[PATCH v2 7/9] phy: ti: tusb1210: Drop tusb->vendor_specific2 != 0 check from tusb1210_power_on()

[Hans de Goede]

Since commit eb445a15fa69 ("phy: tusb1210: use bitmasks to set
VENDOR_SPECIFIC2") tusb->vendor_specific2 always contains a valid value
so there no need to check that it is set.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 drivers/phy/ti/phy-tusb1210.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/ti/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c
index bf7793afdc84..04baed24469f 100644
--- a/drivers/phy/ti/phy-tusb1210.c
+++ b/drivers/phy/ti/phy-tusb1210.c
@@ -61,11 +61,8 @@ static int tusb1210_power_on(struct phy *phy)
 	gpiod_set_value_cansleep(tusb->gpio_cs, 1);
 
 	/* Restore the optional eye diagram optimization value */
-	if (tusb->vendor_specific2)
-		return tusb1210_ulpi_write(tusb, TUSB1210_VENDOR_SPECIFIC2,
-					   tusb->vendor_specific2);
-
-	return 0;
+	return tusb1210_ulpi_write(tusb, TUSB1210_VENDOR_SPECIFIC2,
+				   tusb->vendor_specific2);
 }
 
 static int tusb1210_power_off(struct phy *phy)
-- 
2.33.1