[PATCH v1 22/28] phy: qcom-qmp: qserdes-com-v3: add missing registers
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Tue Jul 5 02:43:14 PDT 2022
Add missing registers, verified against:
- msm-4.4's phy-qcom-ufs-qmp-v3.h
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
.../qualcomm/phy-qcom-qmp-qserdes-com-v3.h | 25 +++++++++++++++++++
.../qualcomm/phy-qcom-qmp-qserdes-txrx-v3.h | 3 +++
2 files changed, 28 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v3.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v3.h
index a61f8d36d01e..c0bd54e0e7b6 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v3.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v3.h
@@ -27,6 +27,10 @@
#define QSERDES_V3_COM_SYSCLK_BUF_ENABLE 0x040
#define QSERDES_V3_COM_PLL_EN 0x044
#define QSERDES_V3_COM_PLL_IVCO 0x048
+#define QSERDES_V3_COM_CMN_IETRIM 0x04c
+#define QSERDES_V3_COM_CMN_IPTRIM 0x050
+#define QSERDES_V3_COM_EP_CLOCK_DETECT_CTR 0x054
+#define QSERDES_V3_COM_SYSCLK_DET_COMP_STATUS 0x058
#define QSERDES_V3_COM_CLK_EP_DIV 0x05c
#define QSERDES_V3_COM_CP_CTRL_MODE0 0x060
#define QSERDES_V3_COM_CP_CTRL_MODE1 0x064
@@ -34,7 +38,10 @@
#define QSERDES_V3_COM_PLL_RCTRL_MODE1 0x06c
#define QSERDES_V3_COM_PLL_CCTRL_MODE0 0x070
#define QSERDES_V3_COM_PLL_CCTRL_MODE1 0x074
+#define QSERDES_V3_COM_PLL_CNTRL 0x078
+#define QSERDES_V3_COM_BIAS_EN_CTRL_BY_PSM 0x07c
#define QSERDES_V3_COM_SYSCLK_EN_SEL 0x080
+#define QSERDES_V3_COM_CML_SYSCLK_SEL 0x084
#define QSERDES_V3_COM_RESETSM_CNTRL 0x088
#define QSERDES_V3_COM_RESETSM_CNTRL2 0x08c
#define QSERDES_V3_COM_LOCK_CMP_EN 0x090
@@ -54,10 +61,12 @@
#define QSERDES_V3_COM_DIV_FRAC_START2_MODE1 0x0c8
#define QSERDES_V3_COM_DIV_FRAC_START3_MODE1 0x0cc
#define QSERDES_V3_COM_INTEGLOOP_INITVAL 0x0d0
+#define QSERDES_V3_COM_INTEGLOOP_EN 0x0d4
#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0 0x0d8
#define QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0 0x0dc
#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1 0x0e0
#define QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1 0x0e4
+#define QSERDES_V3_COM_VCOCAL_DEADMAN_CTRL 0x0e8
#define QSERDES_V3_COM_VCO_TUNE_CTRL 0x0ec
#define QSERDES_V3_COM_VCO_TUNE_MAP 0x0f0
#define QSERDES_V3_COM_VCO_TUNE1_MODE0 0x0f4
@@ -66,21 +75,37 @@
#define QSERDES_V3_COM_VCO_TUNE2_MODE1 0x100
#define QSERDES_V3_COM_VCO_TUNE_INITVAL1 0x104
#define QSERDES_V3_COM_VCO_TUNE_INITVAL2 0x108
+#define QSERDES_V3_COM_VCO_TUNE_MINVAL1 0x10c
+#define QSERDES_V3_COM_VCO_TUNE_MINVAL2 0x110
+#define QSERDES_V3_COM_VCO_TUNE_MAXVAL1 0x114
+#define QSERDES_V3_COM_VCO_TUNE_MAXVAL2 0x118
#define QSERDES_V3_COM_VCO_TUNE_TIMER1 0x11c
#define QSERDES_V3_COM_VCO_TUNE_TIMER2 0x120
+#define QSERDES_V3_COM_CMN_STATUS 0x124
+#define QSERDES_V3_COM_RESET_SM_STATUS 0x128
+#define QSERDES_V3_COM_RESTRIM_CODE_STATUS 0x12c
+#define QSERDES_V3_COM_PLLCAL_CODE1_STATUS 0x130
+#define QSERDES_V3_COM_PLLCAL_CODE2_STATUS 0x134
#define QSERDES_V3_COM_CLK_SELECT 0x138
#define QSERDES_V3_COM_HSCLK_SEL 0x13c
+#define QSERDES_V3_COM_INTEGLOOP_BINCODE_STATUS 0x140
+#define QSERDES_V3_COM_PLL_ANALOG 0x144
#define QSERDES_V3_COM_CORECLK_DIV_MODE0 0x148
#define QSERDES_V3_COM_CORECLK_DIV_MODE1 0x14c
+#define QSERDES_V3_COM_SW_RESET 0x150
#define QSERDES_V3_COM_CORE_CLK_EN 0x154
#define QSERDES_V3_COM_C_READY_STATUS 0x158
#define QSERDES_V3_COM_CMN_CONFIG 0x15c
+#define QSERDES_V3_COM_CMN_RATE_OVERRIDE 0x160
#define QSERDES_V3_COM_SVS_MODE_CLK_SEL 0x164
#define QSERDES_V3_COM_DEBUG_BUS0 0x168
#define QSERDES_V3_COM_DEBUG_BUS1 0x16c
#define QSERDES_V3_COM_DEBUG_BUS2 0x170
#define QSERDES_V3_COM_DEBUG_BUS3 0x174
#define QSERDES_V3_COM_DEBUG_BUS_SEL 0x178
+#define QSERDES_V3_COM_CMN_MISC1 0x17c
+#define QSERDES_V3_COM_CMN_MISC2 0x180
#define QSERDES_V3_COM_CMN_MODE 0x184
+#define QSERDES_V3_COM_CMN_VREG_SEL 0x188
#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v3.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v3.h
index 2c7238df38d7..161e6df30ea8 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v3.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v3.h
@@ -26,6 +26,8 @@
#define QSERDES_V3_TX_TX_POL_INV 0x064
#define QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN 0x068
#define QSERDES_V3_TX_LANE_MODE_1 0x08c
+#define QSERDES_V3_TX_LANE_MODE_2 0x090
+#define QSERDES_V3_TX_LANE_MODE_3 0x094
#define QSERDES_V3_TX_RCV_DETECT_LVL_2 0x0a4
#define QSERDES_V3_TX_TRAN_DRVR_EMP_EN 0x0c0
#define QSERDES_V3_TX_TX_INTERFACE_MODE 0x0c4
@@ -48,6 +50,7 @@
#define QSERDES_V3_RX_VGA_CAL_CNTRL2 0x0c0
#define QSERDES_V3_RX_RX_EQ_GAIN2_LSB 0x0c8
#define QSERDES_V3_RX_RX_EQ_GAIN2_MSB 0x0cc
+#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL1 0x0d0
#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2 0x0d4
#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3 0x0d8
#define QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4 0x0dc
--
2.35.1
More information about the linux-phy
mailing list