[PATCH v2 8/8] dt-bindings: phy: qcom,qmp: Mark 'vdda-pll-supply' & 'vdda-phy-supply' as optional
Shawn Guo
shawn.guo at linaro.org
Mon Feb 28 19:39:13 PST 2022
On Mon, Feb 28, 2022 at 06:00:19PM +0530, Bhupesh Sharma wrote:
> Fix the following 'make dtbs_check' warnings, by marking the
> 'vdda-pll-supply' & 'vdda-phy-supply' properties as 'optional' in
> 'qcom,qmp-phy' dt-binding:
>
> arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dt.yaml:
> phy-wrapper at 88e9000: 'vdda-phy-supply' is a required property
>
> arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dt.yaml:
> phy-wrapper at 88e9000: 'vdda-pll-supply' is a required property
>
> Cc: Bjorn Andersson <bjorn.andersson at linaro.org>
> Cc: Rob Herring <robh at kernel.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma at linaro.org>
> ---
> Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 3 ---
> 1 file changed, 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> index f8a43acd229a..82b102b7d42c 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> @@ -436,9 +436,6 @@ allOf:
> items:
> - const: phy
> - const: common
> - required:
> - - vdda-phy-supply
> - - vdda-pll-supply
Not sure this change is correct. In phy-qcom-qmp driver, sm8350_usb3phy_cfg
has qmp_phy_vreg_l assignment.
static const char * const qmp_phy_vreg_l[] = {
"vdda-phy", "vdda-pll",
};
static const struct qmp_phy_cfg sm8350_usb3phy_cfg = {
.vreg_list = qmp_phy_vreg_l,
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
};
That means for "qcom,sm8350-qmp-usb3-phy" device, these two supplied are
required. The sony-xperia-sagami-pdx215 may work only because
devm_regulator_bulk_get() call in qcom_qmp_phy_vreg_init() doesn't fail
because of dummy regulator support.
Shawn
> - if:
> properties:
> compatible:
> --
> 2.35.1
>
More information about the linux-phy
mailing list