[PATCH 17/43] dt-bindings: phy: qcom,qmp-pcie: add missing child node schema

[Johan Hovold]

On Tue, Jul 05, 2022 at 12:18:37PM +0200, Krzysztof Kozlowski wrote:
> On 05/07/2022 11:42, Johan Hovold wrote:
> > Add the missing the description of the PHY-provider child node which was
> > ignored when converting to DT schema.
> > 
> > Also fix up the incorrect description that claimed that one child node
> > per lane was required.
> > 
> > Fixes: ccf51c1cedfd ("dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml")
> > Signed-off-by: Johan Hovold <johan+linaro at kernel.org>
> > ---
> >  .../bindings/phy/qcom,qmp-pcie-phy.yaml       | 88 ++++++++++++++++++-
> >  1 file changed, 85 insertions(+), 3 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml
> > index ff1577f68a00..5a1ebf874559 100644
> > --- a/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml
> > @@ -69,9 +69,37 @@ properties:

> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - qcom,sm8250-qmp-gen3x2-pcie-phy
> > +              - qcom,sm8250-qmp-modem-pcie-phy
> > +              - qcom,sm8450-qmp-gen4x2-pcie-phy
> > +    then:
> > +      patternProperties:
> > +        "^phy@[0-9a-f]+$":
> > +          properties:
> > +            reg:
> > +              items:
> > +                - description: TX lane 1
> > +                - description: RX lane 1
> > +                - description: PCS
> > +                - description: TX lane 2
> > +                - description: RX lane 2
> > +                - description: PCS_MISC
> > +    else:
> > +      patternProperties:
> > +        "^phy@[0-9a-f]+$":
> > +          properties:
> > +            reg:
> > +              minItems: 3
> > +              maxItems: 4
> > +              items:
> > +                - description: TX
> > +                - description: RX
> > +                - description: PCS
> > +                - description: PCS_MISC
> > +      if:
> 
> Do not include if within other if. Just split the entire section to its
> own if:.

That sounds like it would just obfuscate the logic. The else clause
specified 3-4 registers and the nested if determines which compatibles
use which by further narrowing the range.

If you move it out to the else: this would be really hard understand and
verify.

> > +        properties:
> > +          compatible:
> > +            contains:
> > +              enum:
> > +                - qcom,ipq6018-qmp-pcie-phy
> > +                - qcom,ipq8074-qmp-pcie-phy
> > +                - qcom,msm8998-qmp-pcie-phy
> > +                - qcom,sdm845-qhp-pcie-phy
> > +      then:
> > +        patternProperties:
> > +          "^phy@[0-9a-f]+$":
> > +            properties:
> > +              reg:
> > +                maxItems: 3
> > +      else:
> > +        patternProperties:
> > +          "^phy@[0-9a-f]+$":
> > +            properties:
> > +              reg:
> > +                minItems: 4

Johan