[PATCH] dt-bindings: Improve phandle-array schemas

Rob Herring robh at kernel.org
Wed Jan 19 07:28:59 PST 2022


On Wed, Jan 19, 2022 at 4:35 AM Vladimir Oltean <olteanv at gmail.com> wrote:
>
> On Tue, Jan 18, 2022 at 07:50:38PM -0600, Rob Herring wrote:
> > The 'phandle-array' type is a bit ambiguous. It can be either just an
> > array of phandles or an array of phandles plus args. Many schemas for
> > phandle-array properties aren't clear in the schema which case applies
> > though the description usually describes it.
> >
> > The array of phandles case boils down to needing:
> >
> > items:
> >   maxItems: 1
> >
> > The phandle plus args cases should typically take this form:
> >
> > items:
> >   - items:
> >       - description: A phandle
> >       - description: 1st arg cell
> >       - description: 2nd arg cell
> >
> > With this change, some examples need updating so that the bracketing of
> > property values matches the schema.
> > ---
> (...)
> > diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> > index 702df848a71d..c504feeec6db 100644
> > --- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> > +++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
> > @@ -34,6 +34,8 @@ properties:
> >        full routing information must be given, not just the one hop
> >        routes to neighbouring switches
> >      $ref: /schemas/types.yaml#/definitions/phandle-array
> > +    items:
> > +      maxItems: 1
> >
> >    ethernet:
> >      description:
>
> For better or worse, the mainline cases of this property all take the
> form of:
>
> arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
>                                 link = <&switch1port9 &switch2port9>;
>                                 link = <&switch1port10 &switch0port10>;
> arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
>                                                 link = <&switch1port6
>                                                         &switch2port9>;
>                                                 link = <&switch1port5
>                                                         &switch0port5>;
> arch/arm/boot/dts/vf610-zii-scu4-aib.dts
>                                                 link = <&switch1port10
>                                                         &switch3port10
>                                                         &switch2port10>;
>                                                 link = <&switch3port10
>                                                         &switch2port10>;
>                                                 link = <&switch1port9
>                                                         &switch0port10>;
>
> So not really an array of phandles.

Either form is an array. The DT yaml encoding maintains the
bracketing, so how the schema is defined matters. To some extent the
tools will process the schema to support both forms of bracketing, but
this has turned out to be fragile and just doesn't work for phandle
arrays. I'm working on further changes that will get rid of the yaml
encoded DT format and validate DTB files directly. These obviously
have no bracketing and needing the DTS source files to change goes
away. However, to be able to construct the internal format for
validation, I do need the schemas to have more information on what
exactly the phandle-array contains.

Rob



More information about the linux-phy mailing list