mailing list