[PATCH 2/2] dt-bindings: phy: qcom,qmp: Describe 'vdda-max-microamp' & 'vdda-pll-max-microamp' properties

[Rob Herring]

On Thu, Feb 24, 2022 at 07:59:19AM -0600, Rob Herring wrote:
> On Thu, 24 Feb 2022 18:02:48 +0530, Bhupesh Sharma wrote:
> > Since a few boards based on QCoM qmp phy use the
> > 'vdda-max-microamp' & 'vdda-pll-max-microamp' properties to
> > describe the ufs phy nodes, add them to the dt-bindings doc as well.
> > 
> > This fixes the following '$ make dtbs_check' warning(s):
> > 
> > sm8350-microsoft-surface-duo2.dt.yaml: phy at 1d87000:
> >   'vdda-max-microamp', 'vdda-pll-max-microamp' do not match any of
> >    the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
> > 
> > Cc: Bjorn Andersson <bjorn.andersson at linaro.org>
> > Cc: Vinod Koul <vkoul at kernel.org>
> > Cc: Rob Herring <robh+dt at kernel.org>
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma at linaro.org>
> > ---
> >  Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> > 
> 
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
> 
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
> 
> Full log is available here: https://patchwork.ozlabs.org/patch/1597137
> 
> 
> phy at 1c07000: 'lanes at 1c06000' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
> 	arch/arm/boot/dts/qcom-sdx55-mtp.dt.yaml
> 	arch/arm/boot/dts/qcom-sdx55-t55.dt.yaml
> 	arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dt.yaml
> 
> phy at 1c0e000: 'lanes at 1c0e200' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
> 	arch/arm64/boot/dts/qcom/sc7280-crd.dt.yaml
> 	arch/arm64/boot/dts/qcom/sc7280-herobrine.dt.yaml
> 	arch/arm64/boot/dts/qcom/sc7280-idp2.dt.yaml
> 	arch/arm64/boot/dts/qcom/sc7280-idp.dt.yaml
> 
> phy at 1d87000: 'lanes at 1d87400' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
> 	arch/arm64/boot/dts/qcom/sm8450-qrd.dt.yaml
> 
> phy at 627000: 'vdda-phy-max-microamp', 'vddp-ref-clk-always-on', 'vddp-ref-clk-max-microamp' do not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
> 	arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dt.yaml
> 	arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dt.yaml

I'm curious why these are not fixed too?

Rob