[PATCH v8 13/19] drm/mediatek: dpi: Add dpintf support
Guillaume Ranquet
granquet at baylibre.com
Fri Feb 25 03:25:55 PST 2022
Quoting Maxime Ripard (2022-02-21 10:44:20)
> Hi
>
> (Now I remember your series ;)
Hi,
I'm not sure this is a good thing though :)
>
> On Fri, Feb 18, 2022 at 03:54:31PM +0100, Guillaume Ranquet wrote:
> > dpintf is the displayport interface hardware unit. This unit is similar
> > to dpi and can reuse most of the code.
> >
> > This patch adds support for mt8195-dpintf to this dpi driver. Main
> > differences are:
> > - Some features/functional components are not available for dpintf
> > which are now excluded from code execution once is_dpintf is set
> > - dpintf can and needs to choose between different clockdividers based
> > on the clockspeed. This is done by choosing a different clock parent.
> > - There are two additional clocks that need to be managed. These are
> > only set for dpintf and will be set to NULL if not supplied. The
> > clk_* calls handle these as normal clocks then.
> > - Some register contents differ slightly between the two components. To
> > work around this I added register bits/masks with a DPINTF_ prefix
> > and use them where different.
> >
> > Based on a separate driver for dpintf created by
> > Jason-JH.Lin <jason-jh.lin at mediatek.com>.
> >
> > Signed-off-by: Markus Schneider-Pargmann <msp at baylibre.com>
> > Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
> > ---
> > drivers/gpu/drm/mediatek/mtk_dpi.c | 164 +++++++++++++++++---
> > drivers/gpu/drm/mediatek/mtk_dpi_regs.h | 38 +++++
> > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 8 +
> > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 +
> > drivers/gpu/drm/mediatek/mtk_drm_drv.c | 5 +-
> > include/linux/soc/mediatek/mtk-mmsys.h | 2 +
> > 6 files changed, 198 insertions(+), 20 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > index be99399faf1bb..c5639ada868f8 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > @@ -63,6 +63,14 @@ enum mtk_dpi_out_color_format {
> > MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL
> > };
> >
> > +enum TVDPLL_CLK {
> > + TVDPLL_PLL = 0,
> > + TVDPLL_D2 = 2,
> > + TVDPLL_D4 = 4,
> > + TVDPLL_D8 = 8,
> > + TVDPLL_D16 = 16,
> > +};
> > +
> > struct mtk_dpi {
> > struct drm_encoder encoder;
> > struct drm_bridge bridge;
> > @@ -71,8 +79,10 @@ struct mtk_dpi {
> > void __iomem *regs;
> > struct device *dev;
> > struct clk *engine_clk;
> > + struct clk *dpi_ck_cg;
> > struct clk *pixel_clk;
> > struct clk *tvd_clk;
> > + struct clk *pclk_src[5];
> > int irq;
> > struct drm_display_mode mode;
> > const struct mtk_dpi_conf *conf;
> > @@ -126,6 +136,7 @@ struct mtk_dpi_conf {
> > const u32 *output_fmts;
> > u32 num_output_fmts;
> > bool is_ck_de_pol;
> > + bool is_dpintf;
> > bool swap_input_support;
> > // Mask used for HWIDTH, HPORCH, VSYNC_WIDTH and VSYNC_PORCH (no shift)
> > u32 dimension_mask;
> > @@ -384,6 +395,25 @@ static void mtk_dpi_config_disable_edge(struct mtk_dpi *dpi)
> > mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0, EDGE_SEL_EN);
> > }
> >
> > +static void mtk_dpi_matrix_sel(struct mtk_dpi *dpi, enum mtk_dpi_out_color_format format)
> > +{
> > + u32 matrix_sel = 0;
> > +
> > + switch (format) {
> > + case MTK_DPI_COLOR_FORMAT_YCBCR_422:
> > + case MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL:
> > + case MTK_DPI_COLOR_FORMAT_YCBCR_444:
> > + case MTK_DPI_COLOR_FORMAT_YCBCR_444_FULL:
> > + case MTK_DPI_COLOR_FORMAT_XV_YCC:
> > + if (dpi->mode.hdisplay <= 720)
> > + matrix_sel = 0x2;
> > + break;
> > + default:
> > + break;
> > + }
> > + mtk_dpi_mask(dpi, DPI_MATRIX_SET, matrix_sel, INT_MATRIX_SEL_MASK);
> > +}
> > +
> > static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
> > enum mtk_dpi_out_color_format format)
> > {
> > @@ -391,6 +421,7 @@ static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
> > (format == MTK_DPI_COLOR_FORMAT_YCBCR_444_FULL)) {
> > mtk_dpi_config_yuv422_enable(dpi, false);
> > mtk_dpi_config_csc_enable(dpi, true);
> > + mtk_dpi_matrix_sel(dpi, format);
> > if (dpi->conf->swap_input_support)
> > mtk_dpi_config_swap_input(dpi, false);
> > mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_BGR);
> > @@ -398,6 +429,7 @@ static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
> > (format == MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL)) {
> > mtk_dpi_config_yuv422_enable(dpi, true);
> > mtk_dpi_config_csc_enable(dpi, true);
> > + mtk_dpi_matrix_sel(dpi, format);
> > if (dpi->conf->swap_input_support)
> > mtk_dpi_config_swap_input(dpi, true);
> > mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_RGB);
> > @@ -438,6 +470,8 @@ static void mtk_dpi_power_off(struct mtk_dpi *dpi)
> > mtk_dpi_disable(dpi);
> > clk_disable_unprepare(dpi->pixel_clk);
> > clk_disable_unprepare(dpi->engine_clk);
> > + clk_disable_unprepare(dpi->dpi_ck_cg);
> > + clk_disable_unprepare(dpi->tvd_clk);
> > }
> >
> > static int mtk_dpi_power_on(struct mtk_dpi *dpi)
> > @@ -447,12 +481,24 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
> > if (++dpi->refcount != 1)
> > return 0;
> >
> > + ret = clk_prepare_enable(dpi->tvd_clk);
> > + if (ret) {
> > + dev_err(dpi->dev, "Failed to enable tvd pll: %d\n", ret);
> > + goto err_pixel;
> > + }
> > +
> > ret = clk_prepare_enable(dpi->engine_clk);
> > if (ret) {
> > dev_err(dpi->dev, "Failed to enable engine clock: %d\n", ret);
> > goto err_refcount;
> > }
> >
> > + ret = clk_prepare_enable(dpi->dpi_ck_cg);
> > + if (ret) {
> > + dev_err(dpi->dev, "Failed to enable dpi_ck_cg clock: %d\n", ret);
> > + goto err_ck_cg;
> > + }
> > +
> > ret = clk_prepare_enable(dpi->pixel_clk);
> > if (ret) {
> > dev_err(dpi->dev, "Failed to enable pixel clock: %d\n", ret);
> > @@ -462,10 +508,11 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
> > if (dpi->pinctrl && dpi->pins_dpi)
> > pinctrl_select_state(dpi->pinctrl, dpi->pins_dpi);
> >
> > - mtk_dpi_enable(dpi);
> > return 0;
> >
> > err_pixel:
> > + clk_disable_unprepare(dpi->dpi_ck_cg);
> > +err_ck_cg:
> > clk_disable_unprepare(dpi->engine_clk);
> > err_refcount:
> > dpi->refcount--;
> > @@ -497,12 +544,21 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
> > pll_rate = clk_get_rate(dpi->tvd_clk);
> >
> > vm.pixelclock = pll_rate / factor;
> > - if ((dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE) ||
> > - (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE))
> > + if (dpi->conf->is_dpintf) {
> > + if (factor == 1)
> > + clk_set_parent(dpi->pixel_clk, dpi->pclk_src[2]);
> > + else if (factor == 2)
> > + clk_set_parent(dpi->pixel_clk, dpi->pclk_src[3]);
> > + else if (factor == 4)
> > + clk_set_parent(dpi->pixel_clk, dpi->pclk_src[4]);
> > + else
> > + clk_set_parent(dpi->pixel_clk, dpi->pclk_src[2]);
>
> You get a reference to these clocks using:
> >
> > + dpi->pclk_src[1] = devm_clk_get(dev, "TVDPLL_D2");
> > + dpi->pclk_src[2] = devm_clk_get(dev, "TVDPLL_D4");
> > + dpi->pclk_src[3] = devm_clk_get(dev, "TVDPLL_D8");
> > + dpi->pclk_src[4] = devm_clk_get(dev, "TVDPLL_D16");
> > +
>
> So if the clock isn't there, you'll get an error pointer, won't check
> it, but will dereference it.
>
> If the clock is optional, you should use clk_get_optional, otherwise you
> should check the error returned.
>
> That clock setup is weird though. I don't have any knowledge about your
> platform, but either the clock should be a single one if it has multiple
> dividers, or the pixel_clk clock should behave as a mux and just pick
> the best parent for the rate it's given.
>
> Maxime
You're right about the error management... but even worse, those clocks
were removed in an earlier version of the patch [1]
I have reintroduced that bit of code in v7 by mistake when I applied
fixes coming from mediatek engineers.
I don't know anything about dp/dpi or display in general, but the design
posted by markus in v1 [2] seemed closed to what you are suggesting.
Thx,
Guillaume.
[1] https://patchwork.kernel.org/project/linux-mediatek/patch/20210816192523.1739365-3-msp@baylibre.com/#24384971
[2] https://patchwork.kernel.org/project/linux-mediatek/patch/20210906193529.718845-6-msp@baylibre.com/
More information about the linux-phy
mailing list