[PATCH v4 2/2] phy: amlogic: Add G12A Analog MIPI D-PHY driver
Vinod Koul
vkoul at kernel.org
Mon Jul 4 23:44:54 PDT 2022
On 16-06-22, 15:38, Neil Armstrong wrote:
> The Amlogic G12A SoCs embeds an Analog MIPI D-PHY used to communicate with DSI
> panels.
>
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
> drivers/phy/amlogic/Kconfig | 12 ++
> drivers/phy/amlogic/Makefile | 1 +
> .../amlogic/phy-meson-g12a-mipi-dphy-analog.c | 177 ++++++++++++++++++
> 3 files changed, 190 insertions(+)
> create mode 100644 drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c
>
> diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
> index 486ca23aba32..e4d1170efd54 100644
> --- a/drivers/phy/amlogic/Kconfig
> +++ b/drivers/phy/amlogic/Kconfig
> @@ -59,6 +59,18 @@ config PHY_MESON_G12A_USB3_PCIE
> in Meson G12A SoCs.
> If unsure, say N.
>
> +config PHY_MESON_G12A_MIPI_DPHY_ANALOG
this should be sorted alphabetically, so before PHY_MESON_G12A_USB3_PCIE
> + tristate "Meson G12A MIPI Analog DPHY driver"
> + default ARCH_MESON
> + depends on OF && (ARCH_MESON || COMPILE_TEST)
> + select GENERIC_PHY
> + select REGMAP_MMIO
> + select GENERIC_PHY_MIPI_DPHY
> + help
> + Enable this to support the Meson MIPI Analog DPHY found in Meson G12A
> + SoCs.
> + If unsure, say N.
> +
> config PHY_MESON_AXG_PCIE
> tristate "Meson AXG PCIE PHY driver"
> default ARCH_MESON
> diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile
> index c0886c850bb0..91e3b9790c03 100644
> --- a/drivers/phy/amlogic/Makefile
> +++ b/drivers/phy/amlogic/Makefile
> @@ -4,6 +4,7 @@ obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o
> obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o
> obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o
> obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o
> +obj-$(CONFIG_PHY_MESON_G12A_MIPI_DPHY_ANALOG) += phy-meson-g12a-mipi-dphy-analog.o
> obj-$(CONFIG_PHY_MESON_AXG_PCIE) += phy-meson-axg-pcie.o
> obj-$(CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG) += phy-meson-axg-mipi-pcie-analog.o
> obj-$(CONFIG_PHY_MESON_AXG_MIPI_DPHY) += phy-meson-axg-mipi-dphy.o
> diff --git a/drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c b/drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c
> new file mode 100644
> index 000000000000..adfcca38a952
> --- /dev/null
> +++ b/drivers/phy/amlogic/phy-meson-g12a-mipi-dphy-analog.c
> @@ -0,0 +1,177 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Meson G12A MIPI DSI Analog PHY
> + *
> + * Copyright (C) 2018 Amlogic, Inc. All rights reserved
> + * Copyright (C) 2020 BayLibre, SAS
2022 now?
> + * Author: Neil Armstrong <narmstrong at baylibre.com>
> + */
> +#include <linux/bitfield.h>
> +#include <linux/bitops.h>
> +#include <linux/module.h>
> +#include <linux/phy/phy.h>
> +#include <linux/regmap.h>
> +#include <linux/delay.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/platform_device.h>
> +#include <dt-bindings/phy/phy.h>
> +
> +#define HHI_MIPI_CNTL0 0x00
> +#define HHI_MIPI_CNTL0_DIF_REF_CTL1 GENMASK(31, 16)
> +#define HHI_MIPI_CNTL0_DIF_REF_CTL0 GENMASK(15, 0)
> +
> +#define HHI_MIPI_CNTL1 0x04
> +#define HHI_MIPI_CNTL1_BANDGAP BIT(16)
> +#define HHI_MIPI_CNTL2_DIF_REF_CTL2 GENMASK(15, 0)
> +
> +#define HHI_MIPI_CNTL2 0x08
> +#define HHI_MIPI_CNTL2_DIF_TX_CTL1 GENMASK(31, 16)
> +#define HHI_MIPI_CNTL2_CH_EN GENMASK(15, 11)
> +#define HHI_MIPI_CNTL2_DIF_TX_CTL0 GENMASK(10, 0)
> +
> +#define DSI_LANE_0 BIT(4)
> +#define DSI_LANE_1 BIT(3)
> +#define DSI_LANE_CLK BIT(2)
> +#define DSI_LANE_2 BIT(1)
> +#define DSI_LANE_3 BIT(0)
> +
> +struct phy_g12a_mipi_dphy_analog_priv {
> + struct phy *phy;
> + struct regmap *regmap;
> + struct phy_configure_opts_mipi_dphy config;
> +};
> +
> +static int phy_g12a_mipi_dphy_analog_configure(struct phy *phy,
> + union phy_configure_opts *opts)
> +{
> + struct phy_g12a_mipi_dphy_analog_priv *priv = phy_get_drvdata(phy);
> + int ret;
> +
> + ret = phy_mipi_dphy_config_validate(&opts->mipi_dphy);
> + if (ret)
> + return ret;
> +
> + memcpy(&priv->config, opts, sizeof(priv->config));
> +
> + return 0;
> +}
> +
> +static int phy_g12a_mipi_dphy_analog_power_on(struct phy *phy)
> +{
> + struct phy_g12a_mipi_dphy_analog_priv *priv = phy_get_drvdata(phy);
> + unsigned int reg;
> +
> + regmap_write(priv->regmap, HHI_MIPI_CNTL0,
> + FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL0, 0x8) |
> + FIELD_PREP(HHI_MIPI_CNTL0_DIF_REF_CTL1, 0xa487));
> +
> + regmap_write(priv->regmap, HHI_MIPI_CNTL1,
> + FIELD_PREP(HHI_MIPI_CNTL2_DIF_REF_CTL2, 0x2e) |
> + HHI_MIPI_CNTL1_BANDGAP);
> +
> + regmap_write(priv->regmap, HHI_MIPI_CNTL2,
> + FIELD_PREP(HHI_MIPI_CNTL2_DIF_TX_CTL0, 0x459) |
> + FIELD_PREP(HHI_MIPI_CNTL2_DIF_TX_CTL1, 0x2680));
> +
> + reg = DSI_LANE_CLK;
> + switch (priv->config.lanes) {
> + case 4:
> + reg |= DSI_LANE_3;
> + fallthrough;
> + case 3:
> + reg |= DSI_LANE_2;
> + fallthrough;
> + case 2:
> + reg |= DSI_LANE_1;
> + fallthrough;
> + case 1:
> + reg |= DSI_LANE_0;
> + break;
> + default:
> + reg = 0;
> + }
> +
> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL2,
> + HHI_MIPI_CNTL2_CH_EN,
> + FIELD_PREP(HHI_MIPI_CNTL2_CH_EN, reg));
> +
> + return 0;
> +}
> +
> +static int phy_g12a_mipi_dphy_analog_power_off(struct phy *phy)
> +{
> + struct phy_g12a_mipi_dphy_analog_priv *priv = phy_get_drvdata(phy);
> +
> + regmap_write(priv->regmap, HHI_MIPI_CNTL0, 0);
> + regmap_write(priv->regmap, HHI_MIPI_CNTL1, 0);
> + regmap_write(priv->regmap, HHI_MIPI_CNTL2, 0);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops phy_g12a_mipi_dphy_analog_ops = {
> + .configure = phy_g12a_mipi_dphy_analog_configure,
> + .power_on = phy_g12a_mipi_dphy_analog_power_on,
> + .power_off = phy_g12a_mipi_dphy_analog_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static int phy_g12a_mipi_dphy_analog_probe(struct platform_device *pdev)
> +{
> + struct phy_provider *phy;
> + struct device *dev = &pdev->dev;
> + struct phy_g12a_mipi_dphy_analog_priv *priv;
> + struct device_node *np = dev->of_node;
> + struct regmap *map;
> + int ret;
> +
> + priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + /* Get the hhi system controller node */
> + map = syscon_node_to_regmap(of_get_parent(dev->of_node));
> + if (IS_ERR(map)) {
> + dev_err(dev,
> + "failed to get HHI regmap\n");
> + return PTR_ERR(map);
> + }
> +
> + priv->regmap = map;
> +
> + priv->phy = devm_phy_create(dev, np, &phy_g12a_mipi_dphy_analog_ops);
> + if (IS_ERR(priv->phy)) {
> + ret = PTR_ERR(priv->phy);
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev, "failed to create PHY\n");
log the error ?
> + return ret;
> + }
> +
> + phy_set_drvdata(priv->phy, priv);
> + dev_set_drvdata(dev, priv);
> +
> + phy = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +
> + return PTR_ERR_OR_ZERO(phy);
> +}
> +
> +static const struct of_device_id phy_g12a_mipi_dphy_analog_of_match[] = {
> + {
> + .compatible = "amlogic,g12a-mipi-dphy-analog",
> + },
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(of, phy_g12a_mipi_dphy_analog_of_match);
> +
> +static struct platform_driver phy_g12a_mipi_dphy_analog_driver = {
> + .probe = phy_g12a_mipi_dphy_analog_probe,
> + .driver = {
> + .name = "phy-meson-g12a-mipi-dphy-analog",
> + .of_match_table = phy_g12a_mipi_dphy_analog_of_match,
> + },
> +};
> +module_platform_driver(phy_g12a_mipi_dphy_analog_driver);
> +
> +MODULE_AUTHOR("Neil Armstrong <narmstrong at baylibre.com>");
> +MODULE_DESCRIPTION("Meson G12A MIPI Analog D-PHY driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.25.1
--
~Vinod
More information about the linux-phy
mailing list