[PATCH v8 07/19] drm/mediatek: dpi: implement a swap_input toggle in board config
Guillaume Ranquet
granquet at baylibre.com
Fri Feb 25 02:55:41 PST 2022
Quoting Chun-Kuang Hu (2022-02-21 03:32:32)
> Hi, Guillaume:
>
> Guillaume Ranquet <granquet at baylibre.com> 於 2022年2月18日 週五 下午10:56寫道:
> >
> > Adds a bit of flexibility to support boards without swap_input support
> >
> > Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
> > ---
> > drivers/gpu/drm/mediatek/mtk_dpi.c | 14 +++++++++++---
> > 1 file changed, 11 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > index 545a1337cc899..454f8563efae4 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > @@ -126,6 +126,7 @@ struct mtk_dpi_conf {
> > const u32 *output_fmts;
> > u32 num_output_fmts;
> > bool is_ck_de_pol;
> > + bool swap_input_support;
> > const struct mtk_dpi_yc_limit *limit;
> > };
> >
> > @@ -378,18 +379,21 @@ static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
> > (format == MTK_DPI_COLOR_FORMAT_YCBCR_444_FULL)) {
> > mtk_dpi_config_yuv422_enable(dpi, false);
> > mtk_dpi_config_csc_enable(dpi, true);
> > - mtk_dpi_config_swap_input(dpi, false);
> > + if (dpi->conf->swap_input_support)
> > + mtk_dpi_config_swap_input(dpi, false);
> > mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_BGR);
> > } else if ((format == MTK_DPI_COLOR_FORMAT_YCBCR_422) ||
> > (format == MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL)) {
> > mtk_dpi_config_yuv422_enable(dpi, true);
> > mtk_dpi_config_csc_enable(dpi, true);
> > - mtk_dpi_config_swap_input(dpi, true);
> > + if (dpi->conf->swap_input_support)
> > + mtk_dpi_config_swap_input(dpi, true);
>
> In MT8173, MT2701, MT8183, MT8192, YCBCR_444 would not swap but
> YCBCR_422 would swap. But In MT8195, both YCBCR_444 and YCBCR_422
> would not swap, So I think one of these format would be abnormal in
> MT8195, right? Or would you provide more information about how this
> swap work?
>
> Regards,
> Chun-Kuang.
>
I'm not sure I have access to that level of information... and my
knowledge on mediatek
SoC is rather limited, I will circle back with mediatek engineers to
have a definite
answer.
Thx,
Guillaume
> > mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_RGB);
> > } else {
> > mtk_dpi_config_yuv422_enable(dpi, false);
> > mtk_dpi_config_csc_enable(dpi, false);
> > - mtk_dpi_config_swap_input(dpi, false);
> > + if (dpi->conf->swap_input_support)
> > + mtk_dpi_config_swap_input(dpi, false);
> > mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_RGB);
> > }
> > }
> > @@ -808,6 +812,7 @@ static const struct mtk_dpi_conf mt8173_conf = {
> > .output_fmts = mt8173_output_fmts,
> > .num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
> > .is_ck_de_pol = true,
> > + .swap_input_support = true,
> > .limit = &mtk_dpi_limit,
> > };
> >
> > @@ -819,6 +824,7 @@ static const struct mtk_dpi_conf mt2701_conf = {
> > .output_fmts = mt8173_output_fmts,
> > .num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
> > .is_ck_de_pol = true,
> > + .swap_input_support = true,
> > .limit = &mtk_dpi_limit,
> > };
> >
> > @@ -829,6 +835,7 @@ static const struct mtk_dpi_conf mt8183_conf = {
> > .output_fmts = mt8183_output_fmts,
> > .num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
> > .is_ck_de_pol = true,
> > + .swap_input_support = true,
> > .limit = &mtk_dpi_limit,
> > };
> >
> > @@ -839,6 +846,7 @@ static const struct mtk_dpi_conf mt8192_conf = {
> > .output_fmts = mt8173_output_fmts,
> > .num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
> > .is_ck_de_pol = true,
> > + .swap_input_support = true,
> > .limit = &mtk_dpi_limit,
> > };
> >
> > --
> > 2.34.1
> >
More information about the linux-phy
mailing list