[PATCH phy v3 0/5] Armada 3720 comphy native implementation

Vinod Koul vkoul at kernel.org
Wed Jan 26 21:27:30 PST 2022


On 17-01-22, 15:58, Marek Behún wrote:
> Dear Vinod,
> 
> did you find time to look at this series?

Pls do not top post!

This came in just before merge window, I dont pick patches during that
time. rc1 came this monday, so this is in queue...

> 
> Marek
> 
> On Mon,  3 Jan 2022 15:32:15 +0100
> Marek Behún <kabel at kernel.org> wrote:
> 
> > Hello Vinod,
> > 
> > this is v3 of series converting A3720 comphy to native kernel
> > implementation.
> > 
> > Tested on Turris MOX and ESPRESSObin (tested all supported PHY modes:
> > ethernet, PCIe, USB3, SATA).
> > 
> > Changes since v2:
> > - removed device-tree changing patch, Gregory applied it on mvebu/dt64
> > - changed raw spin lock to ordinary spin lock
> > - fixed indentation of gbe_phy_init_fix
> > - use FIELD_PREP() macro
> > 
> > Changes since v1 (all changes in patch 2/6):
> > - refactored to use GENMASK()
> > - fixed various register names to conform to Functional Specification
> > - refactored various register names to have uniform naming
> > - refactored register access into one function, which decides whether
> >   the access should be direct or indirect, so as to not have all these
> >   checks done everywhere in the code
> > - moved around one register definition to have the registers sorted
> >   according to their offset
> > - added comments to some register definitions
> > - added support for PHY reset() method
> > - when changing PHY mode, the driver now resets the PHY and its
> >   registers to put the PHY in known state
> > - fixed the power_off() method
> > - added spinlock guard when accessing PHY Selector register, since it
> >   is shared between the PHYs and so the PHY mutex is insufficient
> > - upon driver probe changed the calls to power_off() to reset()
> > 
> > 
> > The original cover letter said:
> > 
> > The RPC calling to ARM Trusted Firmware implementation of Armada 3720
> > comphy driver caused quite a number of issues (explained more in patch 2).
> > 
> > This series fixes those issues by reimplementing the driver to native
> > kernel implementation.
> > 
> > The last 3 commits revert commits in AHCI, USB, and PCI drivers, that were
> > introduced there because of those issues.
> > 
> > Pali Rohár (5):
> >   phy: marvell: phy-mvebu-a3700-comphy: Remove port from driver
> >     configuration
> >   phy: marvell: phy-mvebu-a3700-comphy: Add native kernel implementation
> >   Revert "ata: ahci: mvebu: Make SATA PHY optional for Armada 3720"
> >   Revert "usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada
> >     3720"
> >   Revert "PCI: aardvark: Fix initialization with old Marvell's Arm
> >     Trusted Firmware"
> > 
> >  drivers/ata/ahci.h                           |    2 -
> >  drivers/ata/ahci_mvebu.c                     |    2 +-
> >  drivers/ata/libahci_platform.c               |    2 +-
> >  drivers/pci/controller/pci-aardvark.c        |    4 +-
> >  drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 1369 ++++++++++++++++--
> >  drivers/usb/host/xhci-mvebu.c                |   42 -
> >  drivers/usb/host/xhci-mvebu.h                |    6 -
> >  drivers/usb/host/xhci-plat.c                 |   20 +-
> >  drivers/usb/host/xhci-plat.h                 |    1 -
> >  9 files changed, 1245 insertions(+), 203 deletions(-)
> > 

-- 
~Vinod



More information about the linux-phy mailing list