[PATCH 1/3] dt-bindings: phy: qcom,usb-snps-femto-v2: Add phy override params bindings

[Krzysztof Kozlowski]

On 15/02/2022 20:19, Sandeep Maheswaram wrote:
> Add support for overriding SNPS phy tuning parameters in device tree
> bindings.
> 
> Signed-off-by: Sandeep Maheswaram <quic_c_sanm at quicinc.com>
> ---
>  .../devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml  | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
> index 0dfe691..44cf3bf 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml
> @@ -50,6 +50,22 @@ properties:
>    vdda33-supply:
>      description: phandle to the regulator 3.3V supply node.
>  
> +  qcom,override_x0:

Do not use underscore in properties, but hyphen. Just like everywhere in
bindings.

This does not look like description of hardware but hard-coding some
register values. Bindings should rather describe the actual hardware
parameters instead of values written into registers.

Plus what other reviewers pointed about usefulness.

Best regards,
Krzysztof