[RFC PATCH 4/4] PCI: qcom-ep: call phy_set_mode_ext()

[Manivannan Sadhasivam]

Subject could be,

"PCI: qcom: Set PHY in RC mode"

On Tue, Jul 19, 2022 at 11:06:26PM +0300, Dmitry Baryshkov wrote:
> Call phy_set_mode_ext() to notify the PHY driver that the PHY is being
> used in the EP mode.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>

Thanks,
Mani

> ---
>  drivers/pci/controller/dwc/pcie-qcom-ep.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
> index ec99116ad05c..11f887a2f7c4 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
> @@ -240,6 +240,10 @@ static int qcom_pcie_enable_resources(struct qcom_pcie_ep *pcie_ep)
>  	if (ret)
>  		goto err_disable_clk;
>  
> +	ret = phy_set_mode_ext(pcie->phy, PHY_MODE_PCIE, 1);
> +	if (ret)
> +		goto err_phy_exit;
> +
>  	ret = phy_power_on(pcie_ep->phy);
>  	if (ret)
>  		goto err_phy_exit;
> -- 
> 2.35.1
> 

-- 
மணிவண்ணன் சதாசிவம்