[PATCH v6 1/3] phy: amlogic: phy-meson-gxl-usb2: fix shared reset controller use

[Amjad Ouled-Ameur]

Use reset_control_rearm() call if an error occurs in case
phy_meson_gxl_usb2_init() fails after reset() has been called ; or in case
phy_meson_gxl_usb2_exit() is called i.e the resource is no longer used
and the reset line may be triggered again by other devices.

reset_control_rearm() keeps use of triggered_count sane in the reset
framework. Therefore, use of reset_control_reset() on shared reset line
should be balanced with reset_control_rearm().

Signed-off-by: Amjad Ouled-Ameur <aouledameur at baylibre.com>
Reported-by: Jerome Brunet <jbrunet at baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
Reviewed-by: Philipp Zabel <p.zabel at pengutronix.de>
Acked-by: Neil Armstrong <narmstrong at baylibre.com>
---
 drivers/phy/amlogic/phy-meson-gxl-usb2.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
index 2b3c0d730f20..db17c3448bfe 100644
--- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
@@ -114,8 +114,10 @@ static int phy_meson_gxl_usb2_init(struct phy *phy)
 		return ret;
 
 	ret = clk_prepare_enable(priv->clk);
-	if (ret)
+	if (ret) {
+		reset_control_rearm(priv->reset);
 		return ret;
+	}
 
 	return 0;
 }
@@ -125,6 +127,7 @@ static int phy_meson_gxl_usb2_exit(struct phy *phy)
 	struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
 
 	clk_disable_unprepare(priv->clk);
+	reset_control_rearm(priv->reset);
 
 	return 0;
 }
-- 
2.25.1