[PATCH 5/9] arm: bcmbca: Replace ARCH_BCM_63XX with ARCH_BCMBCA

[William Zhang]

Update ARCH_BCM_63XX in all sources to use ARCHB_BCMBCA instead.

Signed-off-by: William Zhang <william.zhang at broadcom.com>
---

 arch/arm/Kconfig.debug         | 2 +-
 drivers/ata/Kconfig            | 2 +-
 drivers/char/hw_random/Kconfig | 2 +-
 drivers/clk/bcm/Kconfig        | 4 ++--
 drivers/i2c/busses/Kconfig     | 2 +-
 drivers/phy/broadcom/Kconfig   | 2 +-
 drivers/spi/Kconfig            | 2 +-
 drivers/tty/serial/Kconfig     | 4 ++--
 8 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9b0aa4822d69..792796a348c3 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -271,7 +271,7 @@ choice
 
 	config DEBUG_BCM63XX_UART
 		bool "Kernel low-level debugging on BCM63XX UART"
-		depends on ARCH_BCM_63XX
+		depends on ARCH_BCMBCA
 
 	config DEBUG_BERLIN_UART
 		bool "Marvell Berlin SoC Debug UART"
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index bb45a9c00514..1c9f4fb2595d 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -148,7 +148,7 @@ config SATA_AHCI_PLATFORM
 config AHCI_BRCM
 	tristate "Broadcom AHCI SATA support"
 	depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \
-		   ARCH_BCM_63XX || COMPILE_TEST
+		   ARCH_BCMBCA || COMPILE_TEST
 	select SATA_HOST
 	help
 	  This option enables support for the AHCI SATA3 controller found on
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index b3f2d55dc551..3da8e85f8aae 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -87,7 +87,7 @@ config HW_RANDOM_BA431
 config HW_RANDOM_BCM2835
 	tristate "Broadcom BCM2835/BCM63xx Random Number Generator support"
 	depends on ARCH_BCM2835 || ARCH_BCM_NSP || ARCH_BCM_5301X || \
-		   ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+		   ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
 	default HW_RANDOM
 	help
 	  This driver provides kernel-side support for the Random Number
diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig
index ec738f74a026..77266afb1c79 100644
--- a/drivers/clk/bcm/Kconfig
+++ b/drivers/clk/bcm/Kconfig
@@ -22,9 +22,9 @@ config CLK_BCM2835
 
 config CLK_BCM_63XX
 	bool "Broadcom BCM63xx clock support"
-	depends on ARCH_BCM_63XX || COMPILE_TEST
+	depends on ARCH_BCMBCA || COMPILE_TEST
 	select COMMON_CLK_IPROC
-	default ARCH_BCM_63XX
+	default ARCH_BCMBCA
 	help
 	  Enable common clock framework support for Broadcom BCM63xx DSL SoCs
 	  based on the ARM architecture
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index b1d7069dd377..acf2a393bd56 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -486,7 +486,7 @@ config I2C_BCM_KONA
 
 config I2C_BRCMSTB
 	tristate "BRCM Settop/DSL I2C controller"
-	depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCM_63XX || \
+	depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCMBCA || \
 		   ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
 	default y
 	help
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index 849c4204f550..93a6a8ee4716 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -83,7 +83,7 @@ config PHY_NS2_USB_DRD
 config PHY_BRCM_SATA
 	tristate "Broadcom SATA PHY driver"
 	depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || \
-		   ARCH_BCM_63XX || COMPILE_TEST
+		   ARCH_BCMBCA || COMPILE_TEST
 	depends on OF
 	select GENERIC_PHY
 	default ARCH_BCM_IPROC
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2d034459e79f..8e550269d488 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -183,7 +183,7 @@ config SPI_BCM63XX
 
 config SPI_BCM63XX_HSSPI
 	tristate "Broadcom BCM63XX HS SPI controller driver"
-	depends on BCM63XX || BMIPS_GENERIC || ARCH_BCM_63XX || COMPILE_TEST
+	depends on BCM63XX || BMIPS_GENERIC || ARCH_BCMBCA || COMPILE_TEST
 	help
 	  This enables support for the High Speed SPI controller present on
 	  newer Broadcom BCM63XX SoCs.
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 8a3ee1525d80..e3279544b03c 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1100,8 +1100,8 @@ config SERIAL_TIMBERDALE
 config SERIAL_BCM63XX
 	tristate "Broadcom BCM63xx/BCM33xx UART support"
 	select SERIAL_CORE
-	depends on ARCH_BCM4908 || ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
-	default ARCH_BCM4908 || ARCH_BCM_63XX || BCM63XX || BMIPS_GENERIC
+	depends on ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+	default ARCH_BCM4908 || ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC
 	help
 	  This enables the driver for the onchip UART core found on
 	  the following chipsets:
-- 
2.34.1

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4212 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.infradead.org/pipermail/linux-phy/attachments/20220705/b4712c5a/attachment-0001.p7s>