[PATCH phy v4 3/5] Revert "ata: ahci: mvebu: Make SATA PHY optional for Armada 3720"

Jens Axboe axboe at kernel.dk
Thu Feb 24 07:14:58 PST 2022


On 2/24/22 8:13 AM, Marek Beh?n wrote:
> Dear Jens,
> 
> could you please send Ack for this patch?
> https://lore.kernel.org/linux-phy/20220203214444.1508-4-kabel@kernel.org/
> 
> It is a revert of another patch that was added because of potential
> problems in comphy driver, and these are now solved by this series, but
> Vinod says he can apply the ATA patch but he needs your Ack.

I'm not maintaining libata anymore, adding Damien who's the new
maintainer. Leaving email below.

> 
> Thanks.
> 
> Marek
> 
> On Thu,  3 Feb 2022 22:44:42 +0100
> Marek Beh?n <kabel at kernel.org> wrote:
> 
>> From: Pali Roh?r <pali at kernel.org>
>>
>> This reverts commit 45aefe3d2251e4e229d7662052739f96ad1d08d9.
>>
>> Armada 3720 PHY driver (phy-mvebu-a3700-comphy.c) does not return
>> -EOPNOTSUPP from phy_power_on() callback anymore.
>>
>> So remove AHCI_HFLAG_IGN_NOTSUPP_POWER_ON flag from Armada 3720 plat data.
>>
>> AHCI_HFLAG_IGN_NOTSUPP_POWER_ON is not used by any other ahci driver, so
>> remove this flag completely.
>>
>> Signed-off-by: Pali Roh?r <pali at kernel.org>
>> Signed-off-by: Marek Beh?n <kabel at kernel.org>
>> Acked-by: Miquel Raynal <miquel.raynal at bootlin.com>
>> ---
>>  drivers/ata/ahci.h             | 2 --
>>  drivers/ata/ahci_mvebu.c       | 2 +-
>>  drivers/ata/libahci_platform.c | 2 +-
>>  3 files changed, 2 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
>> index eeac5482f1d1..a57d90dd4964 100644
>> --- a/drivers/ata/ahci.h
>> +++ b/drivers/ata/ahci.h
>> @@ -240,8 +240,6 @@ enum {
>>  							as default lpm_policy */
>>  	AHCI_HFLAG_SUSPEND_PHYS		= (1 << 26), /* handle PHYs during
>>  							suspend/resume */
>> -	AHCI_HFLAG_IGN_NOTSUPP_POWER_ON	= (1 << 27), /* ignore -EOPNOTSUPP
>> -							from phy_power_on() */
>>  	AHCI_HFLAG_NO_SXS		= (1 << 28), /* SXS not supported */
>>  
>>  	/* ap->flags bits */
>> diff --git a/drivers/ata/ahci_mvebu.c b/drivers/ata/ahci_mvebu.c
>> index 3ad46d26d9d5..d4bba3ace45d 100644
>> --- a/drivers/ata/ahci_mvebu.c
>> +++ b/drivers/ata/ahci_mvebu.c
>> @@ -227,7 +227,7 @@ static const struct ahci_mvebu_plat_data ahci_mvebu_armada_380_plat_data = {
>>  
>>  static const struct ahci_mvebu_plat_data ahci_mvebu_armada_3700_plat_data = {
>>  	.plat_config = ahci_mvebu_armada_3700_config,
>> -	.flags = AHCI_HFLAG_SUSPEND_PHYS | AHCI_HFLAG_IGN_NOTSUPP_POWER_ON,
>> +	.flags = AHCI_HFLAG_SUSPEND_PHYS,
>>  };
>>  
>>  static const struct of_device_id ahci_mvebu_of_match[] = {
>> diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
>> index 18296443ccba..b26755bdc9d6 100644
>> --- a/drivers/ata/libahci_platform.c
>> +++ b/drivers/ata/libahci_platform.c
>> @@ -59,7 +59,7 @@ int ahci_platform_enable_phys(struct ahci_host_priv *hpriv)
>>  		}
>>  
>>  		rc = phy_power_on(hpriv->phys[i]);
>> -		if (rc && !(rc == -EOPNOTSUPP && (hpriv->flags & AHCI_HFLAG_IGN_NOTSUPP_POWER_ON))) {
>> +		if (rc) {
>>  			phy_exit(hpriv->phys[i]);
>>  			goto disable_phys;
>>  		}
> 


-- 
Jens Axboe




More information about the linux-phy mailing list